Only show results available in Virginia? Ok

energy storage Applications

  • Energy Storage

    The K&S Engineering company as a technology 'know-how' supplier has prepared algorithms for optimizing energy storage systems and developed a new simulation tool for it. Using this special simulation software, not only the major yield forecasts for the investors are done in detail, but it is also possible for the applied control algorithms to perform optimizations. With this, K&S offers a consultancy service combining photovoltaic-energy-storage-system design and the perfectly match of the upcoming control algorithms to be applied. As a supplementary service for investors and banks, K&S performs a technology and supplier evaluation in an technical risk assessment regarding the project. A first project with >30 MWp installed capacity in Japan with special requirements of the energy supplier and a nearly 20 MW battery power has already successfully been modeled by the K&S experts. For mor details please visit www.krugundschram.com

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

  • Biodiesel Storage

    By Steel Tank and Fabricating Corp. based in Columbia City, INDIANA (USA).

  • Coal storage for the energy industry

    CST Covers aluminum domes are custom designed around a bulk storage facilities specific clearance requirements, basin configuration and bulk handling equipment. Structurally efficient and lightweight, they maximize bulk storage capacity, minimize foundation costs and provide dependable protection form the elements while remaining virtually maintenance free.

    By CST Industries Inc based in Gardena, CALIFORNIA (USA).

  • Bulk Fuel Storage

    By Steel Tank and Fabricating Corp. based in Columbia City, INDIANA (USA).

  • Residential and Commercial, Underground Thermal Energy Storage

    PROJECT OVERVIEW: Large residential and commercial project in London, overlooking the Thames. A 2.9MW cooling and heating aquifer thermal energy storage system for five mixed-use buildings including over 200 luxury apartments.

    By Boode Waterwell Systems based in Zevenhuizen, NETHERLANDS.

  • Markthal: Aquifer Thermal Energy Storage

    PROJECT OVERVIEW: The iconic Markthal in Rotterdam. Supply of unique 0.4mm vertical slot PVC screen for the Aquifer Thermal Storage Energy system at Markthal, a 95,000m2 residential and commercial building with an indoor market hall.

    By Boode Waterwell Systems based in Zevenhuizen, NETHERLANDS.

  • Premium

    Water Storage for the Bioenergy Industry

    Superior Tank Co., Inc.  has a proven track record of designing and manufacturing factory-powdered coated bolted and welded steel storage tanks for the most challenging projects. Superior Tank’s staff of engineers can design and manufacture a tank that will fit your unique needs.

    By Superior Tank Co., Inc. based in Rancho Cucamonga, CALIFORNIA (USA).

  • Storage and cover solution for bioenergy industry

    CST Industries is the world`s leading complete storage and cover solution provider for BioEnergy applications.

    By CST Industries Inc based in Kansas City, MISSOURI (USA).

  • Premium

    Oil Spill Eater II (OSE) for Energy storage and fuel storage leaks

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Biogas to Elecricity

    The range of supply of biogas to electricity solutions is from 10 kW to 1 MW. All the components of the solution are provided with matching capacities. It comprises the biogas digester system of the desired capacity, gas storage, biogas cleaning system to get rid of H2S from the gas, and the biogas genset. In the digester system, one may have a pre-digester or a feed mixing chamber or both. On the post-digester side, liquid from the slurry is separated and is recycled for feed preparation. It reduces the overall fresh water demand of the scheme. The digester itself may be temperature controlled and the input for the same could be given from heat recovery of the genset or from a solar heating system or from any other heat source as the case may be.

    By Kirloskar Integrated Technologies Limited based in Kothrud, INDIA.

  • Alternative Fuel Production

    Superior Boiler Works, Inc. led the way in Ethanol production in the USA with more installed firetube boilers in Ethanol plants than any other manufacturer. Ethanol requires the distillation of sugars into an alcohol fuel. Superior’s products are used to generate heat needed for the ethanol distillation processes, heating storage tanks as well as batch reactors. Additionally, Superior Boilers can be fitted with packaged burners which fire a variety of fuels from tallow to syngas to Hydrogen and most anything in between.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Premium

    Waste recovery for nuclear wastes

    Nuclear waste is divided into low, medium, and high‐level waste by the amount of radiological character it contains. Low and Intermediate Level Nuclear waste is the radioactive waste resulting from nuclear facility consumables, clothing, laboratory equipment etc. This waste can adversely affect human health and the environment and therefore must be handled appropriately. Typically, the waste is kept underwater for 3-5 years until the radiation decays to levels that can be shielded by concrete in large storage casks, where it can be held for thousands of years. A challenge for the nuclear industry is the cost associated with conditioning, packaging and storage of these heterogeneous wastes. Therefore, a solution that can decrease the volume of nuclear waste, and reduce the amount of storage required, is considered a commercially advantageous option.

    By Tetronics (International) Limited based in Swindon, UNITED KINGDOM.

  • Premium

    Applications and Air Pollutants Removed in the Biomass Industry

    Flue gas particulate and acid gases from biomass and bagasse boilers. Removal of ethanol, CO2 scrubbers and yeast cells from fermenters.  Removal of ash particulate, tars, acid gases and ammonia from steam reformers, gasifiers, pyrolosis units and cooling of syngas streams to acceptable limits to enable use as a fuel source for power generation or as a feedstock for chemical products. For tar removal, combination technologies can be used including oil based scrubbing solutions to reduce waste water generation. Ethanol and yeast cell removal from fermenter off-gases. Methanol from processing operations. Hydrogen sulfide removal on landfill, digester and producer gases with regenerable chemistries. Odor control for biomass storage facilities including carbon monoxide removal in wood chip storage areas. 

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Pulsair`s industrial mixers for biodiesel fuel industry

    Pulsair Systems manufactures the most efficient and effective storage tank mixing process for blending and agitating biodiesel fuel. The efficient Pulsair mixing process is well suited for the high viscosity and heavy fluid characteristic of biodiesel. Pulsair offers a complete line of off the shelf biodiesel fuel mixers and agitators for mixing in a 55-gallon drum or larger 250 - 1 million+ gallon tanks for biodiesel fuel storage or production. Pulsair biodiesel fuel mixers are explosion proof and safe for biodiesel mixing. Biodiesel is a flammable product and the fire risks are reduced when using the Pulsair mixing process because our mixers do not require electricity at the mixing site. This improves the overall safety of the biodiesel production process and biodiesel fuel storage tank mixing and agitation.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Premium

    Organic waste shredding with Mercodor shredding systems

    The organic waste shredding of food waste and other organic wastes are used to prepare an environmentally friendly energy, for example in biogas plants. In addition to the production of electricity or heat through biowaste serve shredded organic waste / food and the production of biodiesel. The organic waste shredding is used wherever a longer storage of bio-waste is really necessary, such as on cruise ships.

    By MERCODOR GmbH Sondermaschinenbau KG based in Frankfurt am Main, GERMANY.

  • Mined Landfill

    Mining landfill is an innovative practice, which is a paradigm shift in waste management, where landfills can be considered storage of feedstock for waste to energy plants such as Gasplasma®. It works by: Extracting buried waste / Recovering valuable recyclates: glass, metals, hard plastics / Returning land for alternative uses / Eliminating greenhouse gas emissions caused by decomposing wastes

    By Advanced Plasma Power (APP) based in Swindon, UNITED KINGDOM.

  • Pulsair`s industrial mixers for chemical industry

    Pulsair Systems supplies chemical mixing equipment for the worldwide chemical industry. Pulsair has designed and manufactured industrial chemical mixing and blending equipment for over 25 years. Our non-shear industrial chemical mixing systems are highly energy efficient, easy to use and maintain, cost-effective and well suited for any chemical storage tanks and mixing process regardless of the chemical tank size, number of tanks or viscosity of the chemicals. Pulsair offers a full range of chemical equipment tank mixers for both chemical production and storage tanks that include a 5 to 55 gallon drum mixer, a tote mixer (stainless steel, plastic, cardboard or `bag in a box`) and an IBC mixer (Intermediate Bulk Containers). For larger individual chemical mixing tanks as well as tank farms, we offer custom built mixing solutions.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Cloud software solutions for hospitals

    You simply can`t afford a stinging environmental rebuke from the EPA or your state regulatory agency. Not only can fines be expensive, the reputational costs are inexcusable. You`ve invested far too much building trust in your community to take such a risk. The new proposed EPA regulations mean every facility that stores fuel must conform to a higher standard of due diligence. Failure to do so can mean heavy fines, increased liability, and deep brand damage. These new regulations augment and put teeth into the Energy Policy Act of 2005, which now expands to encompass all facilities that store fuel. Compliance requires monthly visual inspections and very specific record-keeping practices, best managed on a secure cloud solution. Titan cloud software keeps hospitals and related facilities on the high road, above the risks of regulatory non-compliance. It is the leading environmental compliance management software in the industry, currently managing over 60,000 USTs (Underground Storage Tanks), as well as thousands of ASTs (Above Ground Storage Tanks). Simply subscribe to Titan, and you`re well on your way to maintaining 100% compliance.

    By Titan Cloud Software Company, LLC based in Brentwood, TENNESSEE (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you