Only show results in Virginia? Ok

environmental science Applications

  • GIS software for archaeology

    Archaeologists, as researchers and resource managers, understand the importance of geography. Its variables exert a strong influence on human behavior today, and archaeologists are aware of the significance of this influence in the past. Geography also influences the degree of exposure of archaeological sites, and the impacts that they face from human activity and natural forces. GIS facilitates mapping to analyze depositional patterns as well as catalog and quantify artifacts. It can provide a well-structured descriptive and analytical tool for identifying spatial patterns.

    By Esri based in Redlands, CALIFORNIA (USA).

  • X-ray fluorescence for environmental research

    Environmental research is perfectly supported with Bruker AXS wavelength dispersive X-ray fluorescence spectrometers (WDXRF) S8 TIGER. Accurate and precise determination of hazardous elements down to the sub-ppm level, reliable identification of elements due to high spectral resolution, high analytical performance even for light elements: The TIGER are perfectly suited for these analytical tasks.

    By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).

  • Premium

    PTR-MS systems for environmental research

    IONICON PTR-MS systems are well established tools in environmental research. Their fast response-times and ultra-low detection limits help researchers all over the planet to better understand the world we live in.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Premium

    PTR-MS systems for biological research

    Real-time measurement of plant defense and leaf wounding reactions. Measurement of VOCs in dynamic biological systems with low detection limit and without sample preparation.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Data analysis and visualization tools for ocean and lake sciences

    Oceanic and lake sciences challenge the abilities of traditional software tools. Virtually everything of interest lies beneath the surface. This is a 3D world with complex issues that affect the life in these water bodies and all life on Earth. EVS, MVS, and EnterVol’s modular toolkits provide the technology to address a myriad of surface and subsurface issues.

    By C Tech Development Corporation based in Henderson, NEVADA (USA).

  • Premium

    Environmental sampling for soil researching

    By Argus-Hazco based in Chesterfield, MICHIGAN (USA).

  • Industrial and commercial water filtration for environmental

    These days we are becoming more and more aware of our environmental impact and carbon footprint, and in some cases the Government may even penalise companies who are not doing all they can to minimise the environmental impact of their activities. The Environment Agency instill certain limitations for industrial waste water users in regards to where and how water may be discharged – whether accidentally or purposefully, the discharge of waste water in to a river can lead to costly fines and very bad PR for your company.

    By Hydro-Gen Engineering Ltd based in Widnes, UNITED KINGDOM.

  • Analysis of Contaminated Plant Leaves Using J200 Tandem LA – LIBS Instrument

    This application note highlights how the J200 Tandem LA – LIBS Instrument from Applied Spectra provides powerful elemental imaging for toxic elements such as Pb and As in plant leaves. Request this application note at http://appliedspectra.com/applications/application-notes.html

    By Applied Spectra, Inc. based in Fremont, CALIFORNIA (USA).

  • Premium

    Medical and Bio-hazard Waste Treatment Technology with zero emissions

    The OZONATOR technology is the new NG-3000 model capable of processing up to 400 kg (880 lbs.) of waste every twenty minutes (1200 kg per hour) and can operate on a continuous basis 24 hours per day – 7 days per week with about one hour per week for service and cleaning. The waste is shredded with up to 90% reduction in volume and treated with a high concentration of ozone (sterilized) and then compacted into a stainless steel transport bin for disposal at landfill as general waste (daily cover) or the treated waste can be used as fuel in a WTE (waste-to-energy) facility. (CV 36.4 MJ/kg)

    By OZONATOR Industries Limited based in Regina, SASKATCHEWAN (CANADA).

  • Premium

    Laboratory information management for environmental laboratories

    Under the Thermo Scientific brand of Thermo Fisher Scientific, Inc. (NYSE:TMO), we help scientists meet the challenges they face in the lab or in the field every day. From routine analysis to new discoveries, our innovations help professionals do the science they need to do, the way they want to do it.

    By Thermo Fisher Scientific, LIMS & Laboratory Software based in Philadelphia, PENNSYLVANIA (USA).

  • Premium

    Air sampling & monitoring systems for biomedical, chemical & pharmaceutical industry

    HI-Q Environmental Product Company provides air sampling instrumentation & systems for several niche applications in a number of disciplines in the broad area of `Life Sciences`. In the Biomedical, Chemical, & Pharmaceutical industries, HI-Q has marketed instrumentation for certain applications for many years. Our ambient, in-door breathing level air samplers, commonly known in the industry as `Goose-Neck` or `Giraffe` air samplers have been instrumental in analyzing workplace exposure. HI-Q has also developed accurate pre & post heap filtration stack sampling systems to aid laboratories in inventory control & atmospheric exposure monitoring for chemicals such as Radio Iodine.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Filtration systems & solutions for wastewater treatment industry

    The removal of contaminants from untreated water has become a leading issue, due to environmental concerns and the threat of future water shortage. An effective purification process is necessary to eliminate organic, chemical or other debris to meet stringent regulations for drinking water, as well as for the chemical, industrial, pharmaceutical and science markets.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Data analysis and visualization tools for geophysical analysis

    EVS, MVS, and EnterVol excel in their ability to handle analysis and visualization of geophysical data. For example, 3D resistivity can be analyzed from 2D ground arrays and airborne surveys. Electrical resistivity surveys offer the ability to inexpensively collect vast quantities of three-dimensional subsurface data. Environmental sciences, mining, archaeology and many other disciplines can benefit from these measurement techniques. However, their large irregular datasets offer significant challenges related to analysis and visualization. C Tech’s EVS , MVS, and EnterVol excel in their ability to address these complex issues.

    By C Tech Development Corporation based in Henderson, NEVADA (USA).

  • Data analysis and visualization tools for groundwater and solute transport

    Groundwater and Solute Transport modeling is a sub discipline of environmental sciences with unique needs. Modeling has long utilized 3D simulations, but the ability to visualize and animate the results has lagged far behind the simulation technology. EVS-PRO, MVS, and EnterVol offer professional level presentation tools worthy of the current state-of-the-art in modeling. Visualization of groundwater and solute transport modeling results can be performed with all versions of C Tech’s software except for EVS for ArcView. EVS-Pro, MVS, and EnterVol are particularly well suited for animation and visualization of earth science modeling results from third party modeling systems such as USGS MODFLOW, MT3D, GMS©, Groundwater Vistas© and Visual MODFLOW©. Both combine animation capabilities with a powerful suite of visualization tools in a fully customizable environment.

    By C Tech Development Corporation based in Henderson, NEVADA (USA).

  • Data analysis and visualization tools for groundwater modeling

    Groundwater and Solute Transport modeling is a sub discipline of environmental sciences with unique needs. Modeling has long utilized 3D simulations, but the ability to visualize the results has lagged far behind the simulation technology. EVS-PRO and MVS have long offered professional level presentation tools worthy of the current state-of-the-art in modeling, and EnterVol now opens that door to GIS professionals around the world. Visualization of groundwater and solute transport modeling results can be performed from third party modeling systems such as USGS MODFLOW, MT3D, GMS©, Groundwater Vistas and Visual MODFLOW© using C Tech’s tools to convert these modeling outputs into EFF format. In conjunction with Lawrence Livermore National Laboratory and IT Group, C Tech performed the visualization and animation of the output from a Groundwater Vistas MODFLOW and MT3D99 simulation of a large industrial complex in the central valley area of California.  This site exhibits highly channelized flow which is evidenced by the flow paths. Note that flow in the lower aquifer crosses underneath the upper channels at about 30 degrees!

    By C Tech Development Corporation based in Henderson, NEVADA (USA).

  • Data analysis and visualization tools for soil contamination

    C Tech is known worldwide for our innovative approaches to Soil contamination modeling. Soil contaminant data can often span 6 orders of magnitude or more. Extremely high gradients coupled with limited budgets make it very challenging to develop reasonable models of contaminant distributions. EnterVol incorporates C Tech’s proven expert systems to conquer the challenging process of developing reasonable volumetric plume models. EnterVol provides the ability to present reams of complex geologic and environmental contamination data in a form that is easily comprehended by a judge, jury or the public. In our world where 3D models are commonplace on television, environmental litigators cannot afford to present complex geochemistry data with graphs and charts. You need defensible, data driven models with the realism to win the jury’s minds and the statistical foundation and sound science to stand up to the most rigorous cross examination.

    By C Tech Development Corporation based in Henderson, NEVADA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you