Only show results available in Virginia? Ok

environmental laboratory Applications

  • The Environmental Measurement Laboratory (EML)

    PP “Tehnologia O” has an Environmental Measurement Laboratory (EML) that allows to carry out instrumental measurements of emissions of pollutants into the air. EML have earned certification under services in state control of adherence to standards, norms, rules and state metrological control from SOE “Vinnytsya Center for Standardization, Metrology and Certification” (SOE “Vinnytsyastandartmetrologiya”) (certificate No. ПУ-0070/15 valid till 03 July 2018).

    By PP `Tehnologia O` based in Vinnytsia, UKRAINE.

  • Laboratory analysis for environmental consulting

    Ormantine USA works closely with consultants, engineers, and other environmental professionals on a daily basis to help find the best solutions to meet individual needs. Ormantine air and soil samplers can be used in: Remediation Performance; Soil Gas Monitoring; Site Assessments; Brownfield Redevelopment; Landfill / Waste Management; Decontamination; Hazardous Material Investigations; Emission Monitoring & Testing; Exposure Assessment; Industrial Hygiene and Risk Management

    By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

  • Premium

    Laboratory information management for environmental laboratories

    Under the Thermo Scientific brand of Thermo Fisher Scientific, Inc. (NYSE:TMO), we help scientists meet the challenges they face in the lab or in the field every day. From routine analysis to new discoveries, our innovations help professionals do the science they need to do, the way they want to do it.

    By Thermo Fisher Scientific, LIMS & Laboratory Software based in Philadelphia, PENNSYLVANIA (USA).

  • Premium

    Chromatography laboratory instrumentation for environmental analysis

    Determining pollutants in environmental and food matrices requires efficient sample preparation and analytics. BUCHI provide a wide selection of solutions for reliable, flexible and safe sample processing procedures in the laboratory work flow for environmental analysis.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Laboratory instruments solutions for environmental industry

    The environmental challenges require internationally accepted standards, in which limits and test methods are defined. Metrohm instruments and applications comply with a lot of international environmental standards. Substances introduced into the environment are distributed among the environmental compartments water, soil (sediment), and air, as well as among the organisms living in them (biosphere). Only if we know the type and quantity of these contaminants can we protect the environment and its inhabitants.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Chromatography laboratory instrumentation for feed (pet food)

    To produce efficiently several feed formulations starting from continuously changing raw materials and premixes, require flexible and accurate analytical and formulation technologies. BUCHI offers dedicated solutions for the entire value chain: from R&D and QC Laboratories to the production lines.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Environmental data management for analytical laboratories

    EQuIS is designed to automate environmental data management and their associated compliance monitoring. It is used by many engineering consulting companies around the world.

    By EarthSoft, Inc based in Concord, MASSACHUSETTS (USA).

  • Laboratory Information Management Systems (LIMS) for Environmental Industry

    Environmental testing laboratories are facing an increasingly challenging marketplace, characterized by low prices and slim margins. Having a comprehensive laboratory information management system (LIMS) to improve productivity has become critical for commercial environmental labs to remain competitive in this difficult business landscape.

    By Khemia Software Inc based in Livonia, MICHIGAN (USA).

  • Laboratory equipments for basic petrophysical measurements using NMR

    Total Porosity BVI FFI CBW Permeability | NMR | GeoSepec2Basic petrophysical parameters (porosity, BVI, FFI, CBW and T2 cutoff) are calculated automatically by the LithoMetrix software installed on every GeoSpec from two measurements – one on a cleaned and saturated core plug, the other on the same plug after it has been centrifuged to irreducible water saturation. Each time, the LithoMetrix software generates a pore size distribution, and from these two pore size distributions automatically calculates the basic parameters. The integrated area under the saturated pore size distribution is a measure of the total porosity and is quantified by comparing to a measurement on a porosity standard supplied with the GeoSpec.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Laboratory Weighing - Hazardous Area (Ex) Weighing

    Are you continuously seeking to improve your safety, health and environmental standards, while striving for increased productivity and product quality? With METTLER TOLEDO’s solutions for hazardous areas, apparent contrasts turn into one set of standards. Our wide selection of intrinsically safe weighing systems includes balances, indicators and accessories, weighing modules, and weighing platforms of several sizes, shapes and capacities.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Air monitoring equipments for laboratory analysis

    Our purpose built environmental laboratory provides accurate and efficient analysis, specialising in the determination of gaseous pollutant concentrations. Other processes can also be performed to meet the specific needs of our customers.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Premium

    Analytical and measuring instruments of environmental industry

    The environmental field requires robust, high-sensitivity analysis capable of complying with regulations in order to always meet the stringent target values that have been established to assure the safety of the water supply and protect the environment. Moreover, in laboratories where more than 100 samples are processed per day, increasing the throughput and saving energy are issues of concern.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Environmental Monitoring

    Environmental monitoring is becoming more important every day in local, national and international policies, showing the environmental awareness demanded by society.

    This fact gives rise to an increase in the amount of legislation that obliges companies to law enforcement. Thus, the necessity of making more pollutants controls means high analysis expenses to the companies, which need to subcontract this service.

    Although applications in this area advance, there is still a clear demand to get new portable and versatile analysis systems for many different application fields such as pollution in environmental or waste waters, monitoring nutrients in agricultural or horticultural water as well as general process control in chemistry industry. Because of the number of enviromental analysis required, there is a need for screening and monitoring measurements of these compounds at contaminated areas.

    Traditional monitoring techniques are typically based on laboratory analysis of field-collected samples that require considerable effort and expense, and the sample may change before analysis. Moreover, the equipment currently available is too large and expensive and it cannot be made portable.Alternatively, microfluidic and electrochemical sensor technologies can contribute to the development of new portable monitoring systems, complementing standard analytical methods for different environmental monitoring applications.In this way, the decentralization and integration of all those typical analyses is the paramount importance in order to reduce cost, simplify the analytical process and make more accessible these technologies to end-users. The development of portable, robust, and accurate Lab-on-a-Chip systems to monitor priority compounds such as contaminants, explosives, chemical warfare agents, inorganic and organic ions is a demand of modern society. Portability allows analyses to be carried out outside of the laboratory, minimizing the risk of contaminating the sample and leading to a faster response time at a lower cost.

    Thus, MicruX solutions and technologies open the gate to develop portable and esay-handly Lab-on-a-Chip devices in order to improve pollutants in-situ analysis in a very economic and efficient way.

    By MicruX Technologies based in Oviedo, SPAIN.

  • Premium

    EDXRF spectrometers for educational industry

    Analytical Chemistry study with Xenemetrix ED-XRF

    Modern research deals with the development of new forms of diagnostic technologies for different purposes, such as solutions for laboratory needs, devices and methods that deliver accurate and reliable results at a very high level of productivity.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Premium

    Analytical and measuring instruments of shimadzu cannabis testing solutions

    Shimadzu`s Cannabis Testing Solutions cover a broad range of applications, from potency testing to pesticide screening. We supply the instruments, methods and experience necessary to get you up and running quickly. Shimadzu scientific instruments have been applied to natural products, food sciences, pharmaceuticals and environmental testing for decades. Whether you are a chromatography expert or a novice, our platforms and training ensure that your laboratory will generate quality results from a wide variety of cannabis samples. Our easy to use platforms save you time and money, maximizing the profits of your laboratory. Shimadzu can help you with your QA/QC testing, peak harvesting analysis and cannabis research.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Laboratory equipments for determination of fat, oil and grease (FOG) for waste water monitoring

    Measurement of Fats, Oils and Grease (FOG) in waste water is a crucial parameter in water quality control and environmental monitoring performed by water suppliers’ laboratories and environmental authorities; the contamination builds up in the sewerage system and will eventually lead to blockages. Typically the waste water is analysed by first passing a large volume through a filter then selectively determining the grease build-up on the dried filter by an analytical method.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • PAHs in Sediment

    Sitelab's laboratory performed a 4 day site investigation testing PAHs in sediment on the West Branch Grand Calumet River in Indiana. Test data was used to fingerprint and map the river bottom contaminated with heavy crude oil.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • environmental testing industry

    KOMEG Technology Industrial is an environmental testing industry leader in the design and manufacturing of climatic test chambers, thermal shock test chambers, walk-in chambers, burn-in rooms, aging test chambers, drying ovens, salt spray testers and medical laboratory equipment etc. for the military and industrial market place.

    By KOMEG Technology Industrial Co.,Ltd. based in Dongguan, CHINA.

  • Continuous Emissions Monitoring Calibration Systems (CEMCS)

    The Environics Series Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. Our systems are custom built, computerized, mass flow controller based gas calibration systems which allow you to dilute a single high concentration cylinder of span gas to low levels for the calibration of gas analyzers.

    By Environics, Inc. based in Tolland, CONNECTICUT (USA).

  • Core Analysis for unconventional reservoirs

    Low field Nuclear Magnetic Resonance (NMR) is routinely used in core analysis laboratories to examine the T2 relaxation time distribution of fluids in core plugs. These distributions can be interpreted to give information on: pore size distributions; permeability; total and effective porosity; free fluid index and bound water volumes. The partnership between Oxford Instruments and Green Imaging Technologies allows us to integrate hardware and software to enable any core analysis laboratory to generate these petrophysical results without the need for in-depth knowledge of NMR.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you