Only show results in Virginia? Ok

environmental monitoring instrumention Applications

  • Sediment Pollution Instruments

    Our SediMeter instruments are designed with sediment pollution monitoring in mind. They form part of a system with network and software components designed specifically to be the best possible sediment pollution monitoring system.

    By Lindorm, Inc. based in Medley, FLORIDA (USA).

  • Premium

    Process instrumentation and analytics solutions for environmental monitoring industry

    From monitoring impurities in vents, stacks, air or water to point source or area monitoring, automatic and on-line measurement is an important tool. This type of measurement will detect, quantify and assist in reducing emissions. Siemens analytical products are utilized for many of these measurements.

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA).

  • Premium

    Instruments and analyzers for DHI measurements

    Diffuse irradiance measurements: Diffuse Horizontal Irradiance measurements are performed with a thermopile sensor called Pyranometer mounted on a Sun tracker or shading ring.  When the pyranometer is installed on an automatic sun tracker, the diffuse radiation can be measured in two different ways. Measuring Diffuse irradiance requires an accurate pyranometer with low offset properties. Duirng clear sky conditions the DHI irradiance (W/m2) is less than 20% of the total irradiance. Zero offsets lead to underestimation of the measured irradiance.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Environmental Noise Monitoring

    The XL2 Sound Level Meter provides the dedicated solution for monitoring environmental noise in industry and communities. It measures levels and detailed spectral information in parallel and stores the data on an SD card for post-processing and reporting. A linear audio file (wav-file) may be recorded for detailed simultaneous analysis. The type approved class 1 sound level meter offers a flexible handheld instrument with accurate and reliable measurements. Data recording can be scheduled to occur at pre-determined times or automatically triggered when pre-determined levels are exceeded. Applications: Unattended noise monitoring stations (mobile or fixed installations) Annoyance assessment of noise according to ISO 1996-2 Construction noise measurements meeting the Section 61 notice (UK) Urban noise monitoring and noise mapping according to directive 2002/49/EC Verifying boundary noise level emission Advantages Handheld and compact design for field applications and stand-alone oper

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • Premium

    Instruments and analyzers for spectral irradiance portable solutions

    Reflection and transmission measurements on materials, vegetation, water or atmosphere give valuable information about biological, physical and chemical processes. Processes driven by solar radiation, in particular bands of the spectrum through the so called action spectra, can be analysed or quantified with a sensor senitive in the particular spectral band. The MS-720 portable spectroradiometer gives total freedom to be used in different applications and range of the spectrum between 350 - 1050 nm.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Instruments and analyzers for measuring spectral irradiance

    Spectral irradiance is the irradiance of a surface per unit frequency or wavelength. spectral irradiance of a wavelength spectrum is measured per watts per square metre per nanometre (W·m−2·nm−1). Spectroradiometers are devices designed to measure the spectral power distribution of a source. From the spectral power distribution, the radiometric, photometric, and colorimetric quantities of light can be determined in order to measure, characterize, and calibrate light sources for various applications. Spectroradiometers typically measures the spectral irradiance and spectral radiance. Spectroradiometers systems work without the need to be connected to a PC. This makes them highly portable while maintaining the accuracy of a spectrometer.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Instruments and analyzers for DNI measurements with a pyrheliometer

    Solar Direct Normal Irradiance (DNI) represents the direct solar component and contains about 80% of the total solar energy budget on earth. Outside the atmosphere (AM0) the solar irradiance is considdered as a constant (1367 W/m2) that slightly fluctuates with a 11 year cycle. The DNI at the earth surface is highly variable due to the atmospheric conditions (clouds, aerosols, water vapor and molecules).

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Premium

    Sound instrumentation for environmental noise monitoring

    State of the art noise monitoring systems; Modern noise monitoring systems offer a wide range of advanced features and come with software that can analyze and structure long term measurements data efficiently. A complete noise monitoring system consists of one or more noise monitoring terminals, a noise server and work stations for presentation, post processing and reporting.

    By Norsonic AS based in Lierskogen, NORWAY.

  • Premium

    Analytical instruments for atomic spectroscopy

    Besides Mass Spectrometry, a further variety of analysis techniques are categorized as atomic spectroscopy. Analysis techniques which use inductively coupled plasma (ICP), such as ICP-OES and ICP-MS, are among these. With increasing environmental awareness backed by regulations, an increasingly important use of atomic spectroscopy techniques is in mercury analysis. Achieving a high mass flow control performance, e.g. high repeatability or an excellent turn-down ratio, is a prerequisite to achieve a high analyzer performance. For this, a number of Axetris customers rely on our products while designing such systems.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Determination of TOC in stack

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyser which uses hydrogen and other reference gases in pressurized cylinder. Operators must then approach the sampling point, often placed several meters from the ground, climbing chimneys of industrial settlements with instruments and cylinders. Is it possible making this job easier and safer? SOLUTION: Using the Polaris FID analyser produced by Pollution Srl, Italy, it is possible to carry out the VOCs monitoring according to EN 12619 without lifting accessories and heavy weights typically involved with FID analyser. Polaris FID analyser complies with this standard regulation but what is really a breakthrough and cutting-edge, is the unmatched portability and the next generation technology

    By Pollution Analytical Equipment based in Budrio (Bologna), ITALY.

  • Precision moisture analysis instruments for mercury detection for environmental agencies

    Robust analysis for inspection, investigation, remediation. If you are responsible for monitoring a wide range of environments for mercury contamination, it’s not enough that your instrument is accurate. It must also be responsive, reliable, and rugged. Jerome has the answer.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Environmental monitoring solution for fertilizer plants

    Measurement of particulates, SO2, NOX, ammonia, fluorides and greenhouse gas emissions from the fertilizer industry requires careful selection of instruments. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Machine condition monitoring for racing

    Overview

    Grand Prix racing utilizes cutting-edge high performance engines operation at extreme RPMs and temperatures. To keep the very valuable engines operational and competitive requires a team of mechanics paying careful attention to the engine and lubricant condition. To support this, engine condition monitoring based on oil analysis has become a widely practiced technique by Formula One racing teams. 

    Not only do the racing teams themselves take Spectro Scientific instruments to races, but the companies that design, build and test racing engines also are Spectro Scientific customers. We welcome the opportunity to continue to be of service to existing customers and to assist new customers with their oil analysis instrumentation requirements.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Measuring aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    The Series 8900 BTEX Analyzer provides direct measurement of Benzene, Toluene, Ethylbenzene, and Xylenes in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites. The Series 8900 BTEX Analyzer employs a photoionization detector (PID) as the sensing element. This detector is specific to volatile organic compounds. The Benzene, Toluene, Ethylbenzene, and Xylene`s in the gas sample are physically separated using proprietary GC columns.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    PTR-TOFMS systems for Flux Measurement of BVOCs

    The ultra-fast analysis capabilities of IONICON PTR-TOF instruments are essential for eddy covariance flux measurements, allowing to study deposition and emission rates of biogenic volatile organic compounds (BVOCs).

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Environmental monitoring solution for glass manufacturing areas

    Heavy metals, particulates, SO2 & NOx are the main emissions from the glass manufacturing industry and their measurement requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solution for pulp & paper

    Measurement of particulates, SO2, NOX, TRS and greenhouse gas emissions from the Pulp & Paper industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Environmental monitoring solution for aluminium industry

    Measurement of particulates, SO2, NOx, fluorides and greenhouse gas emissions from the aluminium industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you