Only show results in Virginia? Ok

environmental instrument Applications

  • Premium

    Hydrological, meteorological and oceanographic monitoring instruments for soil monitoring

    Over the past few decades, soil monitoring has become increasingly important. Environmental factors such as climate change, dwindling water resources, and threatened habitats are driving the need to monitor the environment and implement better policies to protect it. Many natural processes in the environment are driven by or in some ways related to soil hydrological processes. Monitoring soil moisture conditions provides important information for the protection of, and in the understanding of local and regional...

    By Stevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA).

  • Aquatic Respirometry

    Aquatic respiration can be simply yet accurately measured on intact, live organisms using a variety of Strathkelvin Instruments respirometry systems. As with all of our respirometry systems, an aquatic system would comprise of an oxygen meter (either 782 or 928), one or more, high precision, 1302 oxygen electrodes (link) and a respiration chamber to house the organism. The researcher also has a choice of measuring respiration rates via closed or flow-through respirometry. Both closed and flow-through systems...

    By Strathkelvin Instruments Ltd. based in North Lanarkshire, UNITED KINGDOM.

  • Premium

    PTR-TOFMS systems for Flux Measurement of BVOCs

    The ultra-fast analysis capabilities of IONICON PTR-TOF instruments are essential for eddy covariance flux measurements, allowing to study deposition and emission rates of biogenic volatile organic compounds (BVOCs).

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Premium

    Measurement of methane and non-methane hydrocarbons for environmental air quality.

    The Model 8900 Methane/Non-Methane Analyzer provides direct measurement of Methane and Non-Methane Hydrocarbons. This instrument is utilized in ambient air monitoring networks around metropolitan areas, fence-line monitoring at industrial plants and hazardous waste sites, and in the production of high purity industrial gases. Methane is a naturally occurring gas generated from the decomposition of biological materials and industrial activity. Since Methane is not considered a pollutant it is the Non-Methane...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Environmental monitoring solution for fertilizer plants

    Measurement of particulates, SO2, NOX, ammonia, fluorides and greenhouse gas emissions from the fertilizer industry requires careful selection of instruments. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solution for aluminium industry

    Measurement of particulates, SO2, NOx, fluorides and greenhouse gas emissions from the aluminium industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solution for pulp & paper

    Measurement of particulates, SO2, NOX, TRS and greenhouse gas emissions from the Pulp & Paper industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solution for glass manufacturing areas

    Heavy metals, particulates, SO2 & NOx are the main emissions from the glass manufacturing industry and their measurement requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Automated solutions for the environmental cleanup dredging

    Environmental cleanup is an important application for LWT dredges. Mud Cat and Pit Hog dredges are used for chemical and biological cleanup in harbors, rivers and lakes. The patented auger shroud on the Mud Cat dredges minimizes turbidity, and entraps suspended material for suction efficiency. LWT’s automated controls and instrumentation allows the operators to assess real time performance of the dredge technology.

    By Liquid Waste Technology LLC - Mud Cat based in New Richmond, WISCONSIN (USA).

  • Environmental monitoring solution for sulfuric acid plants

    Measurement of SO2, sulfuric acid mist and greenhouse gas emissions from sulfuric acid plants requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Pulsar noise testing equipment for entertainment noise industry

    As of April 2008 the entertainment industry is now expected to comply with ‘The Control of Noise at Work Regulations’. Owners and venue operators are now legally obliged to ensure their workforce is protected from excessive noise levels. To help you understand the key issues, Pulsar Instruments Plc have produced a Free Information Pack detailing the new regulations and offering simple advice and answers to the most commonly asked questions.

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM.

  • Premium

    Low level measurement of aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring.

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Environmental monitoring solution for cement industry

    Measurement of particulates, SO2, NOx, hydrocarbons and greenhouse gas emissions from the cement manufacturing industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Low concentrations monitoring of benzene and aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    With over 15 years of experience in the measurement of volatile organic compounds (VOC), Environment SA announces the VOC72M, a new generation analyzer for the measurement of BTEX compounds by gas chromatography with photo-ionization detector (PID). The VOC72M can handle up to 40 compounds and eight configurations for analysis. This compact and fully automated analyzer with wide voltage range specifications (90-240V) provides equivalent performance to the laboratory chromatographs and is particularly suited to...

    By ENVEA based in Poissy, FRANCE.

  • Premium

    Monitoring Once Through Cooling Water

    Fluorescence-based oil in water monitors from Turner Designs Hydrocarbon Instruments have been used extensively in industrial water processes for more than 20 years. These low maintenance fluorescence monitors have no significant measurement disturbance from water turbidity or naturally occurring organics in the water. Oil in water monitors can help detect and prevent major oil spills that may cause significant environmental damage and regulatory compliance infractions.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Measurement of diacetyl in ambient air to monitor workplace exposure limits.

    The Series 8900 Diacetyl Analyzer provides direct measurement of Diacetyl in ambient air. This instrument is utilized for environmental monitoring and to monitor workplace exposure limits. The Series 8900 Analyzer for Diacetyl employs a photoionization detector (PID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Sound level meters & Noise dosimeters for Construction industry

    Construction can be a industry where high noise levels are common and where both occupational and environmental noise monitoring may be needed. The measurement and monitoring of noise from construction sites can be carried out using a range of different instruments depending upon the time over which the measurements need to be made.

    By Cirrus Research plc based in Hunmanby, UNITED KINGDOM.

  • Noise Monitoring for Transport

    A range of noise measurement instruments, all fully weather protected for reliable long term operation, that are ideal for transport noise measurements. Whether it’s for short term handheld measurements or longer term noise monitoring applications, Cirrus Environmental can offer a solution.

    By Cirrus Environmental based in Peterborough, UNITED KINGDOM.

  • Noise Monitoring

    Airport noise monitoring often requires a combination of short term measurements to gather information along with long term measurements to maintain compliance with agreed noise levels. Cirrus Environmental has a range of noise measurement instruments that have been purpose designed for these tasks along with the NoiseHub software package.

    By Cirrus Environmental based in Peterborough, UNITED KINGDOM.

  • Products for Industrial Weather Station

    Situation: Process control, worker safety, incident response, environmental temperature, wind loads, and precipitation volume are all situations and conditions that may require real-time, local weather instruments. HVAC in large facilities may require “weather” instruments when a wall thermostat just won’t cut it.

    By Dyacon, Inc. based in Logan, UTAH (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you