Only show results in Virginia? Ok

energy resource Applications

  • Premium

    Industrial air pollution control for the energy and resources

    Fossil fuel, hydropower as well as nuclear energy continue to be the world`s predominant energy resources. Increasing efforts are being invested in the securing of new fonts of energy.  Extensive industrial research opens a broad variety of new applications for air purification.

  • Premium

    Thermal mass flowmeter solutions for energy, natural resources industries

    Flow costs money! Sierra prides itself as being a leader in energy and natural resource measurement. Sierra’s thermal flowmeters provide precise flow measurement solutions for a variety of industrial and energy-related applications. In the drive toward discovering alternative energy sources, accurate thermal flowmeter readings of gases is critical for many energy-related processes such as flare gas measurement, cogeneration, biogas measurement, district energy applications, clean coal technology and many more.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Ammonit Wind Resource Assessment in Cold Climates

    For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems robust enough for harsh and cold climates. Ammonit offers standard heating systems as well as individual heating solutions, which combine several power sources suitable for the site.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Organic Rankine Cycle for Electricity from Geothermal Resources

    Turboden ORC units can produce electricity from geothermal resources with medium to low temperature, typically ranging between 100°C and 180°C.

    Is it suitable for you?

    • Low and medium temperature geothermal systems
    • Enhanced Geothermal Systems

    By Turboden srl based in Brescia, ITALY.

  • Ammonit Solar Resource Assessment Systems

    In order to assure well-founded decisions in designing profitable solar power plants, the solar irradiance should be measured in the assessment phase. Irradiation is a crucial parameter for site selection and plant design and economics of plant. There are many different ways and technologies to measure the irradiance phenomena that influences the power generation of a future solar power plant. Ammonit’s solutions are designed to meet the latest standards with regard to accuracy and affordability of the measurement.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Premium

    Weather Monitoring Systems for wind energy sector

    Wind power is now the world`s fastest growing alternative energy source and has also become one of the most rapidly expanding industries. For over 40 years, Climatronics has been a leading developer and manufacturer of wind measurement sensor technology to the growing wind power generation market. We offer precision weather sensors for wind energy applications such as wind resource assessment, wind turbine generator control, and wind farm performance management.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Flow & Energy Management Solutions for utility & management

    There has never been a more crucial time to capture and evaluate every facet of today’s demanding energy environment. Spire Metering’s Prime Series utility meter solutions provide sustained accuracy, lead to conservation of resources, and reduce overall operational costs.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Air sampling & monitoring systems for energy/utilities industry

    Finding efficient ways to generate, deliver and consume energy resources while reducing pollution is an ongoing quest for the Energy & Utility Industries. HI-Q has developed instrumentation geared toward monitoring emissions and the dispersal of pollutants from power plants and industrial facilities. HI-Q base-line & stack sampling equipment has been used in studies to identify and track the spread of pollutants around the globe.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Air pollution control for the renewables industry

    Companies making/producing biological means to replace a resource – incorporating custom heat exchangers into the process helps lower operating costs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Ammonit Wind Ressource Assessment Systems

    Prior to setting up a wind farm, the local wind conditions have to be measured for site assessment. The construction of a profitable wind farm demand the most accurate and reliable wind measurement technology. The installed equipment has to perform as precisely as possible as the data quality is essential for designing a reliable and economical wind farm. A small discrepancy in the evaluation of wind speed data drastically multiplies the discrepancy of the calculated wind power. Wind resource assessment systems offered by Ammonit meet the highest standards of quality and are designed for the local site conditions with regard to sensor performance, communication system and power supply.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Process design & engineering services for bio-energy industry

    Bio-fuel: A Bio-fuel is a fuel that contains energy from geologically recent carbon fixation. These fuels are produced from living organisms. Bio-fuels are made by a biomass conversion from a wide range of natural and organic resources which includes solid biomass, liquid fuel and biogases. Bio-fuels have increased in popularity because of rising oil prices and the need for energy security. The two main bio-fuels are ethanol and bio-diesel; both type of fuel causes less pollution as compared to conventional diesel- powered engines and have the same performance as a regular diesel fuel.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Premium

    Industrial briquette presses for Biomass briquetting

    Harness the energy that’s inside your biomass! For too long, human and naturally produced substances have been disregarded. Straw, hay, tobacco, nutshells, miscanthus, pulse parings, cotton and flax are valuable resources for heat energy generation. The briquette shape makes your waste more cost effective to transport and ready in a saleable format. The calorific value of highly compressed briquettes is much greater than of lose material also optimising the combustibility characteristics. Additionally, explosive dust can be handled more safely. Efficient re-utilization of biomass as a cheap alternative fuel source cannot be ignored, particularly in the production of agricultural foods.

    By WEIMA based in Ilsfeld, GERMANY.

  • DeskCenter USA IT Energy Management

    DeskCenterUSA IT Energy Management Energy Management Environmental protection and sustainable, conscious use of energy and resources is a responsibility for every company. In these times of increasingly scarce resources and rising energy prices, consciousness of environmental issues must become a matter of course. The PC Energy Report 2009 shows: only 56 % of employees in the UK and Germany and 50 % of employees in the US power down their PC after work, resulting in a huge waste of money and unnecessary CO2 emissions. Here, energy saving networks and optimized processes are especially important. The Challenge A considerable part of energy costs in companies is caused by IT hardware. Here lies a big savings potential that is just waiting to be tapped. DeskCenter faces that challenge and offers solutions for quick and transparent cost reduction. DeskCenter Energy Management helps to use energy more efficiently, relieves the stress on your budget and protects the environment.

    By DeskCenter USA Inc. based in Long Beach, NEW YORK (USA).

  • Premium

    Strategic market research solutions for hydropower & renewable energy industry

    Bringing together the world’s most respected renewable energy information resources under one roof, PennWell dominates the market with an unparalleled network of publications, events and websites. Get news and information in both digital and print format, participate in trade show and conference events worldwide, understand global markets and discover expert resources for technology, finance, and policy knowledge.

    By PennWell Corporation based in Tulsa, OKLAHOMA (USA).

  • Optimized solutions for the power industry

    Preventive maintenance: extend the life of critical machine parts by as much as 500%. Castolin Eutectic is your resource for protection, wear and joining solutions. We believe in working with our customers to find the best answers to their problems. As the wear problem expert, we can provide solutions for: manufacture of new finished and semi-finished wear parts, repair of broken parts, rebuilding of worn parts, protection against wear and corrosion, choice of fusion technologies and much more. Our expertise is unequivocal, and Castolin Eutectic continues to work with every major producer in the United States, Europe and Japan.

    By Castolin Eutectic based in St-Sulpice, SWITZERLAND.

  • Forgings - Turbine Shaft, Hydro Shaft, Rotor Shaft

    Large forgings for Energy Resource

    By BORTOME | Tongyu Heavy Industry based in Qingdao, CHINA.

  • EHS & sustainability solutions for the energy oil & gas industry

    For many organizations effective EHS and sustainability management are central components of strategic planning, resource management and regulatory compliance. IHS combines software, data and expertise into a comprehensive suite of sustainability management solutions to help you assess and respond to emerging issues, meet your company`s global compliance obligations and convert business risk to opportunity.

    By IHS based in Englewood, COLORADO (USA).

  • Premium

    Water Monitoring and Flow Measurement Systems for Water Power

    Hydro power contributes to supplying approximately 3,5 per cent of electric energy generated worldwide. Its share in power generation from renewable resources lies at 18 per cent and will continue to grow as resources of fossil fuels are depleted. Hydro electric performance depends essentially on the usable altitude difference between upper and lower reservoir, and hence the resulting water flow. In order to use the “fuel” water in an optimal way, the flow velocity has to be monitored without any interruptions. Ultrasonic flow meters, flow sensors and clamp-on flow meters (OR clamp-on technology) are ideal for accurate flow metering and flow monitoring.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • motor control & energy efficiency for mine lifting machine

    Mine resource exploitation industry has formed extensive type, high consumption, and high pollution development mode for a long time and has made resource and environment difficult to bear. Therefore it is of all-important strategy significance for mine resource exploitation enterprises to realize energy conservation and emission reduction. The hoist is a conveyor which is used most extensively in mine and is simply classified as single hook type and dual hook type.

    By V&T Technologies Co., Ltd. based in shenzhen, CHINA.

  • In-process and preshipment inspection, testing and expediting of mechanical and electrical equipment for the hydropower industry

    INSPECTEAM Hydro performs the surveillance of your suppliers on your behalf by offering inspection and expediting services across Europe. Such as supervision, in-process and preshipment inspection and testing and expediting of mechanical and electrical equipment for the Hydropower industry. INSPECTEAM Hydro’s scope of work is to ascertain that products and materials meet the contract requirements, by ensuring that they conform to the design and standards specified by our clients in the purchase order and in the other contractual agreements. We have a team of qualified engineers and quality/NDT inspectors, experts in the energy sector and especially in the hydropower and water resources industry. Our team is subject to a continuous training program and offers our clients the highest technical competence and professional skill.

    By Inspecteam Hydro based in Godstone, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you