Only show results available in Virginia? Ok

epa regulation Applications

  • Premium

    Air pollution control for the pharmaceutical industry

    From pill coating and mixing operations to Ethylene Oxide (ETO) sterilization, Anguil has had great success solving a wide range of emission control applications in the pharmaceutical industry. As companies struggle to comply with the EPA`s MACT (Maximum Achievable Control Technology) standards or international regulations, it is comforting to know that Anguil thoroughly understands your process. Over three decades of experience treating halogenated, VOC and HAP process streams enable us to efficiently solve your pollution control problems.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Agitation and mixing solutions for flue gas desulfurization

    FGD (Flue Gas Desulfurization) involves the treatment of flue gas from coal fired power plants.  The main goal is to remove sulfur, particulates, and other chemicals such as mercury from the flue gas prior to environmental release.  Governmental regulations by the EPA put limits on the amount of impurities which can be released into the air.   The use of mixers to clean and scrub the flue gas is utilized to help power companies meet permitted limits on the release of controlled substances.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Premium

    Aeration and mixing technologies for oil and gas wastewater treatment

    As more hydraulic fracturing wells come into operation, the stress on surface water and groundwater supply increases. The expanding volume of wastewater created needs to be captured, disposed of, or recycled in an environmentally sustainable manner so the EPA continues to increase regulations.  We will work with you to create a comprehensive solution to treat your wastewater, meet increasingly strict governmental regulations, and support long term water life cycle management.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Air pollution control solution for the particulate matter

    Regulations around the globe are becoming more and more stringent for particulate emissions. Macrotek offers some of the most efficient wet and dry technologies to meet the latest EPA, EU, and MOE standards. Often, particulate collection is combined with acid gas removal. Our most advanced wet-dry system meets and exceeds the most stringent regulations for both hazardous gases and particulate.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Gas/Liquid and liquid/liquid mixing for air stripping applications

    The growing demand placed on the world’s water, in combination with more stringent water quality regulations, have placed unprecedented demands to provide safe, reliable and aesthetically pleasing drinking water. Air stripping is an effective way of removing volatile organic chemicals (VOCs) from contaminated water and is commonly used for this application. Air stripping systems mix air with a water supply with the goal to generate the largest possible air-water contact area so that VOCs and dissolved gases, such as radon and hydrogen sulfide, will move from the water to the air. In addition to removing VOCs, air stripping is primarily used for removing oxidizing contaminants such as iron and manganese, improving taste, or removing odor. Air stripping is an EPA Best Available Technology (BAT) for some VOCs including benzene, toluene, xylene, tri/tetrachloroethylene, trihalomethanes, vinyl chloride and many others.

    By Mazzei Injector Company, LLC based in Bakersfield, CALIFORNIA (USA).

  • Premium

    Patented Waste Water Recovery System for Marine Refinishing Industry

    Due to recent expansion of EPA regulations regarding discharge of water containing contaminants, owners of boats and marinas have had to heighten their awareness regarding waste water containment. If caught discharging any contaminated water overboard, even an ounce or less of light oil mixed with bilge water will produce a visible sheen on the ground or on the water. This is identified by the EPA as a reportable discharge, of which large fines are possible including clean-up costs, and even criminal prosecution when flagrant violations are detected. The GEOMAT Waste Water containment system can be customized to fit any size marine application such as refinishing, marine detailing, and waste disposal.

    By GEOMAT based in Tampa, FLORIDA (USA).

  • Data Acquisition and Control

    Many companies worry over the quality of emissions data reported to the EPA. CEMS Experts is a skilled and experienced company with over 20 years of proven and dependable service to provide you with a reliable solution to your Analyzer Management and Data Acquisition Software needs. We supply customized DAS solutions for all federal (EPA), state and local CEMS regulations, plus off-the-shelf products for process monitoring, ambient air testing, or any other application requiring fast, reliable data capture and reporting.

    By CEMS Experts - a division of GK Associates, Inc. based in Simi Valley, CALIFORNIA (USA).

  • Safety incident tracking

    So you have a job that requires you to be involved in hazardous areas? Does your company promote high standards of safety culture? Are you regulated by the EPA, OSHA, and other federal, state, and local agencies? Documenting non-conformances and incidents in disparate static spreadsheets and home-grown solutions is not enough to meet most requirements. You need a centralized safety solution that also allows for detailed evaluations of root cause, corrective action tracking and trending performance so you can mitigate future risk and address systemic issues in the workplace. Perillon Workspace provides a comprehensive and powerful tool to quickly and efficiently identify trends, issues, and problems related to safety.

    By Perillon Software Inc. based in Acton, MASSACHUSETTS (USA).

  • Weather Monitoring Systems for industrial and utility sector

    The weather can have a major impact on many industrial processes and operations, both from an operational efficiency and/or safety standpoint. For example, real-time information about ambient atmospheric conditions provides the necessary input data required to make the proper decisions during an industrial emergency involving any type of hazardous material. Depending on the plant type, size and age, the federal Environmental Protection Agency (EPA), as well as municipal and state environmental regulatory organizations, also require that a number of basic meteorological variables are measured and recorded on site to ensure compliance with environmental regulations.

    By Climatronics Corporation based in Bohemia, NEW YORK (USA).

  • Vacuum excavation solutions for diamond saw slurry

    Concrete Cutting Contractors use our LP555SDT for saw slurry clean‐up. Concrete cutting using a Diamond Saw is the process of cutting expansion joints on freshly paved concrete roads. After cutting, water is used to eliminate dust thereby creating a slurry. This slurry has to be cleaned up due to EPA Regulations and the Vac-Tron vacuum excavator is the preferred clean-up method. Using water to create the slurry and then using the LP Series - Wet/Dry Industrial Vacuum Excavation System to eliminate any residue. Contractors perform this application frequently for airport runways and highway repair, as well as new construction.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Flaring Solutions for the Mine Gas Industry

    ABUTEC manufactures and services low emission, low NOx mine gas incinerators (i.e. enclosed flares) for the mine gas industry. We specialize in offering compact solutions and price competitive equipment, whether you are upgrading due to new regulations, evaluating a gas-to-energy project or looking for a green technology to take advantage of tax credits. We specifically size and design for your unique mine gas needs with flares ranging in size from 10 SCFM up to 6,000 SCFM. All ABUTEC flares and solutions meet or exceed EPA regulations and are BACT-approved. ABUTEC installed the first mine gas incinerator in the U.S. and is the only company to provide proven carbon credit solutions.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Cloud software solutions for hospitals

    You simply can`t afford a stinging environmental rebuke from the EPA or your state regulatory agency. Not only can fines be expensive, the reputational costs are inexcusable. You`ve invested far too much building trust in your community to take such a risk. The new proposed EPA regulations mean every facility that stores fuel must conform to a higher standard of due diligence. Failure to do so can mean heavy fines, increased liability, and deep brand damage. These new regulations augment and put teeth into the Energy Policy Act of 2005, which now expands to encompass all facilities that store fuel. Compliance requires monthly visual inspections and very specific record-keeping practices, best managed on a secure cloud solution. Titan cloud software keeps hospitals and related facilities on the high road, above the risks of regulatory non-compliance. It is the leading environmental compliance management software in the industry, currently managing over 60,000 USTs (Underground Storage Tanks), as well as thousands of ASTs (Above Ground Storage Tanks). Simply subscribe to Titan, and you`re well on your way to maintaining 100% compliance.

    By Titan Cloud Software Company, LLC based in Brentwood, TENNESSEE (USA).

  • Painting & Coating

    Paint fumes are Unbreathable. Spray Painting VOCs and Powder Coating dust are both harmful pollutants which are produced during painting operations. The volatile organic compounds (VOCs) emitted from paint can cause respiratory issues and require proper ventilation to remove harmful gasses from the work area. Powder Coating lines and spray painting produce dangerous fumes and dusts which need to be filtered or exhausted outside your facility. Industrial coatings and chemicals can produce toxic VOCs and foul odors which can effect worker`s health and reduce productivity. Some of the most common coatings are polymers which include polyurethane, epoxy and moisture-cure urethane. Many different industries required the use of glues, adhesives, solvents and different chemical agents in their production process, but are unsure of the best way to handle this nuisance. Exhausting fumes outside may be an option when VOCs are extremely dangerous and odorous but companies must also comply with EPA guidelines which regulate which gases can be emitted. In cold climates and in air-conditioned facilities, capturing, filtering and recirculating fumes can provide huge energy savings preventing costly heat loss and energy intensive air makeup systems. Utilizing activated carbon granules can allow operators to filter VOCs and odors from painting and cutting applications. Different quantities and types of carbon modules are required depending upon the contaminant. Contact Diversitech with an MSDS sheet detailing your chemical`s characteristics for an evaluation of your workplace air quality problem.?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Project Manager - Environmental Consulting

    Employee Type: Full-time Employee, open until filled Company: RTP Environmental Associates, Inc., Westbury, New York Req'd Education: Minimum B.S. Meteorology or closely related field Req’d Experience: Minimum 10 years environmental consulting and project management experience. We have a full-time environmental consulting career opportunity for a Project Manager in our Long Island (Westbury) office. RTP is a privately held, multi-disciplinary, full-service environmental consulting firm. We are seeking an experienced professional to join our team of highly experienced technical staff comprised of engineers, chemists, meteorologists, and scientists. RTP offers a work setting that allows room for growth and advancement. The successful applicant will have at least 10 to 15 years of environmental consulting experience as well as project management and marketing experience. The applicant must be well-versed in state and EPA regulations and understand the complexities associated with environmental compliance. The candidate must be motivated and growth oriented with the ability to attract and manage multi-disciplined projects. We are seeking an individual that can work independently and as part of a team. The individual should have progressive environmental experience and excellent communication, project management and client relation skills. The applicant will mentor staff and interact with clients and be an active participant in business development activities. The successful applicant must also have the ability to manage a heavy workload, conduct field work, travel and be on-call as needed. All applicants are required to have at least a B.S. in Meteorology or closely related field. RTP was founded in 1978; our years of experience provide us with excellent knowledge of the complex technical and regulatory issues involved in environmental permitting studies. Our professional staff provides our diverse client base with high quality, responsive and cost-effective consulting services. We offer excellent benefits and a competitive compensation program that rewards performance and results. Our comprehensive benefits program includes: medical and dental, 401k with company match, tuition reimbursement and much more.

    By RTP Environmental Associates, Inc. based in Green Brook, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you