Only show results available in Virginia? Ok

environmental monitoring equipment Applications

  • Pulsar noise testing equipment for environmental noise monitoring

    Environmental noise is a major issue in most countries, especially in areas of high population, and the sources of noise and their adverse effects on our well-being are varied. In terms of assessing the impact of these issues, we need to be able to make suitable noise measurements, or in some cases monitor the noise levels for longer periods.

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM.

  • Radiation monitoring

    Radiation monitoring equipment Radon gas equipment Area monitor Environmental monitoring stations

    By Pacific-Tec Scientific Pte Ltd based in Singapore, SINGAPORE.

  • Environmental Monitoring

    Environmental monitoring is becoming more important every day in local, national and international policies, showing the environmental awareness demanded by society.

    This fact gives rise to an increase in the amount of legislation that obliges companies to law enforcement. Thus, the necessity of making more pollutants controls means high analysis expenses to the companies, which need to subcontract this service.

    Although applications in this area advance, there is still a clear demand to get new portable and versatile analysis systems for many different application fields such as pollution in environmental or waste waters, monitoring nutrients in agricultural or horticultural water as well as general process control in chemistry industry. Because of the number of enviromental analysis required, there is a need for screening and monitoring measurements of these compounds at contaminated areas.

    Traditional monitoring techniques are typically based on laboratory analysis of field-collected samples that require considerable effort and expense, and the sample may change before analysis. Moreover, the equipment currently available is too large and expensive and it cannot be made portable.Alternatively, microfluidic and electrochemical sensor technologies can contribute to the development of new portable monitoring systems, complementing standard analytical methods for different environmental monitoring applications.In this way, the decentralization and integration of all those typical analyses is the paramount importance in order to reduce cost, simplify the analytical process and make more accessible these technologies to end-users. The development of portable, robust, and accurate Lab-on-a-Chip systems to monitor priority compounds such as contaminants, explosives, chemical warfare agents, inorganic and organic ions is a demand of modern society. Portability allows analyses to be carried out outside of the laboratory, minimizing the risk of contaminating the sample and leading to a faster response time at a lower cost.

    Thus, MicruX solutions and technologies open the gate to develop portable and esay-handly Lab-on-a-Chip devices in order to improve pollutants in-situ analysis in a very economic and efficient way.

    By MicruX Technologies based in Oviedo, SPAIN.

  • Temperature monitoring in a rotary kiln

    Taking measurements on rotating equipment, such as a kiln or rotary table, usually requires a complex and expensive system of cabling. Even taking precautions and using specialized equipment doesn’t eliminate cable tangles and breaks. The SureCross Wireless Network eliminates complexities associated with data acquisition from rotating and moving machinery such as a rotating kilns in cement or composting industry. Crucial temperature data is acquired using a thermocouple and transmitted from the FlexPowered SureCross Nodes to a remote Gateway in the plant’s control center.

    By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).

  • Premium

    Sampling and drilling equipments for the environmental industry

    Environmental consultants, engineering firms, and researchers in the environmental industry use AMS products for a variety of sampling, testing, and monitoring needs.

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

  • Premium

    Surface water quality testing for the environmental monitoring industry

    Aquaread stock a wide range of testing equipment designed to track a number of parameters and water quality testing measures. These can be used in many different bodies of water, including rivers, lakes, streams and seawater. The advantages of tracking water quality and testing for numerous parameters means that it is easier to notice changes which could cause damage to aquatic ecosystems. Early detection not only helps with monitoring water quality, but also helps to put mitigating measures in place. We have a wide range of parameters, although the most popular of these allow for surface water testing, pH, temperature, electrical conductivity and measuring levels of dissolved oxygen. These are standard measurements included in most standard Aquaprobes, although if you require more specific parameter testing then there are a number of additional parameters which can be added onto to the base Aquaprobe to compensate this.

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Fire Danger Rating / Forecasting

    For various reasons, including the changing global climate, wildfires are getting bigger, more destructive and more expensive. Effective, consistent and reliable detection of climate parameters is the key to preventing wildfires and managing the impact they have. Our equipment resides for decades in solitary confinement generally in very remote areas (often at the tops of mountains or deep within a national forest), constantly measuring and recording weather data. Once per hour, this data is transmitted back to government agencies who will analyze and use it to make decisions critical to the safety of the public. In the United States, FTS works closely with the National Interagency Fire Center (NIFC). The center’s mission is the complex interagency coordination of wildland firefighting resources for the country. One of the resources is the network of remote automated weather stations (RAWS), the vast majority of which are supplied by FTS.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Fire Weather Monitoring

    FTS is the world leader in environmental monitoring solutions for fire weather. FTS stations are in use by every one of the top 50 government forest management agencies in every corner of the United States and Canada. No one else dedicates as much of its research and development efforts to the needs of fire weather professionals. FTS portable and fixed-site weather stations set the standard for reliability and simplicity of operation, maintenance, and installation. As a manufacturer, we design and engineer the leading datalogger that is approved and fully supported by the NIFC Remote Sensing Fire Weather Support Unit (RSFWSU). Our G5 GOES / Meteosat transmitter is recognized as the most reliable GOES technology available, and is licensed for use by other environmental monitoring equipment manufacturers.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Environmental monitoring solutions for the industrial sites industry

    Industrial facilities, Superfund sites and other remediation sites. QED Environmental Systems has been a leading manufacturer of air-powered environmental pumps, control equipment and supplies for groundwater remediation, groundwater sampling, landfill leachate and methane condensate pumping since 1982. QED also manufactures high-performance, cost-effective air strippers for groundwater and process water, plus solar-powered, wireless remote data collection systems. Customer service and support includes the industry`s largest in-house engineering staff and a worldwide network of trained, equipped local representatives.

    By QED Environmental Systems, Inc. - A Graco Company based in Dexter, MICHIGAN (USA).

  • Air monitoring equipments for laboratory analysis

    Our purpose built environmental laboratory provides accurate and efficient analysis, specialising in the determination of gaseous pollutant concentrations. Other processes can also be performed to meet the specific needs of our customers.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Premium

    Machine condition monitoring for municipalities


    Cities and towns are often responsible for maintaining critical assets such as water and wastewater treatment facilities and power generation plants. Oil analysis on this critical equipment as part of a robust maintenance program is a very cost effective way of failure avoidance. Additionally, greater emphasis on environmental conservation and a focus on delivering critical services while operating under reduced budgets leads municipalities to activate these programs. Spectro oil analysis solutions are used by many municipalities to monitor treatment plant gearboxes and backup diesel generators, and avoid costly lubrication mixups.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Machine condition monitoring for off-highway heavy equipment


    Machine Condition Monitoring based on oil analysis has become an important, if not mandatory, maintenance practice for the construction, mining, and agricultural industries. Equipment in these industries are frequently exposed to severe environmental and working conditions. An effective oil analysis program will keep important assets in operation by reducing unexpected failures and costly unscheduled downtime.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Thin-film Measurement Technology for Appliance Industry

    Measurement and control is an essential element in the success of products in the consumer appliance industry. Precise temperature measurement in cooking equipment along with flow control in cleaning equipment are crucial to the proper functioning of different appliances. IST’s thin film platinum temperature sensors are ideal for the long term precise measurements required by many of these devices. They are also capable of measuring extremely high temperatures at which some appliances operate. IST’s flow sensors, with the ability to measure pressure differential and flow direction, are more than capable of meeting the needs of products in the appliance industry.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Air sampling & monitoring systems for environment industry

    Researchers and Engineers utilize HI-Q air sampling equipment and systems for analyzing and investigating environments around the world.  Data collected by HI-Q air sampling systems have provided critical information in the identification and prevention of pollution. HI-Q offers a line of high volume (TSP-Type) air sampling systems for data collection in perimeter monitoring & industrial emissions monitoring applications.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

  • Airport Environmental Monitoring

    Water pollution from airport run-off is increasingly coming under public and government scrutiny. As environmental regulations tighten, the ability to monitor for aviation fuel contamination from runway run-off has become essential.

    Monitoring sites at airports can be extremely challenging often with no power or telephone lines available and with limited access for maintenance. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited for this application. Installed at various locations around the airport, deployed with it’s own integrated anti-biofouling system, utilising the GSM network, the monitoring sites send data to a secure ftp site, where any internet enabled device can access the data. In this way the systems act as any early warning system allowing any hydrocarbon discharge to be detected in real-time.

    Optional environmental monitoring features include remote control to allow the user to turn equipment on and off, change the sample rate and detection range. There is also a facility to allow SMS text and email alarm notifications triggered by user-defined set-points together with customised web pages, data displays and automated data downloads via an ftp server.

    Airport runoff can contain high concentrations of various pollutants, in particular polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), the environmental levels of which have to be monitored. An understanding of the magnitude of contamination due to airport runoff water is important for the effective management of airport infrastructure. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited to the airport environment.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Premium

    Machine condition monitoring for lubricant & additive manufacturers


    Many large oil companies are Spectro Scientific customers because they employ oil analysis not only to monitor their own equipment in refineries, tankers, and pipelines, but they monitor their own blended lubricant products and also frequently provide oil analysis services to customers who buy their lubricants. Many industrial and transportation companies receive oil analysis services from their lubricant supplier.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Analytical and measuring instruments of shimadzu cannabis testing solutions

    Shimadzu`s Cannabis Testing Solutions cover a broad range of applications, from potency testing to pesticide screening. We supply the instruments, methods and experience necessary to get you up and running quickly. Shimadzu scientific instruments have been applied to natural products, food sciences, pharmaceuticals and environmental testing for decades. Whether you are a chromatography expert or a novice, our platforms and training ensure that your laboratory will generate quality results from a wide variety of cannabis samples. Our easy to use platforms save you time and money, maximizing the profits of your laboratory. Shimadzu can help you with your QA/QC testing, peak harvesting analysis and cannabis research.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Environmental monitoring solutions for the landfill industry

    Since 1982, QED has been the leading supplier of air-powered pumps for groundwater sampling, leachate and condensate management, providing expertise in groundwater monitoring, leachate level control and methane recovery systems and equipment to landfills ranging from small municipal facilities to large industrial and military sites, including the leading national and international solid waste management companies.

    By QED Environmental Systems, Inc. - A Graco Company based in Dexter, MICHIGAN (USA).

  • Environmental monitoring solutions for the oil refineries & petrochemical industry

    Air-powered submersible pumps, equipment for free product recovery and groundwater remediation, groundwater sampling. QED Environmental Systems has been a leading manufacturer of air-powered environmental pumps, control equipment and supplies for groundwater remediation, groundwater sampling, landfill leachate and methane condensate pumping since 1982. QED also manufactures high-performance, cost-effective air strippers for groundwater and process water, plus solar-powered, wireless remote data collection systems. Customer service and support includes the industry`s largest in-house engineering staff and a worldwide network of trained, equipped local representatives.

    By QED Environmental Systems, Inc. - A Graco Company based in Dexter, MICHIGAN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you