Only show results in Virginia? Ok

environmental monitoring Applications

  • Premium

    Hydrological monitoring

    By Stevens Water Monitoring Systems, Inc. based in Portland, OREGON (USA).

  • Environmental Monitoring

    Environmental monitoring is becoming more important every day in local, national and international policies, showing the environmental awareness demanded by society.

    This fact gives rise to an increase in the amount of legislation that obliges companies to law enforcement. Thus, the necessity of making more pollutants controls means high analysis expenses to the companies, which need to subcontract this service.

    Although applications in this area advance, there is still a clear demand to get new portable and versatile analysis systems for many different application fields such as pollution in environmental or waste waters, monitoring nutrients in agricultural or horticultural water as well as general process control in chemistry industry. Because of the number of enviromental analysis required, there is a need for screening and monitoring measurements of these compounds at contaminated areas.

    Traditional monitoring techniques are typically based on laboratory analysis of field-collected samples that require considerable effort and expense, and the sample may change before analysis. Moreover, the equipment currently available is too large and expensive and it cannot be made portable.Alternatively, microfluidic and electrochemical sensor technologies can contribute to the development of new portable monitoring systems, complementing standard analytical methods for different environmental monitoring applications.In this way, the decentralization and integration of all those typical analyses is the paramount importance in order to reduce cost, simplify the analytical process and make more accessible these technologies to end-users. The development of portable, robust, and accurate Lab-on-a-Chip systems to monitor priority compounds such as contaminants, explosives, chemical warfare agents, inorganic and organic ions is a demand of modern society. Portability allows analyses to be carried out outside of the laboratory, minimizing the risk of contaminating the sample and leading to a faster response time at a lower cost.

    Thus, MicruX solutions and technologies open the gate to develop portable and esay-handly Lab-on-a-Chip devices in order to improve pollutants in-situ analysis in a very economic and efficient way.

    By MicruX Technologies based in Oviedo, SPAIN.

  • Premium

    Meteorological systems for environmental monitoring

    Climatronics has supplied meteorological systems for environmental monitoring and regulatory compliance for over 35 years. Our accurate, responsive, yet rugged sensors, coupled with high-power data loggers, provide users with the ability to make measurements on multi-level towers, multiple tower networks, and single sites, which comply with EPA, NRC, and international regulatory requirements.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).


    UIZ designed and developed Environmental Monitoring and Interactive Visualization Application.

    By UIZ Umwelt und Informationstechnologie Zentrum based in Berlin, GERMANY.

  • Environmental protection

    Laser Gas measurements Flue gas emissions, HCl, HF, CO, CO2, O2, NH3, NO, NO2


  • Chromatography systems for environmental monitoring

    With the growth of contamination generated from agricultural and industrial production, it causes a threat to the enviroment including drinking water, atmosphere and soil. The chemists have always seeked out the effective analytical methods to detect and identify chemical contaminants. Dikma provides innovative products and application solutions according to government regulations and industry standards, for air and water quality monitoring, gas detection.

    By Dikma Technologies Inc. based in Lake Forest, CALIFORNIA (USA).

  • Environmental Noise Monitoring

    The XL2 Sound Level Meter provides the dedicated solution for monitoring environmental noise in industry and communities. It measures levels and detailed spectral information in parallel and stores the data on an SD card for post-processing and reporting. A linear audio file (wav-file) may be recorded for detailed simultaneous analysis. The type approved class 1 sound level meter offers a flexible handheld instrument with accurate and reliable measurements. Data recording can be scheduled to occur at pre-determined times or automatically triggered when pre-determined levels are exceeded. Applications: Unattended noise monitoring stations (mobile or fixed installations) Annoyance assessment of noise according to ISO 1996-2 Construction noise measurements meeting the Section 61 notice (UK) Urban noise monitoring and noise mapping according to directive 2002/49/EC Verifying boundary noise level emission Advantages Handheld and compact design for field applications and stand-alone oper

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • Radioactivity monitoring for environmental monitoring agencies

    TrisKem International produces and commercialises chemical products and the associated accessories for radiation protection and monitoring of radioactivity levels in the environment.     

    By TrisKem International SAS based in Bruz, FRANCE.

  • Temperature monitoring in a rotary kiln

    Taking measurements on rotating equipment, such as a kiln or rotary table, usually requires a complex and expensive system of cabling. Even taking precautions and using specialized equipment doesn’t eliminate cable tangles and breaks. The SureCross Wireless Network eliminates complexities associated with data acquisition from rotating and moving machinery such as a rotating kilns in cement or composting industry. Crucial temperature data is acquired using a thermocouple and transmitted from the FlexPowered SureCross Nodes to a remote Gateway in the plant’s control center.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Monitoring Sewage Flow

    Monitoring Sewage Flow is a critical tool for local governments, for water and waste-water utilities and for industrial plants. Sewage monitoring can prevent environmental disasters such as sewage overflow within populated neighborhoods or excessive waste flow into local lakes, rivers or sea. Sewage monitoring is also an important tool for short term and long term planning of the sewers infrastructure. Short term refers to just-in-time and cost effective maintenance. For example, sending the technical team to the correct manhole at the correct time to clean and eliminate obstructions. Long term planning refers to designing the correct pipe diameters and correct slopes to contain sewage from new new buildings and plants. Sewage monitoring is a tool for billing plants who produce sewage above their water intake and a tool for plants which utilize water to request lower utility bills. Solid Applied Technologies provides a complete and tested solution for Sewer Monitoring.

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • River Level Monitoring -

    SUMMARY Fielded water level measurement stations, based on GaugerGSM sensor, report real time stream levels and flow. Stations are located across a stream-rich region of the upper Galilee feeding the Jordan river in the northern part of Israel. The region is a popular tourist destination due to its biblical origins, rich flora and fauna. Field data is available over the Internet to authorized engineers, site supervisors and Government officials. remote monitoring station - close up THE NEED The water basin in the Upper Galilee maintains a delicate balance between recharges, net precipitation, domestic and irrigation consumption, and water tourism (canoeing). Local and state officials are tasked to study the tradeoffs, manage risks and take actions to keep the balance. Monitoring stations are essential for data collection. remote monitoring station - overall

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • Premium

    Online Toxicity Monitoring

    By microLAN On-line Biomonitoring Systems based in Waalwijk, NETHERLANDS.

  • Premium

    Radiation Monitoring for Environmental Monitoring

    The environment is one of today’s foremost concerns, and its preservation is among the biggest challenges we need to meet in coming years. Saphymo offers a series of global solutions designed to detect the impact of a nuclear accident on the environment and local populations, and hence facilitate crisis management. Our environmental monitoring networks and mobile devices continuously monitor artificial and natural radiation levels in air, water and soil, and provide data transmission to a central supervision station. These solutions are internationally acclaimed for their autonomy, reliability, and ability to resist harsh environmental conditions.

    By Saphymo based in Montigny Le Bretonneux, FRANCE.

  • Premium

    Environmental radiation monitoring

    Every day, wherever we go, we are exposed to minute amounts of environmental radiation.* This environmental radiation is emitted continuously, day and night, from various objects and substances in the natural world and our living environment.

    Most environmental radiation consists of three types: alpha rays (α), beta rays (β) and gamma rays (γ).  HORIBA`s PA-1000 `Radi` environmental radiation monitor makes it easy for non-specialists to measure even minute levels of gamma rays.

    * Environmental radiation, also known as natural radiation, includes radiation emitted from space, soil, stones, the ground and the air, as well as from manmade objects such as concrete and buildings

    By HORIBA Europe GmbH based in Leichlingen, GERMANY.

  • Premium

    Tunnel monitoring

    Car tunnels need ventilation in order to keep air pollution below the limits. When the pollution levels reaches a setpoint, the fans must be started and kept running until the pollution levels decreases.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Fence-line Monitoring

    The OPSIS open-path monitoring system is an excellent tool for monitoring the air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan software.

    By Opsis AB based in Furulund, SWEDEN.

  • Biodiversity Monitoring

    In many sectors with large impacts on land such as mining, oil & gas, and construction, it is common for sustainability leaders to assert that they will have ‘no net loss’, or a ‘net positive impact’ on biodiversity. These promises regarding organizational biodiversity performance are proving extremely difficult to test. Our Ecosystem and the Normative Biodiversity Metric give sustainability leaders a chance to measure, analyze and communicate the success of these promises.

    By Ecometrica based in London, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you