Only show results available in Virginia? Ok

environmental instrumentation Applications

  • Premium

    Analytical and measuring instruments of environmental

    The environmental field requires robust, high-sensitivity analysis capable of complying with regulations in order to always meet the stringent target values that have been established to assure the safety of the water supply and protect the environment. Moreover, in laboratories where more than 100 samples are processed per day, increasing the throughput and saving energy are issues of concern.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Premium

    Laboratory instruments solutions for environmental industry

    The environmental challenges require internationally accepted standards, in which limits and test methods are defined. Metrohm instruments and applications comply with a lot of international environmental standards. Substances introduced into the environment are distributed among the environmental compartments water, soil (sediment), and air, as well as among the organisms living in them (biosphere). Only if we know the type and quantity of these contaminants can we protect the environment and its inhabitants.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Sediment Pollution Instruments

    Our SediMeter instruments are designed with sediment pollution monitoring in mind. They form part of a system with network and software components designed specifically to be the best possible sediment pollution monitoring system.

    By Lindorm, Inc. based in Medley, FLORIDA (USA).

  • Premium

    Precision moisture analysis instruments for mercury detection for environmental agencies

    Robust analysis for inspection, investigation, remediation. If you are responsible for monitoring a wide range of environments for mercury contamination, it’s not enough that your instrument is accurate. It must also be responsive, reliable, and rugged. Jerome has the answer.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Premium

    Precision moisture analysis instruments for moisture and solids testing for batteries

    Quickly test cathode powders and other advanced materials: In batteries, it has never been more critical to get the best quality product to market. Whether intended for an electric car, a smartphone, or a smoke detector, the quality of any battery will depend on how accurately its moisture content is controlled. Computrac can help. Computrac can quickly provide moisture-specific and total solids content results in a manner that does not depend on operator technique. In addition to instruments based on the loss-on-drying principle, Computrac offers a reagent-free alternative to Karl Fischer titration which is ideal for testing moisture in cathode powders and other advanced materials.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Premium

    Sound instrumentation for environmental noise monitoring

    State of the art noise monitoring systems; Modern noise monitoring systems offer a wide range of advanced features and come with software that can analyze and structure long term measurements data efficiently.  A complete noise monitoring system consists of one or more noise monitoring terminals, a noise server and work stations for presentation, post processing and reporting.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Analysis of Contaminated Plant Leaves Using J200 Tandem LA – LIBS Instrument

    This application note highlights how the J200 Tandem LA – LIBS Instrument from Applied Spectra provides powerful elemental imaging for toxic elements such as Pb and As in plant leaves. Request this application note at http://appliedspectra.com/applications/application-notes.html

    By Applied Spectra, Inc. based in Fremont, CALIFORNIA (USA).

  • Premium

    Analytical instruments for atomic spectroscopy

    Besides Mass Spectrometry, a further variety of analysis techniques are categorized as atomic spectroscopy. Analysis techniques which use inductively coupled plasma (ICP), such as ICP-OES and ICP-MS, are among these. With increasing environmental awareness backed by regulations, an increasingly important use of atomic spectroscopy techniques is in mercury analysis. Achieving a high mass flow control performance, e.g. high repeatability or an excellent turn-down ratio, is a prerequisite to achieve a high analyzer performance. For this, a number of Axetris customers rely on our products while designing such systems.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Environmental Noise Monitoring

    The XL2 Sound Level Meter provides the dedicated solution for monitoring environmental noise in industry and communities. It measures levels and detailed spectral information in parallel and stores the data on an SD card for post-processing and reporting. A linear audio file (wav-file) may be recorded for detailed simultaneous analysis. The type approved class 1 sound level meter offers a flexible handheld instrument with accurate and reliable measurements. Data recording can be scheduled to occur at pre-determined times or automatically triggered when pre-determined levels are exceeded. Applications: Unattended noise monitoring stations (mobile or fixed installations) Annoyance assessment of noise according to ISO 1996-2 Construction noise measurements meeting the Section 61 notice (UK) Urban noise monitoring and noise mapping according to directive 2002/49/EC Verifying boundary noise level emission Advantages Handheld and compact design for field applications and stand-alone oper

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • XRF analysis for environmental applications

    Niton analysers are versatile environmental testing instruments that provide valuable assistance in portable soil testing applications such as brownfield site investigation. With the ability to analyse a wide range of materials, our instruments provide lab-quality soil/sediment chemistry in seconds. Lead, arsenic, cadmium, chromium, and other toxic metals contaminate sites of former industrial and agricultural activity around the world. Whatever the reasons for these occurrences, these pollutants cannot be ignored – particularly as environmental consciousness and regulatory initiatives grow.

    By Niton UK Limited based in Woodmancott, Winchester, UNITED KINGDOM.

  • The Environmental Measurement Laboratory (EML)

    PP “Tehnologia O” has an Environmental Measurement Laboratory (EML) that allows to carry out instrumental measurements of emissions of pollutants into the air. EML have earned certification under services in state control of adherence to standards, norms, rules and state metrological control from SOE “Vinnytsya Center for Standardization, Metrology and Certification” (SOE “Vinnytsyastandartmetrologiya”) (certificate No. ПУ-0070/15 valid till 03 July 2018).

    By PP `Tehnologia O` based in Vinnytsia, UKRAINE.

  • Premium

    Gas monitoring instruments and systems for stack testing according to EPA test method 320

    The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B Performance Specification 15. Gasmet™ Gas Analyzers and Calcmet™ software have been designed to take the requirements of the performance specification into account.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Machine condition monitoring for racing

    Overview

    Grand Prix racing utilizes cutting-edge high performance engines operation at extreme RPMs and temperatures. To keep the very valuable engines operational and competitive requires a team of mechanics paying careful attention to the engine and lubricant condition. To support this, engine condition monitoring based on oil analysis has become a widely practiced technique by Formula One racing teams. 

    Not only do the racing teams themselves take Spectro Scientific instruments to races, but the companies that design, build and test racing engines also are Spectro Scientific customers. We welcome the opportunity to continue to be of service to existing customers and to assist new customers with their oil analysis instrumentation requirements.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

  • Premium

    Measuring aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    The Series 8900 BTEX Analyzer provides direct measurement of Benzene, Toluene, Ethylbenzene, and Xylenes in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites. The Series 8900 BTEX Analyzer employs a photoionization detector (PID) as the sensing element. This detector is specific to volatile organic compounds. The Benzene, Toluene, Ethylbenzene, and Xylene`s in the gas sample are physically separated using proprietary GC columns.

    By MOCON, Inc. - Baseline - AMETEK based in Lyons, COLORADO (USA).

  • Analyse Impurities in many Matrix Gases

    AGC Instruments provide the complete analytical solutions to analyse impurities in many Matrix Gases. With a wide range of successful installations world wide, we can design a system that will meet your exact needs and guarantee top class performance.

    By AGC Instruments Ltd. based in Co. Clare, IRELAND.

  • Environmental monitoring solution for mineral processing

    Measurement of particulates, SO2, NOX, CO, hydrocarbons and greenhouse gas emissions from the mineral process industries requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solution for fertilizer plants

    Measurement of particulates, SO2, NOX, ammonia, fluorides and greenhouse gas emissions from the fertilizer industry requires careful selection of instruments. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solution for glass manufacturing areas

    Heavy metals, particulates, SO2 & NOx are the main emissions from the glass manufacturing industry and their measurement requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solution for pulp & paper

    Measurement of particulates, SO2, NOX, TRS and greenhouse gas emissions from the Pulp & Paper industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you