Only show results available in Virginia? Ok

environmental monitoring technology Applications

  • Rugged Mobile Technology for Environmental Monitoring

    With the help of our fully rugged mobile computers, biologists, scientists and environmental consultants can work in any corner on Earth to collect environmental samples.

    By Handheld UK and Ireland Ltd based in Leamington Spa, UNITED KINGDOM.

  • Environmental Monitoring

    Environmental monitoring is becoming more important every day in local, national and international policies, showing the environmental awareness demanded by society.

    This fact gives rise to an increase in the amount of legislation that obliges companies to law enforcement. Thus, the necessity of making more pollutants controls means high analysis expenses to the companies, which need to subcontract this service.

    Although applications in this area advance, there is still a clear demand to get new portable and versatile analysis systems for many different application fields such as pollution in environmental or waste waters, monitoring nutrients in agricultural or horticultural water as well as general process control in chemistry industry. Because of the number of enviromental analysis required, there is a need for screening and monitoring measurements of these compounds at contaminated areas.

    Traditional monitoring techniques are typically based on laboratory analysis of field-collected samples that require considerable effort and expense, and the sample may change before analysis. Moreover, the equipment currently available is too large and expensive and it cannot be made portable.Alternatively, microfluidic and electrochemical sensor technologies can contribute to the development of new portable monitoring systems, complementing standard analytical methods for different environmental monitoring applications.In this way, the decentralization and integration of all those typical analyses is the paramount importance in order to reduce cost, simplify the analytical process and make more accessible these technologies to end-users. The development of portable, robust, and accurate Lab-on-a-Chip systems to monitor priority compounds such as contaminants, explosives, chemical warfare agents, inorganic and organic ions is a demand of modern society. Portability allows analyses to be carried out outside of the laboratory, minimizing the risk of contaminating the sample and leading to a faster response time at a lower cost.

    Thus, MicruX solutions and technologies open the gate to develop portable and esay-handly Lab-on-a-Chip devices in order to improve pollutants in-situ analysis in a very economic and efficient way.

    By MicruX Technologies based in Oviedo, SPAIN.

  • Thin-film Measurement Technology for Appliance Industry

    Measurement and control is an essential element in the success of products in the consumer appliance industry. Precise temperature measurement in cooking equipment along with flow control in cleaning equipment are crucial to the proper functioning of different appliances. IST’s thin film platinum temperature sensors are ideal for the long term precise measurements required by many of these devices. They are also capable of measuring extremely high temperatures at which some appliances operate. IST’s flow sensors, with the ability to measure pressure differential and flow direction, are more than capable of meeting the needs of products in the appliance industry.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Monitoring Sewage Flow

    Monitoring Sewage Flow is a critical tool for local governments, for water and waste-water utilities and for industrial plants. Sewage monitoring can prevent environmental disasters such as sewage overflow within populated neighborhoods or excessive waste flow into local lakes, rivers or sea. Sewage monitoring is also an important tool for short term and long term planning of the sewers infrastructure. Short term refers to just-in-time and cost effective maintenance. For example, sending the technical team to the correct manhole at the correct time to clean and eliminate obstructions. Long term planning refers to designing the correct pipe diameters and correct slopes to contain sewage from new new buildings and plants. Sewage monitoring is a tool for billing plants who produce sewage above their water intake and a tool for plants which utilize water to request lower utility bills. Solid Applied Technologies provides a complete and tested solution for Sewer Monitoring.

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • Laser detection solutions for environmental monitoring

    LDI laser remote sensing technology provides users with the tools to conduct broad and accurate environmental surveys of both water and ground in stressed environmental zones, which makes our products especially suitable for oil spill response operations. The technology is based on the Laser Induced Fluorescence (LIF) and realized by the Fluorescent Lidar Systems – FLS (LiDAR – Light Detection And Ranging).

    By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.

  • Premium

    Determination of TOC in stack

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyser which uses hydrogen and other reference gases in pressurized cylinder. Operators must then approach the sampling point, often placed several meters from the ground, climbing chimneys of industrial settlements with instruments and cylinders. Is it possible making this job easier and safer? SOLUTION: Using the Polaris FID analyser produced by Pollution Srl, Italy, it is possible to carry out the VOCs monitoring according to EN 12619 without lifting accessories and heavy weights typically involved with FID analyser. Polaris FID analyser complies with this standard regulation but what is really a breakthrough and cutting-edge, is the unmatched portability and the next generation technology

    By Pollution Srl based in Budrio, ITALY.

  • Fire Weather Monitoring

    FTS is the world leader in environmental monitoring solutions for fire weather. FTS stations are in use by every one of the top 50 government forest management agencies in every corner of the United States and Canada. No one else dedicates as much of its research and development efforts to the needs of fire weather professionals. FTS portable and fixed-site weather stations set the standard for reliability and simplicity of operation, maintenance, and installation. As a manufacturer, we design and engineer the leading datalogger that is approved and fully supported by the NIFC Remote Sensing Fire Weather Support Unit (RSFWSU). Our G5 GOES / Meteosat transmitter is recognized as the most reliable GOES technology available, and is licensed for use by other environmental monitoring equipment manufacturers.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Meteorological Monitoring

    FTS designs complete, turn-key systems for a variety of environmental monitoring applications. Our systems are based upon the Axiom datalogger—a key technology that deliver rugged reliability in any environment, simplicity of operation, low maintenance costs, and extremely accurate data.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Thin-film Measurement Technology for Building Automation Industry

    The Heating Ventilation and Air-condition (HVAC) market in the Building Automation industry focuses on controlling atmospheric conditions to make them more suitable. Among the conditions controlled by these systems are temperature and humidity. aIST’s thin film platinum and nickel temperature sensors are ideal for heat meter monitoring and control applications in HVAC because of their high resolution and long term accuracy. Additionally, IST’s thin film capacitive humidity sensors are ideal for controlling the relative humidity of an environment due to their rapid response times and accuracy over time. Thermal mass flow sensors also have applications in the HVAC industry as an indicator of duct airflow

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Core Analysis for unconventional reservoirs

    Low field Nuclear Magnetic Resonance (NMR) is routinely used in core analysis laboratories to examine the T2 relaxation time distribution of fluids in core plugs. These distributions can be interpreted to give information on: pore size distributions; permeability; total and effective porosity; free fluid index and bound water volumes. The partnership between Oxford Instruments and Green Imaging Technologies allows us to integrate hardware and software to enable any core analysis laboratory to generate these petrophysical results without the need for in-depth knowledge of NMR.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Continuous Instream Monitoring

    Turbidity in natural waters is recognized as an important indicator of its environmental health, and because it's a good surrogate for suspended sediment, monitoring turbidity has always been the "holy grail" for hydrologists. But because of earlier technology, "turbidity" has traditionally been a "bad word". The DTS-12 turbidity sensor is the first sensor to make turbidity monitoring practical, and no longer difficult, inaccurate, expensive, or labor-intensive. Turbidity is the cloudiness or murkiness of water caused by suspended organic or inorganic materials. Turbidity in natural waters is recognized as an important indicator of its environmental health.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Rugged Mobile Technology for Hazardous Areas

    You could say that all the work our computers do is environmental work, since holding up to any environment is exactly what these handhelds are made to do. No matter the environment, our devices have you covered.

    By Handheld UK and Ireland Ltd based in Leamington Spa, UNITED KINGDOM.

  • GIS software for conservation

    Sustaining biodiversity and preventing fragmentation, extinction, and natural resource depletion are crucial to conservation of the environment. The ability to use GIS technology as a tool to monitor habitat change, track wildlife demographics, and predict future land and resource use is essential to conservation goals and practices. The spatial and thematic aspects of GIS technology enable users to overlay various data to delineate and predict the future of our resources, land, ocean, plant life, and wildlife. This geoprocessing enables decision makers to implement laws and programs that will protect and sustain the environment and its resources.

    By Esri based in Redlands, CALIFORNIA (USA).

  • Premium

    Gas analysis & monitoring system for greenhouse gases analysis

    The rising levels of manmade greenhouse gases (GHGs) in the atmosphere and their resulting impact on climate is now one of the single biggest technological and environmental challenges facing the world. This makes intensified monitoring of these gases more critical than ever in order to better quantify the role of the numerous natural and manmade sources, sinks and buffers involved in the cycles of GHGs. It also enables us to objectively audit GHG fluxes at the factory, city, country and continental level. Such objective auditing is ultimately essential to facilitate effective enforcement and compliance with any regulations, laws, treaties and trading agreements based on GHG metrics such as carbon footprints.

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Turn-key meteorological or hydrometeorological systems

    FTS designs complete, turn-key systems for a variety of environmental monitoring applications. Our systems are based upon the Axiom datalogger—a key technology that deliver rugged reliability in any environment, simplicity of operation, low maintenance costs, and extremely accurate data.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Premium

    Radiation Monitoring for Nuclear Power

    The nuclear industry, including power plants, research centers and fuel cycle specialists are obliged by law to protect their staff, local populations, the environment and the processes they employ. With this in mind, Saphymo has developed a full range of dedicated products and systems, and plays a major role in radiation protection and ionizing radiation monitoring in both France and on an international scale. Saphymo constantly strives to satisfy safety requirements to the full, reinforce its technological know-how in the management of complex systems and anticipate customer needs, and offers adapted solutions in the fields of operational dosimetry, Radiation Monitoring Systems, contamination control, access control, environmental protection and survey meters. Saphymo also offers a broad panel of services intended to maintain its products in operational condition.

    By Saphymo based in Montigny Le Bretonneux, FRANCE.

  • Monitoring of VOCs in Porewater

    Monitoring VOCs in porewater in the unsaturated zone is now possible.

    Sorbisense regularly offers new options for using the patented Sorbicell, which is used to monitor surface water, wastewater and groundwater.

    The latest is almost as “ground-breaking” as the SorbiCell itself. Until now it has been difficult, if not impossible, to directly monitor for volatile substances in pore water in the unsaturated zone. But the environmental consultancy firm Ejlskov A/S in Aarhus combined the use of Sorbisense sampling equipment with the proven technology of soil water samplers. With this combination, a practical new method is made available, which allows for monitoring the presence of porewater-dissolved VOCs above the groundwater table. This provides a significantly improved basis to define and determine the leaching risk to the groundwater, and thus allows for better and more cost-efficient decisions to prevent the pollution in reaching the groundwater.

    A simple construction with multiple options

    The application uses SorbiCell VOC combined with suction cells, soil water samplers. When installed correctly, and applied with the correct procedures, the suctions cells extract capillary bound water from the soil matrix. The system demands no other resource than a container that is put under vacuum. The vacuum in the container then ensures a flow through of the Sorbicell over a period of time, fx. 2-3 weeks. The method is highly suitable for monitoring a site over longer periods of time.

    By SORBISENSE based in Tjele, DENMARK.

  • Premium

    SF6 Leak Detection

    Monitoring Sulfur Hexafluoride (SF6) in the Power Utility Industry. Monitoring Sulfur Hexafluoride in the Power Utility Industry The SF6 Leak Detector 3434i from LumaSense offers an unmatched combination of performance and convenience. Based on the company’s Photoacoustic Spectroscopy (PAS) technology, the system offers highly accurate, reliable and stable quantitative gas analysis and detection. The growing environmental requirements and pressures regarding the use of SF6 make LumaSense’s system a coveted tool designed for everyday use. The system is able to measure the total concentration of the SF6 gas in an enclosed area, where the switchgear (or other SF6 filled equipment) is tested. Although only the total amount leaked is required by today’s standards, it is also advantageous to be able to pin point the leaks. This makes it easier to improve the integrity of the equipment. The SF6 Leak Detector system meets all of requirements for confined area such as substation Monitoring.

    By LumaSense Technologies, Inc. based in Santa Clara, CALIFORNIA (USA).

  • Premium

    Gas Detection Solutions for Carbon Fiber Manufacturing Industry

    The carbon fiber manufacturing industry requires a unique process control solution that conventional gas detection technology lacks. Boreal Laser’s line-of-sight laser based gas detection system is the perfect fit for measuring HF in various pan oven applications and stack emissions monitoring . Whether you are looking for gas detection solutions for safety, environmental or process control needs Boreal Laser has you covered.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Product stewardship

    The WERCS software suite provides more than just SDS authoring software. We provide tools, technology and services to improve your business processes and advance product stewardship. Through our regulatory compliance software, organizations gain efficiencies at multiple levels. Our SARA and VOC/HAPs reporting modules help to streamline environmental monitoring requirements. Raw material and new product introductions are streamlined through our chemical approval process module. We execute all facets of SDS management and distribution, including SDS services for suppliers. Our relationship with regulatory content providers ensures you are compliant to global regulations.

    By UL The WERCS based in Latham, NEW YORK (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you