Only show results available in Virginia? Ok

energy saving Applications

  • energy saving retrofits of injection molding machines

    V&T Technologies Co., Ltd. is recognized as the leader for energy saving retrofits of injection molding machines, has rich experiences with injection molding process: 25% - 70% energy saving, general above 50% energy saving with the existing parameters. Features of asynchronous servo drive: Field oriented control Built-in PID feedback closed loop controller Built-in brake unit (up to 15kW) Double RS-485 communication interfaces (RJ-45) and standard MODBUS communication protocol Precise current detection for system protection with safety ensured

    By V&T Technologies Co., Ltd. based in shenzhen, CHINA.

  • Air Conditioning Energy Saving Systems

    Air Conditioning Energy Saver Systems, Made in England, UK saves up to 30% of Air Conditioning Energy Consumption and Electricity Bill Costs. The UK made Air Air Conditioning Energy Saver System is Ideal for the following Key Applications:- Government Buildings, Transport Terminals, Airports, Hotels, Villas and Houses, Offices, Leisure Facilities, Industrial Buildings, Clubs, Supermarkets, Restaurants, Retail, Shopping Malls, Labor Accommodation, The ETL AirCon Energy Saver System from EnviroTech (ETL) is “Manufactured in England” with distributors in: Abu Dhabi, Dubai, Sharjah, RAK, and Ajman throughout the U.A.E also in Oman, Kuwait, Egypt and Saudi Arabia will save between 20% to 30% of Air Conditioning kWh Energy Consumption and Electricity Costs by reducing the run times on the air conditioning unit compressor and increasing Energy Efficiency. This intelligent UK air conditioning energy saver system or air conditioning energy saver system will analyse the temperatures.

    By EnviroTech Limited based in Masdar City, UNITED ARAB EMIRATES.

  • energy conservation

    Liquid catalyst saving consumption of fuel sources like coal, liquid gas, bio fuel,etc

    By Energix Solutions based in jhb, SOUTH AFRICA.

  • Premium

    Thin-film solar cells analysis for energy industry

    The research and development in the field of thin-film solar cells is an on-going process to improve efficiency even further, and to reduce manufacturing costs. X-ray fluorescence (XRF) is a field proven technology enabling users to control critical properties during development and manufacturing of the solar cells, such as elemental layer thickness and composition, improving quality and productivity, with resultant cost savings.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Solar LED Street Light

    Saving energy No wire voltage, trenching or metering. No electrical bill. No CO2 emission. No fuels comsuption.

  • Evaporators technology for biogas and biofuels industries

    Combining industrial performance and sustainable development while remaining competitive requires that the biofuels and biogas industry ensure industrial process safety, reduce operational costs, implement solutions providing significant savings and comply with environmental regulations, which ultimately lead to the public’s acceptance of a site.

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Solar Powered Home UPS

    The battery charging is done through the solar panel connected to reduce the energy used from grid power and to save the electricity bills. It increases battery life because of ripple free charging from solar panel.Complete logging and monitoring of Solar (optional) The system monitors the solar energy generated from the panels and stores the cumulative KWH generated. Monitoring through communication

    By Su-Kam Power Systems Ltd. based in Gurgaon, INDIA.

  • DeskCenter USA IT Energy Management

    DeskCenterUSA IT Energy Management Energy Management Environmental protection and sustainable, conscious use of energy and resources is a responsibility for every company. In these times of increasingly scarce resources and rising energy prices, consciousness of environmental issues must become a matter of course. The PC Energy Report 2009 shows: only 56 % of employees in the UK and Germany and 50 % of employees in the US power down their PC after work, resulting in a huge waste of money and unnecessary CO2 emissions. Here, energy saving networks and optimized processes are especially important. The Challenge A considerable part of energy costs in companies is caused by IT hardware. Here lies a big savings potential that is just waiting to be tapped. DeskCenter faces that challenge and offers solutions for quick and transparent cost reduction. DeskCenter Energy Management helps to use energy more efficiently, relieves the stress on your budget and protects the environment.

    By DeskCenter USA Inc. based in Long Beach, NEW YORK (USA).

  • Premium

    Applications and Air Pollutants Removed for Marine Power Plants

    Control of ship diesel engine emissions to meet MARPOL requirements for particulate ash and soot, sulfur dioxide and NOx. Special compact inline stack mounted space saving designs. Both open loop arrangements using sea water or closed loop using a range of chemical solutions.  Complete system offerings.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Recycling equipments for aluminium recycling

    Aluminium items are eminently suited to recycle. Did you know that aluminium can be recycled infinitely without losing quality? Recycling aluminium beverage cans saves 95% of the energy used making an aluminium can, compared to making it from raw bauxite. The energy saved from recycling one aluminium Coca Cola can will run a TV for three hours. If not recycled, it takes 80-100 years for an aluminium can to break down in a landfill.

    By Eldan Recycling A/S based in Faaborg, DENMARK.

  • Premium

    Chemical Water Treatment for membrane treatments

    Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to run these plants under environmentally friendly and beneficial economic conditions. Special attention is given to an efficient utilization of energy as well as saving precious water. Kurita develops an efficient and effective treatment concept achieving an optimal economic operation and a maximum operational reliability of a plant.

    By Kurita based in Ludwigshafen, GERMANY.

  • Premium

    Reliable Shredding Technology for Metal-processing Industry

    Regardless of whether your metal waste comes from the metal-processing industry, automotive industry, electronics industry, waste industry or commercial production, we will always offer you the right shredding system for recycling your valuable resources! Metals are important raw materials for the industry and can be repeatedly returned to the recovered resource cycle with very little loss. The recycling of metals saves valuable raw materials and energy as opposed to the new processing of ores.  Our sturdy rotary shears that have been tried and tested a thousand times over, reliably and efficiently shred light metals such as aluminium, magnesium, Al-Mg alloys, copper or nickel, as well as harder metals such as iron, zirconium, titanium and sheet steel.

    By UNTHA Shredding Technology based in Kuchl, AUSTRIA.

  • Premium

    Metal Sorting - End of Life Vehicles Scrap Sorting

    Using modern TOMRA sorting technology you can generate clean non-ferrous metal fractions in your daily shredder operation. The processing of valuable scrap metal gains more and more importance worldwide. The aim is to generate clean, mono-fraction products from this very complex stream of End of Life Vehicles scrap metal material using suitable separation procedures. And that is worthwhile; End of Life Vehicles scrap processing does not only preserve natural resources of raw material, but it is also considerably cheaper. Compared to the aluminium production from primary raw material, using secondary material from End of Life Vehicles saves around 90% of the energy demand.

    By TOMRA Sorting (TITECH) based in Mülheim-Kärlich, GERMANY.

  • Premium

    Industrial shredders system for wood inddustry

    It’s more than just wood!  It is an invaluable sustainable resource which can be utilised down to the last splinter. With WEIMA wood shredders there are no limits. Woodchips can be used directly for energy generation or for briquetting. Valuable space can be saved for more productive uses. WEIMA has the know-how covering all the relevant factors for a most efficient and homogenous wood shredding solution.

    By WEIMA based in Ilsfeld, GERMANY.

  • Premium

    Water quality monitoring for municipal drinking water industry

    Real Tech offers solutions that can provide substantial benefits to drinking water treatment plants. Continuous online monitoring can ensure water quality standards are met without the need for chemical overdosing while maintaining high confidence in the safety of the treated water. Significant cost savings can be achieved by optimizing coagulant dosage, reduced sludge production and reduced energy requirements.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Premium

    Analytical and measuring instruments of environmental

    The environmental field requires robust, high-sensitivity analysis capable of complying with regulations in order to always meet the stringent target values that have been established to assure the safety of the water supply and protect the environment. Moreover, in laboratories where more than 100 samples are processed per day, increasing the throughput and saving energy are issues of concern.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Innovative pump technology for industrial engineering industry

    Reliably delivering liquids in different states for various tasks with high efficiency – technical, economical and energy saving. EDUR have held a leading position in this field over decades.

  • Premium

    Air cleaning system for the K-12 education

    The grades are in: a 2006 national report,Greening America’s Schools, concluded that environmentally friendly school buildings lead to lower operating costs, improved test scores, and enhanced student health. The report, produced by Capital E and co-sponsored by The American Institute of Architects (AIA), concluded that environmentally friendly schools save an average of $100,000 each year. The study examined 30 green schools built between 2001 and 2006, and determined that the total financial benefits of green schools are 20 times greater than their initial cost difference. Measurable benefits include energy and water savings, improved student health and higher test scores.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • Premium

    Shredding and crushing systems for Food waste and handling of garbage and food waste

    Organic waste can become a problem anywhere where the disposal of waste occurs over a longer period. This challenge arises for example in the shipping industry. With Mercodor waste food shredders valuable space is saved and food protected from contamination. The processed food leftovers serve as the raw material for biodiesel production or are used for the production of green energy in the form of electricity and heat from biogas plants.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • EcoTex laundry systems for senior care

    Faced with soaring utility costs and the high risk of infection spread, senior care laundry facilities can benefit greatly with an EcoTex ozone system. With an EcoTex System in place, a laundry room can achieve superior disinfection, reducing energy consumption, increasing wash quality, extending linen life, and be environmentally green. An EcoTex Laundry System starts saving money and improving wash quality the moment it’s installed. Much of the savings stems from reducing wash temperatures from 180o F to 50o F and cutting a laundry’s operation from eight hours to six hours per day.

    By ClearWater Tech, LLC - part of Aquion, Inc. based in San Luis Obispo, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you