environmental monitoring industry Applications in Australasia

  • Premium

    Water monitoring for the environmental industry

    By General Oceanics Inc. Distributor in Victoria, AUSTRALIA.

  • Fugitive emissions monitoring on industrial sites

    The real-time monitoring of odorous gases or more classical pollutants emitted by industrial sites (wastewater treatment plants, refineries, landfills, etc.) appears nowadays as a requirement, in order to optimize the site process and operations, or communicate towards the neighborhoods and local public bodies. While emissions can be measured directly at the source (in the stack, exhaust, etc.), ambient air measurement all around the sites provides a better accuracy and anticipate pollution episodes. This is why Cairpol developed around its Cairsens sensors a concept of smart and autonomous stations: Cairnet. Without any maintenance nor calibration, Cairnet is a completely autonomous system energy-wised, with user friendly and efficient interface, accessible from any internet-connected device.

    By Cairpol Environnement S.A Distributor in AUSTRALIA.

  • Environmental monitoring solution for mining industry

    Control of fugitive dust in the mining industry and in particular open cut operations is of great concern to the local community, environmental protection authorities and of course the mine operators. Dust emissions can cause both nuisance effects as well as health effects and so mines typically employ multiple dust suppression activities to minimise their environmental impact. Many of these activities can be expensive to operate and depending on environmental conditions, at the time, may not actually be effective or necessary.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solution for aluminium industry

    Measurement of particulates, SO2, NOx, fluorides and greenhouse gas emissions from the aluminium industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Thin-film Measurement Technology for Appliance Industry

    Measurement and control is an essential element in the success of products in the consumer appliance industry. Precise temperature measurement in cooking equipment along with flow control in cleaning equipment are crucial to the proper functioning of different appliances. IST’s thin film platinum temperature sensors are ideal for the long term precise measurements required by many of these devices. They are also capable of measuring extremely high temperatures at which some appliances operate. IST’s flow sensors, with the ability to measure pressure differential and flow direction, are more than capable of meeting the needs of products in the appliance industry.

    By Innovative Sensor Technology (IST) Distributor in Blackburn, AUSTRALIA.

  • Environmental monitoring solution for cement industry

    Measurement of particulates, SO2, NOx, hydrocarbons and greenhouse gas emissions from the cement manufacturing industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solution for fertilizer plants

    Measurement of particulates, SO2, NOX, ammonia, fluorides and greenhouse gas emissions from the fertilizer industry requires careful selection of instruments. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Sampling and drilling equipments for the environmental industry

    Environmental consultants, engineering firms, and researchers in the environmental industry use AMS products for a variety of sampling, testing, and monitoring needs.

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) Distributor in Nunawading, AUSTRALIA.

  • Premium

    Thin-film Measurement Technology for Building Automation Industry

    The Heating Ventilation and Air-condition (HVAC) market in the Building Automation industry focuses on controlling atmospheric conditions to make them more suitable. Among the conditions controlled by these systems are temperature and humidity. aIST’s thin film platinum and nickel temperature sensors are ideal for heat meter monitoring and control applications in HVAC because of their high resolution and long term accuracy. Additionally, IST’s thin film capacitive humidity sensors are ideal for controlling the relative humidity of an environment due to their rapid response times and accuracy over time. Thermal mass flow sensors also have applications in the HVAC industry as an indicator of duct airflow

    By Innovative Sensor Technology (IST) Distributor in Blackburn, AUSTRALIA.

  • Premium

    Sound level meters & Noise dosimeters for Environmental noise monitoring industry

    Environmental Noise is one of the fastest growing areas of noise monitoring, mapping and control. The EU has introduced a number of Directives aimed at increasing the level of information about Environmental Noise across the EU. In 1996, data from the EU Green Paper on Future Noise Policy estimated that around 20% of the EU`s population, or close to 80 million people, suffer from noise levels that experts consider to be unacceptable. Most of these people become annoyed and suffer from sleep deprivation, which experts fear will lead to adverse health effects. An additional 170 million citizens are now living in so-called "grey areas" where the noise levels cause serious annoyance during the daytime.

    By Cirrus Research plc Distributor in NEW ZEALAND.

  • Premium

    Measuring aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    The Series 8900 BTEX Analyzer provides direct measurement of Benzene, Toluene, Ethylbenzene, and Xylenes in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites. The Series 8900 BTEX Analyzer employs a photoionization detector (PID) as the sensing element. This detector is specific to volatile organic compounds. The Benzene, Toluene, Ethylbenzene, and Xylene`s in the gas sample are physically separated using proprietary GC columns.

    By AMETEK MOCON - Baseline Distributor in AUSTRALIA.

  • Premium

    Ambient air quality monitoring solutions for fence-line monitoring

    The OPSIS open-path monitoring system is an excellent tool for monitoring the air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan software.

    By Opsis AB Distributor in Knoxfield, AUSTRALIA.

  • Noise monitoring solutions for environmental noise and vibration

    Environmental noise is unwanted sound and vibration coming from a plethora of sources, among them industrial plants, road and rail traffic, construction work, and aircraft. Add to these sports events, shooting ranges, leisure parks, etc, and you have noise from many different sources, each with different characteristics and posing specific problems for the professionals who have to assess them. The way the problems are dealt with differs immensely from country to country and is very much dependent on culture, economy and politics. We offer solutions to cover all demands from level checks to in-depth analysis, from measurement or prediction, to post-processing and reporting.

    By Brüel & Kjær Sound & Vibration Measurement A/S Office in North Ryde, PO Box 349, AUSTRALIA.

  • Premium

    Machine condition monitoring for lubricant & additive manufacturers

    Overview

    Many large oil companies are Spectro Scientific customers because they employ oil analysis not only to monitor their own equipment in refineries, tankers, and pipelines, but they monitor their own blended lubricant products and also frequently provide oil analysis services to customers who buy their lubricants. Many industrial and transportation companies receive oil analysis services from their lubricant supplier.

    By Spectro Scientific Distributor in Tuggerah, AUSTRALIA.

  • Premium

    Monitoring solutions for the marine industry

    While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex VI aims to reduce emissions from ships through international regulations, which hopefully will discourage states from enacting unilateral regulations problematic to the shipping industry.

    By Codel International Ltd Distributor in Lane Cove West, AUSTRALIA.

  • Environmental monitoring solution for mineral processing

    Measurement of particulates, SO2, NOX, CO, hydrocarbons and greenhouse gas emissions from the mineral process industries requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Machine condition monitoring for rail fleet

    Overview

    Machine condition monitoring based on oil analysis has become an important, if not mandatory, maintenance practice by the transportation industry. An effective oil analysis program will keep important transportation industry assets such as engines in gearboxes in trains, buses and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled downtime.

    By Spectro Scientific Distributor in Tuggerah, AUSTRALIA.

  • Premium

    Water monitoring technology for urban hydrology

    Urban Hydrology deals with the specific aspects of the hydrological cycle in urban and industrial settings. This includes all natural water flows as well as the consideration of precipitation, storm water, groundwater, rivers, and lakes, but also the infrastructure and systems for water supply and sanitation in a city.

    By The OTT Hydromet Group Distributor in AUSTRALIA.

  • Environmental monitoring solution for glass manufacturing areas

    Heavy metals, particulates, SO2 & NOx are the main emissions from the glass manufacturing industry and their measurement requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you