M&K plants divert Construction and Demolition waste from landfill by separating the waste into materials such as Hardcore, Soils, Wood(s), Metals, Stone, Cardboard, Paper and Plastic at the lowest possible cost per ton.
M&K Construction and Demolition Waste Recycling Systems combine manual as well as automated sorting with the latest in feeding, screening & separation technology, allowing contractors to efficiently separate, sort and recover a wide variety of material types.
What is Construction and Demolition...
Safe and Economical Solutions for Site Work. Presto Geosystems has a 35+ year proven track record in civil site construction and restoration solving soil stability and access challenges. Through infill confinement, Presto’s GEOWEB 3D geocells reduce cross-sectional requirements by 50% or more for tracking pads, construction staging areas, access roads and work platforms – and they perform well over soft ground. The safest and most economical portable mats, GEOTERRA, offer fast, temporary site access.
Measurement of particulates, SO2, NOx, hydrocarbons and greenhouse gas emissions from the cement manufacturing industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.
The GEOWEB system’s ability to effectively spread loads allows it to bridge and distribute loads to fewer pile cap columns, increasing the spacing between columns compared to traditional concrete pile cap systems. This reduction in pile cap columns significantly decreases costs on a project. When compared to geogrid solutions for minimizing columns, the GEOWEB® LTP system can be constructed with less expensive sand infill instead of aggregate/gravel. Deployment operations do not require low pressure...
Construction waste consists of unwanted material produced directly or incidentally by the construction industry. This includes materials that may contain lead, asbestos or other hazardous materials. There is increasing pressure on the construction industry to dispose of this hazardous material in an environmentally responsible manner. Tetronics can help alleviate this pressure by providing waste recovery plants to deal with all types of hazardous wastes generated from a construction projects lifespan: from land...
Construction can be a industry where high noise levels are common and where both occupational and environmental noise monitoring may be needed. The measurement and monitoring of noise from construction sites can be carried out using a range of different instruments depending upon the time over which the measurements need to be made.
Contec oil mist separators ensures the façade design of ETFE cushions for efficient and environmentally friendly glare-, heat- and UV-protection. Contec GmbH, Bad Honnef is a leading manufacturer of filtration systems, oil mist separators and liquid level measuring technology. The use of the Contec oil mist separator (COMS) in the field of building construction is definitely very innovative and our system has proven again its advantages in environmental aspects.
By implementing a noise and vibration monitoring system, the impact of construction site activities can be managed by: Complying with legal requirements relating to public health sanctioning the absence of appropriate precautions to limit abnormally high levels of noise and vibrations. Taking environmental quality considerations into account (HQE approach). Limiting noise and vibration pollution with the comfort of neighbouring residents in mind. Enabling companies in the public works and construction industry to...
Cirrus Environmental can supply a range of noise measurement options for construction and demolition noise applications. These range from handheld sound level meters for taking noise measurements through semi-permanent noise monitors to permanently installed noise monitoring systems, all designed to be fully weather protected for reliable long term operation.
The construction sector and its wide range of associated activities are very varied and from a noise monitoring perspective offer many unique challenges. However, Pulsar Instruments have a solution; a construction Pulsar noise meter with the ability to effectively assess the following two key categories; Noise at Work (potential for noise induced hearing loss due to long term exposure to noisy activities). Environmental Noise (the potential to cause annoyance to surrounding areas or buildings during site work).
The XL2 Sound Level Meter provides the dedicated solution for monitoring environmental noise in industry and communities. It measures levels and detailed spectral information in parallel and stores the data on an SD card for post-processing and reporting. A linear audio file (wav-file) may be recorded for detailed simultaneous analysis.
The type approved class 1 sound level meter offers a flexible handheld instrument with accurate and reliable measurements. Data recording can be scheduled to occur at pre-determine...
• Environmental Impact Assessment (EIA) is a complex of measures aimed to identify the character, intensity and severity of impact on the environment and public health caused by any kind of planned economic activity.
• The purpose of an EIA is to develop the necessary measures to prevent the harmful effects of the proposed economic activity on the environment or minimization of this influence if you can’t eliminate it. EIA is carried out during the design phase, before the construction of the facility.
• As a...
ENTACT holds alliance contracts or master service agreements with most of the major energy companies in the United States. These service agreements were awarded and are maintained based upon health and safety culture and metrics, competitive pricing, and depth of experience. Our experience includes environmental and geotechnical construction projects at active refineries, exploration and production sites, terminals, pipelines, and abandoned properties.
Envirotac line of polymers have been used to construct roads around the world. Our polymers cross link the soils at a nano level creating a tough durable surface that will stand up to Heavy Haul trucks and the daily grind of vehicular traffic. If you are using Chlorides, Lignin`s, or Enzymes, make the switch to a superior road stabilizing technology.
Envirotac has been used for dust control / soil stabilization on numerous BMX tracks throughout the United States. Its not uncommon for Nationals to be hosted on an Envirotac stabilized surface. When constructing turns and jumps incorporate Envirotac into the soil to keep the shape of the jump or turn and have a dust free surface that will hold up to rain and snow.
Envirotac line of polymers perform exceptionally well in constructing parking areas. Whether it be in-situ soils, road base, gravel, recycled asphalt, or decomposed granite Envirotac will lock the particles in place. It is great at controlling dust, preventing ruts and washboarding , and increasing the surface strength. Carbon black can be added to make the area look like asphalt and stripes can be painted over the surface.
Fire access roads are required are on most construction sites. The psi requirement for a 80,000 lb Heavy Fire Truck & H-20 loading is 110 PSI. With the use of our Envirotac line of polymers you will achieve much greater than the max PSI amount required at a fraction of the cost of building a fire access road with traditional means.
Dynamic Air Quality Solutions is proud to be a member of the U.S. Green Building Council (USGBC). The Leadership in Energy and Environmental Design (LEED) Green Building Rating System is the benchmark for the design, construction, and operation of high performance green buildings. LEED gives building owners and operators the tools they need to have an immediate and measurable impact on the environment and their buildings` performance.