Only show results available in Virginia? Ok

environmental parameter Applications

  • Environmental Reporting

    The Q EHS Environmental Reporting suite provides key tools for compliance with environmental legislation pertaining to the management, storage, use release, and disposal of hazardous materials. The software was developed to produce a variety of practical reports such as: • Performance and compliance assessments • Regulatory report submittals • Metrics and trend analyses for facility, divisional, and corporate management • On-site environmental incident occurrences Q EHS Air - Q EHS Waste - Q EHS Water - Q EHS...

    By Quantum Compliance based in Ann Arbor, MICHIGAN (USA).

  • Premium

    Chemiluminescense based analyzer for environmental applications

    Focuses on low NOx and NOx-related concentrations up to 100 ppm where high resolution is required. Parameters included are NO, NO2, NOx and NOy. Target applications are ambient air monitoring, indoor measurement, clean room measurement and atmospheric research.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Surface water quality testing for the environmental monitoring industry

    Aquaread stock a wide range of testing equipment designed to track a number of parameters and water quality testing measures. These can be used in many different bodies of water, including rivers, lakes, streams and seawater. The advantages of tracking water quality and testing for numerous parameters means that it is easier to notice changes which could cause damage to aquatic ecosystems. Early detection not only helps with monitoring water quality, but also helps to put mitigating measures in place. We have...

    By Aquaread Limited based in Broadstairs, UNITED KINGDOM.

  • Independent particle characterization services for environmental industries

    Particle size, particle concentration and other physical characterization analyses are critical to many environmental applications. Regulatory agencies in the environmental sphere demand strict compliance to standards and discharge regulations. Physical testing of samples for parameters such as particle size and concentration can give insight to the process control engineer on how effective and compliant a discharge handling system is operating. Particulate loading from both air emissions and waste water discharge...

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Fire Danger Rating / Forecasting

    For various reasons, including the changing global climate, wildfires are getting bigger, more destructive and more expensive. Effective, consistent and reliable detection of climate parameters is the key to preventing wildfires and managing the impact they have. Our equipment resides for decades in solitary confinement generally in very remote areas (often at the tops of mountains or deep within a national forest), constantly measuring and recording weather data. Once per hour, this data is transmitted back to...

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • NOx Analyzers for environmental, ambient air and research industry

    Focuses on low NOx and NOx-related concentrations up to 100 ppm where high resolution is required. Parameters included are NO, NO2, NOx and NOy. Target applications are ambient air monitoring, indoor measurement, clean room measurement and atmospheric research.

    By Eco Physics Inc. based in Ann Arbor, MICHIGAN (USA).

  • Laboratory equipments for capillary pressure

    Capillary pressure is a critical parameter for the oil exploration and production industry, and is a common measurement performed in core analysis laboratories. However, traditional techniques such as porous plate, centrifugation and mercury injection are laborious, time consuming and expensive.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Ambient air quality monitoring solutions for fence-line monitoring

    The OPSIS open-path monitoring system is an excellent tool for monitoring the air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan software....

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Carbon Dioxide Monitoring for Indoor Air Quality

    Introduction: Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide, carbon monoxide and volatile organic compounds to particulates, humidity and bacteria such as legionella. Carbon dioxide is one of the greatest variables affecting indoor environmental quality since it is produced by...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Indoor Air Quality Monitoring

    Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide (CO2), carbon monoxide (CO) and volatile organic compounds to particulates, humidity and bacteria such as legionella. CO2 is one of the greatest variables affecting indoor environmental quality since it is produced by people occupying...

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

  • Early warning systems for waste water industry

    Physico-chemical parameters alone are not sufficient in obtaining reliable information on treated wastewater. Online toxicity monitoring must be performed in combination with routine chemical analysis. The assessment of biological effects of wastewater discharges in the ecosystems is today considered relevant and ecotoxicological tests identifying the ecological hazard are useful tools for the identification of environmental impacts.

    By microLAN B.V. - Aqualabo Group based in Waalwijk, NETHERLANDS.

  • Analytical services for mining industry

    Maxxam provides the mining industry with comprehensive analytical testing services including water, soil and air quality parameters. Analytical testing ranges from metal leaching and acid rock drainage, to Ecotoxicology services and environmental chemistry. We are accredited for specific analytical tests related to mining test regulations and requirements. Along with being accredited for tests such as environmental chemistry and acid mine drainage, below is an excerpt of the laboratory’s current scope of accreditat...

    By Maxxam Analytics based in Mississauga, ONTARIO (CANADA).

  • Monitoring industrial trade discharge for wastewater treatement industry

    Industry has had to respond to the requirements of progressive environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide trade discharge monitoring and perform...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Laboratory equipments for fat oil & grease FOG in waste water

    Measurement of Fats, Oils and Grease (FOG) in waste water is a crucial parameter in water quality control and environmental monitoring performed by water suppliers’ laboratories and environmental authorities; the contamination builds up in the sewerage system and will eventually lead to blockages. Typically the waste water is analysed by first passing a large volume through a filter then selectively determining the grease build-up on the dried filter by an analytical method.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Final effluent monitoring for wastewater treatment industry

    Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent...

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Water measurement systems & sensors for water quality monitoring

    Effective water quality monitoring is the key to environmental protection of watercourses and for reliable process control and wastewater treatment.  Discharge consents under EPR regulations dictate that water quality monitoring is undertaken to ensure that consented parameters are below the consented concentrations.  Traditionally this has been done using water quality sampling methods but increasingly automatic water quality measurement sensors linked to real-time telemetry is seen as the most...

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Percent Aromatics in Gasoline #3008

    The aromatic content of gasoline determines many of its combustion properties. Since it also impacts the environmental characteristics of the fuel it is desirable to have accurate measurements of this parameter. The traditional analytical method for measuring aromatics is either gas chromatography (GC) or an older method entitled fluorescent indicator adsorption (FIA), both of which are time and labor intensive. This note will discuss the use of Guided Wave hardware and software tools for the measurement of %...

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

  • Radionuclide Monitoring for Nuclear Power Plants

    The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant`s radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to...

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you