Only show results available in Virginia? Ok

energy monitoring system Applications

  • Measurement and control systems for the Boiler water monitoring

    In ongoing operation, the substances suspended in the boiler water are concentrated. In order to avoid the negative consequences (foaming, deposits) of excessive salt content in the boiler water, specified limit values must not be exceeded. With the aid of a desalination control valve, boiler water with concentrated content is constantly removed and replaced with clean water. If the limit values are exceeded, the conductivity limitation ensures prompt switching off of the burner(s). Foreign substances that have sunk to the bottom of the boiler are removed by briefly opening a drainage valve.

    By IGEMA GmbH based in Münster, GERMANY.

  • Gas monitoring and dust monitoring

    EM-5 series Continuous Emission Monitoring System (CEMS) Counting tail gas emission and realtime concentration NOX SO2 O2 Temperature pressure flow dust

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Air sampling & monitoring systems for energy/utilities industry

    Finding efficient ways to generate, deliver and consume energy resources while reducing pollution is an ongoing quest for the Energy & Utility Industries. HI-Q has developed instrumentation geared toward monitoring emissions and the dispersal of pollutants from power plants and industrial facilities. HI-Q base-line & stack sampling equipment has been used in studies to identify and track the spread of pollutants around the globe.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Weather Monitoring Systems for wind energy sector

    Wind power is now the world`s fastest growing alternative energy source and has also become one of the most rapidly expanding industries. For over 40 years, Climatronics has been a leading developer and manufacturer of wind measurement sensor technology to the growing wind power generation market. We offer precision weather sensors for wind energy applications such as wind resource assessment, wind turbine generator control, and wind farm performance management.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Premium

    Gas monitoring and dust monitoring for the powerplants industry

    LaserGas measurements

    • Boiler combustion control, O2 and CO
    • DeNOx system, NH3 and NO
    • Electrostatic precipitators (ESP), CO monitoring for explosion prevention
    • Stack gas emissions, NH3, H2O, NO
    • Coal silos, CO monitoring for explosion prevention and detection of smouldering fires (only in coal fired plants)

    LaserDust measurements

    • Stack gas emission
    • Coal silo, explosion prevention

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Measurement and control systems for the Indicating the level - mechanically

    Depending on the regulations, a steam boiler must be equipped with one or more direct and/ or indirect level gauges. With direct level gauges, the liquid level can be seen directly through a glass or mica window. The use of a transparent level gauge with background illumination gives operating staff a clear separation between the water and steam zones even when viewed at a relatively long distance. Bicolour level gauges (black and white or green and red) are very suitable for camera transmission to the measuring station because of their special design and the intense LED illumination. With indirect level gauges, the water level is transmitted by a magnetic system to a display panel on the outside of a pipe.

    By IGEMA GmbH based in Münster, GERMANY.

  • Measurement and control systems for the controlling the level - electronically

    Discontinuous control is used mainly in smaller steam boilers with low output since the temperature fluctuations in the boiler are fairly great as a result of irregular refilling with water. Continuous control, on the other hand, permits still more economical steam generation with high quality.

    By IGEMA GmbH based in Münster, GERMANY.

  • Weather Monitoring Systems for industrial and utility sector

    The weather can have a major impact on many industrial processes and operations, both from an operational efficiency and/or safety standpoint. For example, real-time information about ambient atmospheric conditions provides the necessary input data required to make the proper decisions during an industrial emergency involving any type of hazardous material. Depending on the plant type, size and age, the federal Environmental Protection Agency (EPA), as well as municipal and state environmental regulatory organizations, also require that a number of basic meteorological variables are measured and recorded on site to ensure compliance with environmental regulations.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Ammonit Wind Farm Monitoring Systems (SCADA)

    Once the wind farm is set up and running, its best performance has to be ensured. To do so, it is essential to monitor and check its operation. Meteo-40 can easily be integrated in SCADA (Supervisory Control and Data Acquisition) systems to provide reliable comparative meteorological data. Considering the measurement data recorded by Meteo-40, for example, predictions about the annual energy production of the wind farm can be verified. Meteo-40 records measurement data, which is used by wind farm operators and investors, as well as for forecasting reasons. With its configurable Modbus Register Map Meteo-40 is designed for operation in most existing SCADA systems. The necessary parameters are configured via the user-friendly Meteo-40 web interface.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Premium

    Meteorological Sensors for Solar Monitoring Industry

    The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in addition to the air temperature.

    By G. Lufft Mess- und Regeltechnik GmbH based in Fellbach, GERMANY.

  • Premium

    Emissions monitoring for waste incineration

    Process control and emission monitoring in a waste to energy plant is a challenge. A large number of gaseous components need to be measured with high accuracy. Almost 100% uptime is required and the monitoring system needs to be easy to maintain and fast to calibrate.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Emissions Monitoring for Power Plants

    Opsis offers fully automated system solutions for continuous monitoring in power plants. The monitoring systems have been approved by the German TÜV and the U.S. EPA among others.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Biogas Monitoring for the Renewable Energy Industry

    AppliTek`s solutions in this field concentrate on the process efficiency of anaerobic digesters. Many existing digesters give unnecessary problems, which arise due to inadequacies in the process or process control system. AppliTek has developed a unique instrument to measure and control the key processes in the anaerobic fermentation. Compact gas analyzers with proprietary technology can be implemented to check the biogas yield.

    Parameters: Volatile Fatty Acids - Alkalinity - pH - Bicarbonate

    Gas parameters: CH4 - CO2 - O2 - H2S

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Air sampling & monitoring systems for commercial nuclear industry

    Since 1973, HI-Q has directly and successfully served the commercial nuclear industry worldwide with reliable, High Quality (HI-Q), continuous duty air sampling equipment, systems and accessories. For over 30 years, our products, professional design capability, and consumables have been used in remote & internal air monitoring programs including stack sampling system designs which implement the “shrouded probe” per ANSI N13.1 1999 design specifications.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Gas analysis & monitoring system for biogas analysis

    “Biogas” means a mixture of various types of gas (mostly methane) produced by bacterial fermentation in anaerobic conditions(absence of oxygen) of organic residues from waste, decaying plant, carcasses in putrescence. The analyzers of biogas by Infrared cells carry out the continuous analysis of CH4, O2, CO2, H2S and NH3. The whole process sees the decomposition of organic material by some types of bacteria, producing carbon dioxide, molecular hydrogen and methane(methane conversion of organic compounds).

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Meteo and Wind Monitoring Wind Energy Sector

    The Renewable Energy market is expanding rapidly to reduce the dependency on traditionial energy sources and to reduce CO2 emissions in the future. Mierij Meteo offers sensors and system for many applications in the Renewable Energy market. Mierij Meteo supplies wind sensors for wind turbine control, Automatic Weathers Station for forecasting and robust and accurate sensors for research and power curve measurements (MET masts). By using Mierij Meteo sensors and systems you will ensure optimal of your wind turbines. With our MET masts you will get the most reliable data to help make your investment in renewable energy become more profitable.

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS.

  • Water Monitoring and Flow Measurement Systems for Water Power

    Hydro power contributes to supplying approximately 3,5 per cent of electric energy generated worldwide. Its share in power generation from renewable resources lies at 18 per cent and will continue to grow as resources of fossil fuels are depleted. Hydro electric performance depends essentially on the usable altitude difference between upper and lower reservoir, and hence the resulting water flow. In order to use the “fuel” water in an optimal way, the flow velocity has to be monitored without any interruptions. Ultrasonic flow meters, flow sensors and clamp-on flow meters (OR clamp-on technology) are ideal for accurate flow metering and flow monitoring.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Monitoring oil in power plant cooling water

    The Situation:

    A municipal power plant in the southern United States operates more than 10 stationary power plant engines capable of producing 52 megawatts of electric power. The plant is part of a larger statewide power grid system. Within the grid, the municipality brokers the purchase or sale of power hourly, based on the needs of municipality and the market rate for power on the grid system.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Radiation Monitoring for Nuclear Power

    The nuclear industry, including power plants, research centers and fuel cycle specialists are obliged by law to protect their staff, local populations, the environment and the processes they employ. With this in mind, Saphymo has developed a full range of dedicated products and systems, and plays a major role in radiation protection and ionizing radiation monitoring in both France and on an international scale. Saphymo constantly strives to satisfy safety requirements to the full, reinforce its technological know-how in the management of complex systems and anticipate customer needs, and offers adapted solutions in the fields of operational dosimetry, Radiation Monitoring Systems, contamination control, access control, environmental protection and survey meters. Saphymo also offers a broad panel of services intended to maintain its products in operational condition.

    By Bertin Technologies based in Montigny - Le - Bretonneux, FRANCE.

  • Biomass Plant Emissions Monitoring (CEMS)

    Procal´s analysers are used extensively in reporting and control applications in modern Biomass plants. The flexible and reliable instruments form the heart of the systems, enabling CO, NO2, NO, SO2, H2O, CO2, O2, dust and velocity to be measured.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you