Only show results in Virginia? Ok

environmental process Applications

  • Municipal Biosolids Processing

    Vulcan® Systems and Mannco Wastewater & Soil Solutions are exclusive partners for the biosolids market in the US, Panama, and Cuba. The BIO-PRILL is a complete system designed to produce uniform Class "A" PFRP biosolid fertilizer prills from dewatered biosolids. The system is supplied complete with all components to turn biosolids into an environmentally sustainable and soil-enriching agricultural product as well as a potential revenue stream for municipalities. Dewatered biosolids are introduced through a wet material feed hopper and mixed with dry biosolids in batch mixers. A proper ratio of thoroughly mixed materials entering the dryer ensures the consistency required to efficiently reduce moisture and to optimize the formation of Class "A" PFRP dry biosolids. Mixed material is conveyed through the dryer where the heat removes excess moisture and reduces pathogens.

    By Vulcan Systems based in Moberly, MISSOURI (USA).

  • Premium

    Medical Waste Processing

    Presently, Medical Waste Processing has different ways, such as sanitary landfill, incineration by pyralysis, autoclave sterilization, chemical disinfection, microwave sterilization, thermal decomposition, and plasma process, ect. Harden Machinery has lots of experience in medical waste processing, we offer kinds of professional shredders to handle the processing. The medical waste can be shredded into uniform in size, which is smaller than 50mm to improve the incineration efficiency. Harden’s Medical waste crusher has good sealing and corrosion resistance. Cutter blades made of German alloy material, ensure good resistance and high impact strength, It meets the high degree of mixing medical waste requirements to shred stainless steel equipment, prosthetics and other metal products. Medical waste processing system has a reasonable blades layout and high pass rate of the screen structure to ensure the crusher is not blocked.

    By Harden Industries Ltd. based in Zhongshan, CHINA.

  • Premium

    Environmental dewatering solutions for mining and mineral processing

    TenCate Geotube technology provides cost-effective and efficient dewatering and containment in the mining and mineral processing industry. In mining and mineral processing (mine tailings, coal sludge, etc), TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or reduces storage footprint by sometimes 50 to 80%. Conditioners or polymers are normally used to promote flocculation to improve dewatering rates, solids retention, filtrate quality and increase in solids consolidation within the tubes.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Industrial process and environmental monitoring

    Laser Gas analyzer Oil refining, CO, CO2, O2, CH4 Ethylene cracking CO, CO2, etc. EO/EG, PE/PP, O2, C2H4, etc. Ethyl benzene/styrene monomer/PS, O2, CO/CO2, Trace water in the benzene PTA, CO, CO2, O2 Coal gasification O2 Mathanol/ammonia/urea O2, CO, CO2, NH3, etc. Chlor-alkali/PVC H2O, O2, CO2, C2H4, etc Sulphuric acid O2

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Environmental monitoring solution for mineral processing

    Measurement of particulates, SO2, NOX, CO, hydrocarbons and greenhouse gas emissions from the mineral process industries requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Analysis for industrial processes

    Analysis for industrial processes.

    By NT Sensors S.L. based in El Catllar, SPAIN.

  • Premium

    Consulting Services and Software Solutions for Process Industry

    We optimize your logistics; Companies are looking to improve in three essential areas:  Become more agile, Boost quality, Cut costs. The Implico Group offers its consulting services and software solutions targeting process optimization to mid-sized companies and enterprises anywhere in the world. We combine our many years of experience gained in countless projects in the process industry with the very latest IT and ERP/SAP expertise, plus our highperformance solutions.

    By Implico Group based in Hamburg, GERMANY.

  • Premium

    Environmental dewatering solutions for industrial wastewater processing

    TenCate Geotube technology provides cost-effective and sure dewatering and containment in a wide variety of industries.  In Power and Utility, Pulp and Paper and other general industries that produce sludge, TenCate Geotube dewatering technology enables the recovery of valuable materials, provides structural stability, improves water quality, or just reduces storage footprint by sometimes 50 to 80%.  The dewatering containers can be custom-sized to the application, placed in available space between other structures, and removed once dewatering is complete. In some cases, conditioners or polymers are used to promote flocculation to increase dewatering rate, improve solids retention and filtrate quality.

    By TenCate Geosynthetics Netherlands bv based in AE in Nijverdal, NETHERLANDS.

  • Environmental Compliance and Management Services

    CSRware professionals can assist you with getting started on how to identify your GHG reduction goals, how to identify energy, water, waste, chemical and other natural resource data to apply metrics for performance management. We can work with your team to develop survey's, scorecards or other mechanisms to gather the data required to help identify where your organization is at risk of not being in compliance. Our team will determine how to implement software to automate the process for you in order to make environmental compliance and risk management a repeatable process. You can then track, measure and take action on improving operations or reporting to internal and external business partners.

    By CSRware, Inc. based in San Francisco, CALIFORNIA (USA).

  • Premium

    Analytical and measuring instruments of environmental

    The environmental field requires robust, high-sensitivity analysis capable of complying with regulations in order to always meet the stringent target values that have been established to assure the safety of the water supply and protect the environment. Moreover, in laboratories where more than 100 samples are processed per day, increasing the throughput and saving energy are issues of concern.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Activity Management

    Managing tasks associated with compliance (regulatory, ISO, customer, auditing) requires tremendous oversight. Companies often become reactive to organizational incidents, spending precious time and resources “managing” through a resolution rather than proactively addressing issues before they become problems. Q EHS Activity Management reverses the cycle with a comprehensive tool set to improve processes related to tasks, audits, inspections, incidents, and spills. It provides a means to rapidly assess and respond to operational, regulatory, maintenance, safety, audit tasks, and ISO procedures. These tools can run on browsers, tablets, and smart phones, giving you and your staff maximum flexibility. With Q EHS Activity Management you will: • Accelerate proactive responses to potential compliance issues • Streamline the process of tracking EHS tasks and documenting non-conformance • Standardize procedures and data across the organization • Eliminate redundant activities

    By Quantum Compliance based in Ann Arbor, MICHIGAN (USA).

  • Acid Regeneration Process

    Acid Regeneration Process The commercially most relevant field of application for HCl regeneration processes is the recovery of HCl from waste pickle liquors from carbon steel pickling lines. Other applications include the production of metal oxides such as, but not limited, to Al2O3 and MgO as well as rare earth oxides by pyrohydrolysis of aqueous metal chloride or rare earth chloride solutions. A number of different process routes are available. The most widely used is based on pyrohydrolysis and adiabatic absorption of hydrogen chloride in water, a process invented in the 1960s. However tightening environmental standards and stringent air permit policies render it increasingly difficult to establish new pyrohydrolysis based acid regeneration plants.

    By Insheng Engineering Co., Ltd based in Pingtung, TAIWAN.

  • Premium

    Carbon footprinting calculations for environmental management

    With its expertise in calculating and managing emissions data, CERC offers a range of services to assess greenhouse gas emissions, from determining the carbon footprint of a single industrial process, to compiling a greenhouse gas inventory for a whole geographical area.

    CERC uses methods and emission factors laid out by the Intergovernmental Panel on Climate Change (IPCC). Emissions from transport, industrial, heating and agricultural activities are calculated and stored using the EMIT software package.

    By Cambridge Environmental Research Consultants (CERC) based in Cambridge, UNITED KINGDOM.

  • Premium

    Treatment, Optimization and Design for WWTP's

    The purpose of the work is to demonstrate the rationale, procedures and advantages of using process simulation to evaluate the steps involved in process upgrades from conventional or fully aerobic process conditions to multi stage systems capable of operating as a BNR system. In the author's experience and the conclusions of this presentation are that the use of these systems in daily operations and in the preparation for process upgrading is empowering and economically advantageous. SASSPRO(Steady State Activated Sludge Simulator, Program)

    By WeDoTanks.com LLC based in Sahuarita, ARIZONA (USA).

  • Independent particle characterization services for environmental industries

    Particle size, particle concentration and other physical characterization analyses are critical to many environmental applications. Regulatory agencies in the environmental sphere demand strict compliance to standards and discharge regulations. Physical testing of samples for parameters such as particle size and concentration can give insight to the process control engineer on how effective and compliant a discharge handling system is operating. Particulate loading from both air emissions and waste water discharge are monitored in many industry sectors and PTL testing provides valuable supporting data in this monitoring process.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Environmental technology for chilling - crystallisation industry

    For the generation of chilled water (down to 0°C) as well as for diverse crystallisation processes Körting steam jet chilling plants are used. This special chilling technique uses waste heat at a temperature level down to 80°C as motive energy. The first plants with combination of power/heat/chilling coupling are already in operation.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Q-EHS Enterprise Application

    The Q EHS Enterprise system is a fully integrated, Environmental, Health and Safety (EH&S) analytical platform that simplifies your corporation-wide EH&S information management, increases workplace safety, and reduces risk exposure to regulatory citations. Q EHS Enterprise can help you: • Protect your employees’ health and safety in the workplace • Reduce your risk exposure associated with noncompliance through improved transparency of EHS management • Improve the efficiency of your current EH&S information management processes Q EHS Enterprise centralizes, tracks, and analyzes your EH&S data and practices across all facilities to provide a reliable audit of your EH&S compliance status. The metrics and graphs you retrieve from Q EHS Enterprise enable quick responses to compliance issues and to other EH&S risks (operational, maintenance, safety, audit tasks, etc.). Q EHS Enterprise is built on a foundation that incorporates your company’s fundamental data—

    By Quantum Compliance based in Ann Arbor, MICHIGAN (USA).

  • Waste handling for kitchens

    Wherever food is handled, waste is produced. Waste food creates hygiene risks no matter where it is transported or stored, and handling it is a time-consuming, non-profitable process. The Envac system does away with all manual handling and transport, and instead waste food is dealt with and turned into an important environmental resource.

    By Envac AB based in Stockholm, SWEDEN.

  • Industrail Filtration

    Automotive Paints, Coating, Inks, Dispersions Water and Water Treatment Solvents Lubricants, Metalworking Fluids Parts Cleaning Solutions Pulp and Paper Pharmaceutical Food Processing Chemical Processing Edible Oils Potable Water, Beer, Wine

  • Environmental Monitoring

    Environmental monitoring is becoming more important every day in local, national and international policies, showing the environmental awareness demanded by society.

    This fact gives rise to an increase in the amount of legislation that obliges companies to law enforcement. Thus, the necessity of making more pollutants controls means high analysis expenses to the companies, which need to subcontract this service.

    Although applications in this area advance, there is still a clear demand to get new portable and versatile analysis systems for many different application fields such as pollution in environmental or waste waters, monitoring nutrients in agricultural or horticultural water as well as general process control in chemistry industry. Because of the number of enviromental analysis required, there is a need for screening and monitoring measurements of these compounds at contaminated areas.

    Traditional monitoring techniques are typically based on laboratory analysis of field-collected samples that require considerable effort and expense, and the sample may change before analysis. Moreover, the equipment currently available is too large and expensive and it cannot be made portable.Alternatively, microfluidic and electrochemical sensor technologies can contribute to the development of new portable monitoring systems, complementing standard analytical methods for different environmental monitoring applications.In this way, the decentralization and integration of all those typical analyses is the paramount importance in order to reduce cost, simplify the analytical process and make more accessible these technologies to end-users. The development of portable, robust, and accurate Lab-on-a-Chip systems to monitor priority compounds such as contaminants, explosives, chemical warfare agents, inorganic and organic ions is a demand of modern society. Portability allows analyses to be carried out outside of the laboratory, minimizing the risk of contaminating the sample and leading to a faster response time at a lower cost.

    Thus, MicruX solutions and technologies open the gate to develop portable and esay-handly Lab-on-a-Chip devices in order to improve pollutants in-situ analysis in a very economic and efficient way.

    By MicruX Technologies based in Oviedo, SPAIN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you