Only show results available in Virginia? Ok

environmental measurement instrument Applications

  • Premium

    Analytical and measuring instruments of environmental industry

    The environmental field requires robust, high-sensitivity analysis capable of complying with regulations in order to always meet the stringent target values that have been established to assure the safety of the water supply and protect the environment. Moreover, in laboratories where more than 100 samples are processed per day, increasing the throughput and saving energy are issues of concern.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Premium

    Instruments and analyzers for DHI measurements

    Diffuse irradiance measurements: Diffuse Horizontal Irradiance measurements are performed with a thermopile sensor called Pyranometer mounted on a Sun tracker or shading ring.  When the pyranometer is installed on an automatic sun tracker, the diffuse radiation can be measured in two different ways. Measuring Diffuse irradiance requires an accurate pyranometer with low offset properties. Duirng clear sky conditions the DHI irradiance (W/m2) is less than 20% of the total irradiance. Zero offsets lead to...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Temperature measurement and control devices for industrial controls & instrumentation industry

    TTEC completes your Controls Package with our full line of Thermocouples, RTD`s & Accessories. Standard or Custom designs to complement your product offering. TTEC can mfg any Thermocouple or RTD that you need in small or large quantity Thermocouples: All Types (-330 to 4200F) RTD`s: Platinum, Nickel, Copper (-330 to 1200F) Wire: Thermocouple or Extension Grade, RTD Extension Wire. Transmitters: In head or Din-Rail (programmable or factory ranged, HART) Digital Indicators: Panel Meters, Local Displays,...

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

  • Premium

    Instruments and analyzers for DNI measurements with a pyrheliometer

    Solar Direct Normal Irradiance (DNI) represents the direct solar component and contains about 80% of the total solar energy budget on earth. Outside the atmosphere (AM0) the solar irradiance is considdered as a constant (1367 W/m2) that slightly fluctuates with a 11 year cycle. The DNI at the earth surface is highly variable due to the atmospheric conditions (clouds, aerosols, water vapor and molecules).

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Instruments and analyzers for measuring spectral irradiance

    Spectral irradiance is the irradiance of a surface per unit frequency or wavelength. spectral irradiance of a wavelength spectrum is measured per watts per square metre per nanometre (W·m−2·nm−1). Spectroradiometers are devices designed to measure the spectral power distribution of a source. From the spectral power distribution, the radiometric, photometric, and colorimetric quantities of light can be determined in order to measure, characterize, and...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Instruments and analyzers for DNI measurements at CPV sites

    Concentrating Photovoltaics (CPV) is driven by only direct solar radiation. To quantify the energy efficiency of a CPV system the total DNI and direct spectral solar irradiance, called spectral DNI, can be measured. Solar sensors are crucial during the phase of development and operation. Even at high sunny places, the composition and variability of the atmosphere strongly affects the solar spectral distribution and will impact on the energy yield and the decision on which cell type to use. The...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • The Environmental Measurement Laboratory (EML)

    PP “Tehnologia O” has an Environmental Measurement Laboratory (EML) that allows to carry out instrumental measurements of emissions of pollutants into the air. EML have earned certification under services in state control of adherence to standards, norms, rules and state metrological control from SOE “Vinnytsya Center for Standardization, Metrology and Certification” (SOE “Vinnytsyastandartmetrologiya”) (certificate No. ПУ-0070/15 valid till 03 July 2018).

    By PP `Tehnologia O` based in Vinnytsia, UKRAINE.

  • Instrumentation for Scientific Research

    Accurate and traceable measurements of atmospheric gases are essential for understanding our changing environment, and the formulation, implementation, and evaluation of climate change mitigation strategies in response to rising concentrations of greenhouse gases and resulting global warming. In addition to concentration measurements for background measurements, and source monitoring and quantification, isotopic measurements allow the attribution of emissions sources, as well as tracing the natural cycles of...

    By Mirico based in Chilton, UNITED KINGDOM.

  • Premium

    Process instrumentation and analytics solutions for environmental monitoring industry

    From monitoring impurities in vents, stacks, air or water to point source or area monitoring, automatic and on-line measurement is an important tool. This type of measurement will detect, quantify and assist in reducing emissions. Siemens analytical products are utilized for many of these measurements.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Premium

    Instruments and analyzers for measurement of engergy losses in building

    The construction building wall makes the most significant contribution to the reduction of building energy consumption. The total thermal losses of building constructions strongly depends on the environmental conditions (Location) and building construction (Material). On site measurements are possible with EKO thin film heat flow sensors which can be integrated with building walls. Evaluation of heat flow and thermal losses is inevitable during building design and engineering of energy-efficient floor heating...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Measuring aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    The Series 8900 BTEX Analyzer provides direct measurement of Benzene, Toluene, Ethylbenzene, and Xylenes in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites. The Series 8900 BTEX Analyzer employs a photoionization detector (PID) as the sensing element. This detector is specific to volatile organic compounds. The Benzene, Toluene, Ethylbenzene, and Xylene`s in the gas sample are physically separated using proprietary GC columns.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Instruments and analyzers for accurate solar radiation measurements

    Conducting reliable and accurate solar radiation measurements requires some knowledge and attention: think of environmental influences (wind, rain/snow, soling), re-calibration (bi-annually), not to mention data processing, spectral effects, etc. Essentially, accurate broadband solar radiation measurements are obtained using two components: a suitable set of pyranometers, including an optional pyrheliometer (DNI sensor) with sun tracker, and an adequate data logger.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Sound instrumentation for environmental noise monitoring

    State of the art noise monitoring systems; Modern noise monitoring systems offer a wide range of advanced features and come with software that can analyze and structure long term measurements data efficiently. A complete noise monitoring system consists of one or more noise monitoring terminals, a noise server and work stations for presentation, post processing and reporting.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Instruments and analyzers for spectral irradiance portable solutions

    Reflection and transmission measurements on materials, vegetation, water or atmosphere give valuable information about biological, physical and chemical processes. Processes driven by solar radiation, in particular bands of the spectrum through the so called action spectra, can be analysed or quantified with a sensor senitive in the particular spectral band. The MS-720 portable spectroradiometer gives total freedom to be used in different applications and range of the spectrum between 350 - 1050 nm.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Analytical and measuring instruments of shimadzu cannabis testing solutions

    Shimadzu`s Cannabis Testing Solutions cover a broad range of applications, from potency testing to pesticide screening. We supply the instruments, methods and experience necessary to get you up and running quickly. Shimadzu scientific instruments have been applied to natural products, food sciences, pharmaceuticals and environmental testing for decades. Whether you are a chromatography expert or a novice, our platforms and training ensure that your laboratory will generate quality results from a wide variety...

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Premium

    PTR-TOFMS systems for Flux Measurement of BVOCs

    The ultra-fast analysis capabilities of IONICON PTR-TOF instruments are essential for eddy covariance flux measurements, allowing to study deposition and emission rates of biogenic volatile organic compounds (BVOCs).

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Premium

    Measurement of methane and non-methane hydrocarbons for environmental air quality.

    The Model 8900 Methane/Non-Methane Analyzer provides direct measurement of Methane and Non-Methane Hydrocarbons. This instrument is utilized in ambient air monitoring networks around metropolitan areas, fence-line monitoring at industrial plants and hazardous waste sites, and in the production of high purity industrial gases. Methane is a naturally occurring gas generated from the decomposition of biological materials and industrial activity. Since Methane is not considered a pollutant it is the Non-Methane...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Environmental Noise Monitoring

    The XL2 Sound Level Meter provides the dedicated solution for monitoring environmental noise in industry and communities. It measures levels and detailed spectral information in parallel and stores the data on an SD card for post-processing and reporting. A linear audio file (wav-file) may be recorded for detailed simultaneous analysis. The type approved class 1 sound level meter offers a flexible handheld instrument with accurate and reliable measurements. Data recording can be scheduled to occur at pre-determine...

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • Premium

    Low level measurement of aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring.

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Data loggers and data acquisition monitoring solutions for the environmental sector

    Selection of environmental data loggers to measure, record and analyze historical data. Programmable, mixed-input models with single and multi-channel options. Remotely access data for real-time information. Environmental data loggers capture and record environmental data to satisfy a wide range of needs. These environmental monitoring solutions vary from simple 1- and 2-channel data loggers that monitor temperature and humidity to intelligent multi-channel instruments that can be used with weather stations...

    By CAS DataLoggers based in Chesterland, OHIO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you