Only show results in Virginia? Ok

environmental testing Applications

  • Environmental Monitoring

    Environmental monitoring is becoming more important every day in local, national and international policies, showing the environmental awareness demanded by society.

    This fact gives rise to an increase in the amount of legislation that obliges companies to law enforcement. Thus, the necessity of making more pollutants controls means high analysis expenses to the companies, which need to subcontract this service.

    Although applications in this area advance, there is still a clear demand to get new portable and versatile analysis systems for many different application fields such as pollution in environmental or waste waters, monitoring nutrients in agricultural or horticultural water as well as general process control in chemistry industry. Because of the number of enviromental analysis required, there is a need for screening and monitoring measurements of these compounds at contaminated areas.

    Traditional monitoring techniques are typically based on laboratory analysis of field-collected samples that require considerable effort and expense, and the sample may change before analysis. Moreover, the equipment currently available is too large and expensive and it cannot be made portable.Alternatively, microfluidic and electrochemical sensor technologies can contribute to the development of new portable monitoring systems, complementing standard analytical methods for different environmental monitoring applications.In this way, the decentralization and integration of all those typical analyses is the paramount importance in order to reduce cost, simplify the analytical process and make more accessible these technologies to end-users. The development of portable, robust, and accurate Lab-on-a-Chip systems to monitor priority compounds such as contaminants, explosives, chemical warfare agents, inorganic and organic ions is a demand of modern society. Portability allows analyses to be carried out outside of the laboratory, minimizing the risk of contaminating the sample and leading to a faster response time at a lower cost.

    Thus, MicruX solutions and technologies open the gate to develop portable and esay-handly Lab-on-a-Chip devices in order to improve pollutants in-situ analysis in a very economic and efficient way.

    By MicruX Technologies based in Oviedo, SPAIN.

  • Environmental testing for the energy industry

    By BSI based in Herndon, VIRGINIA (USA).

  • Environmental testing for the mining industry

    By BSI based in Herndon, VIRGINIA (USA).

  • environmental testing industry

    KOMEG Technology Industrial is an environmental testing industry leader in the design and manufacturing of climatic test chambers, thermal shock test chambers, walk-in chambers, burn-in rooms, aging test chambers, drying ovens, salt spray testers and medical laboratory equipment etc. for the military and industrial market place.

    By KOMEG Technology Industrial Co.,Ltd. based in Dongguan, CHINA.

  • Premium

    Surface Water Quality Testing for the Environmental Monitoring Industry

    We have a wide range of water testing equipment that is used to record trends across different water quality parameters in water bodies such as streams, lakes and rivers, as well as in seawater. Understanding these trends means that when there is a change it could be an early warning that there is a pollutant in the water or there has been a change in the aquatic ecosystem. Early detection is necessary to put mitigating measures in place.

    Our parameters are wide ranging, although the most commonly measured in surface water testing and monitoring are dissolved oxygen, pH, electrical conductivity and temperature, which are standard on most Aquaprobes. If you require specific parameters to be tested, there is the option to add additional parameters.

    By AQUAREAD Limited based in Broadstairs, UNITED KINGDOM.

  • Pulsar noise testing equipment for environmental noise monitoring

    Environmental noise is a major issue in most countries, especially in areas of high population, and the sources of noise and their adverse effects on our well-being are varied. In terms of assessing the impact of these issues, we need to be able to make suitable noise measurements, or in some cases monitor the noise levels for longer periods.

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM.

  • Premium

    Environmental testing & compliance screening for energy/environmental sector

    Compliance screening and testing is often carried out during the manufacturing phase of a product, and all the way through its disposal or recycling process. It ensures that products and materials meet specific standards or comply with international and local directives or regulations. These standards and regulations are introduced to ensure the quality and safety of a product, and to minimise or eliminate its negative impact on the environment and people. Examples of products or materials tested are: electrical and electronic equipment (for compliance with the Restriction of Hazardous Substances (RoHS) directive), waste oils, soil (soil remediation depending on contents of toxic metals), children’s products (for compliance with Consumer Product Safety Improvement Act of 2008), etc.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Determination of TOC in stack

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyser which uses hydrogen and other reference gases in pressurized cylinder. Operators must then approach the sampling point, often placed several meters from the ground, climbing chimneys of industrial settlements with instruments and cylinders. Is it possible making this job easier and safer? SOLUTION: Using the Polaris FID analyser produced by Pollution Srl, Italy, it is possible to carry out the VOCs monitoring according to EN 12619 without lifting accessories and heavy weights typically involved with FID analyser. Polaris FID analyser complies with this standard regulation but what is really a breakthrough and cutting-edge, is the unmatched portability and the next generation technology

    By Pollution Srl based in Budrio, ITALY.

  • Premium

    Water Testing for Environmental Applications

    Keeping the water in our lakes, rivers, and streams clean requires monitoring of water quality at many points as it gradually makes its way from its source to our oceans. Over the years ever increasing environmental concerns and regulations have heightened the need for increased diligence and tighter restrictions on wastewater quality. Control of water pollution was once concerned mainly with treating wastewater before it was discharged from a manufacturing facility into the nation`s waterways. Today, in many cases, there are restrictions on wastewater that is discharged to city sewer systems or to other publicly owned treatment facilities. Many jurisdictions even restrict or regulate the runoff of stormwater — affecting not only industrial and commercial land, but also residential properties as well.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Environmental data management for analytical laboratories

    EQuIS is designed to automate environmental data management and their associated compliance monitoring. It is used by many engineering consulting companies around the world.

    By EarthSoft, Inc based in Concord, MASSACHUSETTS (USA).

  • Respirometer Applications

    Measurement of the aerobic biodegradability of plastic materials (US Standard ASTM D5338, European Standard ISO 14855)

    By ECHO d.o.o. based in Slovenske Konjice, SLOVENIA.

  • Environmental Water Analysis

    Now for the first time you can measure ion levels in drinking / tap water, rivers and lakes using one probe and one set of calibration solutions. We have probes specially tailored for environmental testing. Our Environmental probes measure Chloride, Ammonium and Nitrogen or we have a total nitrogen probe measuring Ammonium and Nitrogen. Each probe can be calibrated in our unique calibration solutions allowing you to calibrate all sensors simultaneously and take measurements in drinking or river water. Probes are also available in our standard four or six ion combinations and can be custom packaged upon request.

    By CleanGrow based in Blackpool, IRELAND.

  • Environmental monitoring solution for fertilizer plants

    Measurement of particulates, SO2, NOX, ammonia, fluorides and greenhouse gas emissions from the fertilizer industry requires careful selection of instruments. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Testing linearity of Air quality analyzers

    To test gas analyzers for Air Quality monitoring, gas references must have concentration in the range of hundreds to tenths ppb. Test gas bottles with so small concentrations are expensive and unstable. With the gas divider BetaCAP30X100 it's possible to dilute high concentration test gases getting 30 dilution steps in the range from 1:100 to 1:3.000 of the original test gas bottle concentration. Traditionally MFC based diluters are used for this application, but now our capillaries based diluter is available, with more stable performances.

    By Be.T.A. Strumentazione Srl based in Borgolavezzaro, ITALY.

  • Premium

    Online Toxicity Monitoring

    By microLAN On-line Biomonitoring Systems based in Waalwijk, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you