GPR and EM play an integral part by providing a non-intrusive means of examining the subsurface for environmental hazards such as soil contamination, underground storage tanks and drums. GPR can delineate landfills and pathways for contaminant flow, as well as conduct hydrogeologic investigations such as water table mapping. We offer innovative technology to support site assessment needs.
The Q EHS Environmental Reporting suite provides key tools for compliance with
environmental legislation pertaining to the management, storage, use release, and disposal
of hazardous materials.
The software was developed to produce a variety of practical reports
• Performance and compliance assessments
• Regulatory report submittals
• Metrics and trend analyses for facility, divisional, and corporate management
• On-site environmental incident occurrences
Q EHS Air - Q EHS Waste - Q EHS Water - Q EHS...
Gasplasma® uses a DC Plasma Converter to crack impurities from the raw syngas. The intense heat and strong UV light produced by the Plasma Arc neutralises hazardous wastes, such as sludge and oils, creosote and other preservatives and chemicals. Gasplasma® transforms the organic parts of the waste into a hydrogen-rich syngas that is used to generate clean, renewable power and renewable heat. The second stage Plasma Converter makes hazardous elements inert and all the inorganic materials are vitrified into an...
The OZONATOR technology is the new NG-3000 model capable of processing up to 400 kg (880 lbs.) of waste every twenty minutes (1200 kg per hour) and can operate on a continuous basis 24 hours per day – 7 days per week with about one hour per week for service and cleaning. The waste is shredded with up to 90% reduction in volume and treated with a high concentration of ozone (sterilized) and then compacted into a stainless steel transport bin for disposal at landfill as general waste (daily cover) or the treated...
TenCate Geotube technology helps to dewater and contain contaminated sediments in rivers, bays, harbors, marinas, ports, dock facilities, hydro basins and other waterways. In many cases, these sediments pose significant environmental hazards, and remediation is a difficult and expensive task.
Environmental Service Worker II – FT Geauga
Ability to clean patients rooms, public spaces and the collection of trash and bio hazardous material.
Familiar with using: Vacuum, wide vacuum, mop, wringer, burnisher, ladder, extractor.
Are you continuously seeking to improve your safety, health and environmental standards, while striving for increased productivity and product quality? With METTLER TOLEDO’s solutions for hazardous areas, apparent contrasts turn into one set of standards. Our wide selection of intrinsically safe weighing systems includes balances, indicators and accessories, weighing modules, and weighing platforms of several sizes, shapes and capacities.
Environmental research is perfectly supported with Bruker AXS wavelength dispersive X-ray fluorescence spectrometers (WDXRF) S8 TIGER. Accurate and precise determination of hazardous elements down to the sub-ppm level, reliable identification of elements due to high spectral resolution, high analytical performance even for light elements: The TIGER are perfectly suited for these analytical tasks.
The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine...
Environmental engineers, consultants and geophysicists can use ImpulseRadar GPR for: Hazardous waste disposal and ground contamination studies. Ground water studies – water content / saltwater intrusion. Landfill delineation. Site investigations and assessment. Underground storage tank and drum investigations.
Lime slurry can be easily applied to rough terrain with a fine spray, minimizing waste and dust migration while providing a much safer, cost effective alternative. Flue gas treatment for industrial facilities and hazardous waste incinerators.
• Consulting, development and registration of the Declaration on Formation of Waste (according to the Decree of the Cabinet of Ministers of Ukraine No. 1218 of 03.08.1998 (most recent version dated 30.10.2013);
• Development of the Registry Map of the Object of Formation of Waste (RM OFW) and/or the Registry Map of the Object of Handling and Disposal of Waste (RM OHDW) (according to the Decree of the Cabinet of Ministers of Ukraine No. 1360 of 31.08.1998 (most recent version dated 30.10.2013);
• Inventory of...
SorbEater is a synthetic super-absorbent with the highest oil recovery ratio of ANY known absorbent material resulting in less product required and less product to dispose of.
This provides significant savings on the costly disposal fees associated with hazardous waste.
It is highly effective on fresh water, soil, sand and sea. During development it outperformed the traditional organic peat products in every test.
Ideal for: Any hydrocarbon spills or contamination. It has been used successfully with...
From a regulatory standpoint, the industry is divided into a number of categories: commercial/industrial solid waste incinerators (CISWI), municipal waste combustors (MWC), hospital/medical/infectious waste incinerators (HMIWI), hazardous waste combustors (HWC), sewage sludge incinerators (SSI), and other solid waste incinerators (OSWI). While each sub-category is subject to differing environmental regulations, all can benefit from evaluating their air pollution control requirements.
Combining locally sensed data with other data sources and forecasts, 24/7-supported Contrail® monitors customized alarm rules to notify safety officials of potentially hazardous conditions. Ask us about Contrail® for Dam Safety.
The crushing of hazardous waste such as, for example, sensors, refrigerators, toner cartridges and asbestos is a real challenge for every crushing machine from environmental protection point of view. The Mercodor crushers are best suitable for the crushing of hazardous waste such as asbestos, toner cartridges, refrigerators and sensors. We at Mercodor will be happy to advise you on the subject of crushing of hazardous waste.
Existing hydrocarbon contamination, leaks, and spills can be a time-consuming maintenance problem or a major health, safety, and environmental hazard. Fuel storage tanks, pumping stations, equipment areas, and maintenance bays always need cleaning. Use iSorb as part of an industrial maintenance program, after spill cleanup, and for decontamination of equipment at remediation sites. iSorb’s wide range of viscosities means it can be applied with a simple sprayer or painted onto sloping and vertical surfaces....
The Model 8900 Methane/Non-Methane Analyzer provides direct measurement of Methane and Non-Methane Hydrocarbons. This instrument is utilized in ambient air monitoring networks around metropolitan areas, fence-line monitoring at industrial plants and hazardous waste sites, and in the production of high purity industrial gases. Methane is a naturally occurring gas generated from the decomposition of biological materials and industrial activity. Since Methane is not considered a pollutant it is the Non-Methane...
You could say that all the work our computers do is environmental work, since holding up to any environment is exactly what these handhelds are made to do. No matter the environment, our devices have you covered.
LWT’s dredging systems are used for environmental remediation and cleanup. The automated dredging systems from LWT can handle the toughest contaminated sludge and keep operators safe with radio remote operation. Bio-degradable hydraulic oil used in the dredges eliminates any environmental hazards.