Only show results available in Virginia? Ok

environmental damage Applications

  • Multispectral Imaging for Environmental Management

    GeoVantage digital multispectral imaging enables large-scale environmental changes such as fire damage, flooding, erosion, or chemical spills, to be quickly located and quantified. Recurrent issues can be tracked over time by comparing imagery taken at different intervals. This approach allows for the most effective containment and solution planning.

    GeoVantage customizes each imagery collection plan to optimize your environmental management objectives, including vegetation delineation, pervious/impervious mapping, water quality, and change detection.

    By GeoVantage based in Peabody, MASSACHUSETTS (USA).

  • Premium

    Surface water quality testing for the environmental monitoring industry

    Aquaread stock a wide range of testing equipment designed to track a number of parameters and water quality testing measures. These can be used in many different bodies of water, including rivers, lakes, streams and seawater. The advantages of tracking water quality and testing for numerous parameters means that it is easier to notice changes which could cause damage to aquatic ecosystems. Early detection not only helps with monitoring water quality, but also helps to put mitigating measures in place. We have a wide range of parameters, although the most popular of these allow for surface water testing, pH, temperature, electrical conductivity and measuring levels of dissolved oxygen. These are standard measurements included in most standard Aquaprobes, although if you require more specific parameter testing then there are a number of additional parameters which can be added onto to the base Aquaprobe to compensate this.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Bag Filter Plants

    Triboelectric dust probes installed in the clean gas duct after bag filters, cartridge filters or centrifugal separators (cyclones) are used to detect faulty, damaged or leaking filters. This early detection of failures minimises product loss, improves environmental conditions and problematic dust emissions. Benefits include low initial outlay, no consumables and low maintenance requirements. There are more than 10,000 Dr. Foedisch filter monitor devices installed worldwide in the food processing, cement, foundries, quarries, recycling and chemical industries.

    By CEM Solutions (UK) Ltd. based in Darley Dale, UNITED KINGDOM.

  • Premium

    Environmental solutions for the geomembrane protection

    High-Strength Protection of Geomembrane Liners. As a protective cover for geomembranes for closure caps and stormwater ponds, the GEOWEB system prevents liner damage and degradation. With infill confined in the GEOWEB system, slopes can be designed steeper while maintaining strength and integrity, even when subjected to settlement - common in landfills.  The landfill cover system can be designed as a vegetated, aggregate armored, or concrete solution that remains flexible.  GEOWEB liner protection is a ‘complete solution’ including integral tendons and ATRA tendon load transfer clips.

    By Presto Geosystems based in Appleton, WISCONSIN (USA).

  • Environmental Impacts & Land-based Operations Monitoring

    - Provide transparency and evidence to support assertions on impacts and remediation - Efficient interaction with stakeholders, regulators and NGOs - Early warning and monitoring of critical issues such as damage to ecosystems, water table changes, windblow.

    By Ecometrica based in London, UNITED KINGDOM.

  • Premium

    Mining & minerals solutions for acid mine drainage industry

    Through the application of modern mining technologies, WesTech helps to assure that the byproducts of minerals extraction process are made inert, reliably contained and kept from causing environmental damage. Implementation of WesTech tailings processing technology assures protection of the groundwater, surface waters, wildlife and communities which in the past have been the victims of tailings dam leaks and levy failures.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Geotextiles solutions for landfills areas

    Historically, landfills have been the most common method of organized waste disposal and remain so in many places around the world. Landfills  are essential applications to ensure long service life and prevent soil pollution. In industrial basins, TenCate protection geotextiles guarantee the protection of the geomembrane against all risks of mechanical damages. A cost effective and environmental friendly solution to sort, treat and recycle waste.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Premium

    Ultraviolet disinfection systems for the produced water treatment

    With environmental regulations becoming more stringent, and the link between re-injected water quality and operational costs becoming clear to operators, investing early in advanced water treatment solutions for produced water for both reinjection applications and environmental discharges is now a top priority for operators worldwide.  atg UV Technology have provided a number of specialist UV packages for the disinfection of Produced Water in order to reduce microorganisms such as SRB’s (Sulphate Reducing Bacteria), Acid Producing Bacteria and Slime Forming Bacteria, that if left untreated, pose a range of negative consequences including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection, Plugging of the well, Damage of equipment and components (e.g. RO membranes, filters).

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Premium

    HCl Monitoring in Air

    Hydrogen chloride (HCl) is a colorless, sometimes slightly yellow, gas. It is an undesired environmental component that may be damaging to workers and the surroundings. Exposure limits have thus been established by industries to make sure that the workers operate in a safe environment. HCl monitoring is especially required for incinerators, coal-fired power plants, aluminum recycling and cement plants. Unisearch offers a reliable and easy-to-use HCl analyzer – the TDLAS-based LasIR system. Studies have shown that TDLAS equipment provides data that is more accurate than conventional gas monitoring equipment. When calibrated for HCl monitoring, TDLAS is able to detect this gas among other gases present in the area and provide continuous updates with regards to the changes in its concentration.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Thermal structures for emissions / after treatments industry

    Every year emissions standards become more stringent. More stringent standards often require elevated exhaust temperatures. Thermal Structures products have been developed specifically to deal with these increased temperatures. By isolating and managing elevated exhaust temperatures, Thermal Structures enables operators to meet more stringent emissions standards without risking damage to sensitive components. Our products help to make environmental resposibility an easy choice.

    By Thermal Structures, Inc. based in Corona, CALIFORNIA (USA).

  • Measurement solution for NH3 emissions from livestock enclosures

    Ammonia (NH3) is formed from the breakdown of urea in slurry and manure, and hence this is the main source of NH3 emission in the UK. High levels of NH3 emissions can cause a large amount of environmental damage to vegetation. As well as the outward environmental impact, high NH3 concentrations in and around livestock enclosures have a detrimental effect on the health and well-being of the animals.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Combustible Aluminium, Titanium and Magnesium Dust Collection

    The consequences of an industrial dust explosion or fire are unthinkable - worker injury, loss of life, property damage, business interruption, and irreversible environmental harm. Few companies realize how many diverse and common industrial applications produce combustible particulates, or where in their facilities this catastrophic threat is settling. What is a combustible dust? “A combustible particulate solid that presents a fire or deflagration hazard when suspended in air or other oxidizing medium over a range of concentrations, regardless of particle size or shape” – NFPA 654? High Risk Applications Metalwork (aluminum, magnesium, or titanium and others) – cutting, grinding, or finishing Ceramics – raw product handling and enamel spray Chemicals – material handling, crushing, grinding, roasters, kilns, and coolers Coal mining – material handling, de-dusting, drying, air cleaning Food (flour, sugar, and others) – mixing, grinding, blending, bagging, and packaging Foundry – sand handling, tumbling mills, abrasive cleaning, and shakeout Pharmaceutical – mixing, grinding, blending, bagging, and packaging Rubber – mixing, grinding, talc dusting, de-dusting, and batch-out rolls Woodwork – woodworking machines, sanding, waste conveying?

    By DiversiTech Inc based in Montreal, QUEBEC (CANADA).

  • Cloud software solutions for hospitals

    You simply can`t afford a stinging environmental rebuke from the EPA or your state regulatory agency. Not only can fines be expensive, the reputational costs are inexcusable. You`ve invested far too much building trust in your community to take such a risk. The new proposed EPA regulations mean every facility that stores fuel must conform to a higher standard of due diligence. Failure to do so can mean heavy fines, increased liability, and deep brand damage. These new regulations augment and put teeth into the Energy Policy Act of 2005, which now expands to encompass all facilities that store fuel. Compliance requires monthly visual inspections and very specific record-keeping practices, best managed on a secure cloud solution. Titan cloud software keeps hospitals and related facilities on the high road, above the risks of regulatory non-compliance. It is the leading environmental compliance management software in the industry, currently managing over 60,000 USTs (Underground Storage Tanks), as well as thousands of ASTs (Above Ground Storage Tanks). Simply subscribe to Titan, and you`re well on your way to maintaining 100% compliance.

    By Titan Cloud Software Company, LLC based in Brentwood, TENNESSEE (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you