Only show results available in Virginia? Ok

equipment wash water Applications

  • Vacuum excavation solutions for car wash pit clean out

    The Vac‐Tron trailer mounted vacuum system is the perfect tool for cleaning out car wash pits. By utilizing the vacuum portion of the system you can remove the oil, grease, chemical slick and garbage debris from the washout pits. Once all the debris is removed, you can utilize the high pressure water wand that offers 4 GPM at 4,000 psi to clean out the structure (i.e., walls, floor of the pits, grate overhead) leaving it clean and free of any build‐up. The Mini‐Combo Model is equipped with a jetter system which offers 15 GPM at 2200 psi. Use of this efficient tool will enable you to clean out the 4” lines that connect the washout pits so as to ensure proper drainage of contaminated water to the holding tank, if applicable.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Solutions for the equipment decontamination

    BioSolve Pinkwater is used for cleaning/decontaminating tools and equipment at remediation sites, in refineries, on drilling rigs, following spill cleanup, and in industrial maintenance operations. Generally applied with standard pressure washing equipment.  Most oil and tar build-up can be washed away on contact. For more severe contamination, use of a hot water system may yield better results.

    By The BioSolve Company based in Lexington, MASSACHUSETTS (USA).

  • Wastewater pretreatment solutions for original equipment manufacturers (OEM)

    Groundwater Treatment Systems. Wash Water Treatment Systems. Pre-treatment Before Evaporators and Pre-treatment Before Filtration.

    By Hydro Quip, Inc. (HQI) based in Seekonk, MASSACHUSETTS (USA).

  • Shredders for Electric and Electronic Equipment (WEEE) and Refrigerators

    Electric and electronic waste (WEEE), are coming from technology products such as home appliances (washing machines, vacuum cleaners), computers and tools. An economy based on the consumption such as today, provides a continuous increase of WEEE, and determines an increasing risk of dropping out in the environment or in landfills, with the consequences of pollution of soil, air, water and health human repercussions. These products should be handled properly and used for the differential recovery of the materials they are made of, such as copper, iron, steel, aluminum, glass, silver, thus avoiding a waste of resources that can be reused to build new equipment in addition to the environmental sustainability.

    By SA Eng. based in San Donà di Piave, ITALY.

  • Premium

    Municipal wastewater solutions for preliminary treatment industry

    Removing solids and grit plays a crucial role in protecting pumps and other equipment in a treatment facility. WesTech is your single source for headworks equipment to maximize your screening, washing, dewatering, grit removal and grit washing.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • REPLACING WATER SOFTENER WITH GREEN SCALEWATCHER WATER CONDITIONER

    Roper’s Restaurant, a cowboy themed restaurant in Albuquerque, New Mexico has replaced its water softener with the computerized, electronic, water-conditioner Scalewatcher from Scalewatcher North America. By installing Scalewatcher, the restaurant has avoided paying the $500 quoted for replacement media for its old water softener and also saved hundreds of dollars a year in salt and water thereby providing Roper’s with a short-term payback on the unit. Roper’s Restaurant, part of Outwest Eateries LLC dba, is located in a hard water area. This necessitated Bryce Chant, owner of Roper’s Restaurant using a water softener to prevent scale formation in the kitchen. “When I was given the price to repair our old water softener, I decided to install the Scalewatcher from Advance Plumbing”, said Bryce Chant of Roper’s Restaurant. We have had great success with it. Even though we had a water softener we still had hard water scale and a white ‘film’ in the dishwasher. Now with Scalewatcher that scale and ‘film’ has disappeared.” The average restaurant consumes 5,800 gallons of water daily, with 50% being used in the kitchen. If not properly treated, hard water can drain a restaurant’s bottom line due to the early renewal of capital equipment such as water heaters, boilers, coffee makers, dishwashers, steamers and other water-fed equipment. Hard water contains calcium carbonate that adheres to heating elements and the internal surfaces causing scale buildup that impairs efficiency. The limescale that deposits on the heating element will, if untreated, reduces efficiency, induces corrosion of the element and ultimately lead to appliance failure. In addition in restaurants, hard water also necessitates the use of additional detergents. In fact, for every additional grain of hard water, detergent use increases by between 2% and 4% per 1,000 gallons of water used. Many restaurants, like Roper’s use a water softener to reduce limescale. However, water softeners use copious amounts of both water and salt, which are expensive to buy and salt is also bulky to store. In addition, in many States now, including Southern California, municipalities and water departments are severely limiting, and in some cases prohibiting, the use of salt-regenerating water softeners due to concern regarding the increased levels of salt in ground water. The award-winning Scalewatcher system not only helps restaurants meet these regulations by minimizing salt usage but also saves money on salt purchase and has the additional benefit of removing scale from water-fed equipment. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “We are saving money each month because we do not have to purchase salt for the water softener and we are not dumping salt filled water down the drain because there is no brine process with Scalewatcher”, said Bryce Chant. “Living in New Mexico with our drought situation, I hated knowing all that water was being wasted. Scalewatcher is a truly ‘green’ technology that we are happy we have implemented”. Roper’s Restaurant has been so impressed with the Scalewatcher technology that the managers have bought units for their homes and have recommended it to family and friends. Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Premium

    Sialex Private Household Application

    Our products are installed on many industrial areas and in the private household. We have also experience with fluids other than water, which will receive more attention in the future. In the home “Scaling” and “Corrosion” of water pipes and appliances is not simply an inconvenience it is an expensive problem (replacing pipes and equipment (washing machines, showers, boilers etc.).

    By Phoenix Ring Manufaktur UG based in Erbach, GERMANY.

  • Wastewater pretreatment solutions for engineering and technical design marine

    Bilge Tank Washing, Marine Equipment and Ocean Vessels.

    By Hydro Quip, Inc. (HQI) based in Seekonk, MASSACHUSETTS (USA).

  • Premium

    Water treatment solutions for the paper & pulp industry

    As most of the largest industrial users of water, the paper and pulp industry have long treated water in accordance with environmental permits. Water is used in all major process stages, including raw materials preparation, pulp washing and screening and paper machines. Water is also used for process cooling, materials transport, equipment cleaning, general facilities operation and to generate steam for use in processes and on-site power generation. Lenntech provides sustainable complete solutions for ingredient, water and waste water treatment in paper & pulp industry considering a wide range of technologies and strategies.

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

  • Oil water separation for the food industry

    Packaged-food producers frequently use and then must discard large batches of cooking oil used in their process. Usually they drain most of the oil directly from equipment, but they must remove residual oil by regularly washing fryers, ovens, conveyors, and other machinery. 

    The oil mixes with the wash water and becomes part of the plants wastewater stream. Having oil in wastewater complicates the wastewater-treatment process by making it more expensive, more time-consuming, and less effective. Additionally. as with other manufacturers, packaged-food producers want to reduce waste and decrease the environmental impact of operations. That is why removing used oil and solids from wastewater before it is discharged is a priority.

    By Oil Skimmers, Inc. based in Cleveland, OHIO (USA).

  • CUSTOMER CONFIRMS LONGEVITY OF SCALEWATCHER ELECTRONIC WATER CONDITIONER

    Scalewatcher North America, manufacturer of the original, patented and award-winning computerized electronic water-conditioner, states in its literature that the device is produced to last at least 20 years and comes with a 10 year warranty. However, no reports have been received on the longevity of the units sold since the company was launched over 20 years ago. Now a customer in Gilroy, California has come forward requesting a new Scalewatcher unit after the device she purchased in 1992 finally stopped working. She purchased the new Scalewatcher from local dealer, Aqua Genesis, and reported that: “ I noticed that the sprinklers are covering more of an area than before. When I squirt water on the black and white tile patio table there are no longer any calcium spots even if I do not dry it off. The tile shower and the clear shower door are easier to wipe down after my shower. The new ScaleWatcher is much better than before. It certainly was time to replace the old one.” The new, innovative, electronic Scalewatcher water conditioner uses proven technology to quickly and effectively dissolve existing limescale and prevent it recurring, returning water systems and water-fed appliances such as kettles, washing machines and dishwashers to their former efficiency. It also removes scale around faucets, sinks, baths, plugholes and shower roses as well as preventing white marks on shower screens and mould on shower curtains. The system requires no plumbing, chemicals or maintenance and is environmentally friendly. In addition scale costs money for householders through additional cleaning products, the early renewal of water–fed equipment and additional costs to heat water. It is estimated that 40% more energy is needed to heat water in a system fouled with ¼ inch of limescale. Commenting Jan de Baat Doelman, President of Scalewatcher North America says: “We have always built Scalewatcher electronic water conditions to last and this latest information confirms the device’s longevity. Scalewatcher will pay for itself in less than three years and then carry on providing homes with a scale free environment many more years to come. ” Scalewatcher models are based on continuous research and over 20 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems start at $248.00 USD and are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and include free shipping throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Static wedge wire screen for pig farm

    Static screen is continue directly filtration system. The raw water evenly inflow to the stainless-steel wedge wire . As the solids are captured on the face of the screen, the solids are dropped into the storage tank by gravity. The screened water will pass through the slots into the bottom. Then the water flow to outlet. The washing system is equipped with nozzle is driven by gear box and washing pump. Applications & Benefits: (a)Meats, foods process Industry (b)Household wastewater (c)Textile Industry (d) Leather industry (e) Electronic industry

    By Enfound Enterprise Co., Ltd. based in Taipei, TAIWAN.

  • Wastewater treatment for the food industry

    Companies in the food industry need large amounts of water – as an ingredient of their products, but also – in large amounts – for the production process and for the cleaning of raw materials, machines and equipment. Water cleans, washes and is processed. Using this essential resource carefully helps to reduce costs. The biological wastewater treatment process by DAS Environmental Expert enables companies to recycle usage water and therefore lower overall consumption.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Diverse Surface Treatment Technologies for Military Industry

    We have developed washing techniques and technologies for the military industry in keeping with high military standards of safety and efficiency, using water jets and the sanding power of aluminum oxide. We are currently creating an anchor profile that will allow us to file a plating patent application for an exclusive, entirely automated surface treatment which prolongs engine life in extreme conditions. At IST Pure, we also manufacture washing tunnels for the complete cleaning of military vehicles and ballistic equipment to prepare for and return from missions.

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Wastewater treatment for the beverage industry

    Enterprises in the beverage industry are facing tough competition. Water consumption is one of the most significant cost factors in the sector, since water is the main ingredient of their products. In addition, bottle washing or cleaning of machines and equipment also requires enormous amounts of clean water. This is why beverage producers need a wastewater treatment system that meets these demands.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • EcoTex laundry systems for correctional facilities

    Pounds of heavy-soiled laundry are washed daily at correctional facilities. Laundry equipment must provide inmates with clean and durable linens and clothing, and must minimize the spread of “superbugs” that can occur in these environments. With limited budgets, federal and state institutions are mandated to use cost effective laundry equipment – which makes an EcoTex Ozone System a perfect choice. EcoTex is an ozone diffusion system that maximizes cold water laundering effectiveness for a 99.999% bacterial kill, including C.diff, Aspergillus Niger, and MRSA, while eliminating up to 90 percent of the hot water you’re now using. Using Ecotex, electricity, water, and gas savings budgets can be virtually cut in half.

    By ClearWater Tech LLC based in San Luis Obispo, CALIFORNIA (USA).

  • Dry bulk material processing for the food industry

    The need for improved sanitation and hygienic cleaning in the manufacturing process of food is growing every year. The FDA and USDA enforce this demand with the strongest focus on food equipment and food processing. Meyer offers a wide range of products ideal for the food processing industry. Our top rated Sanitary Airlock Feeders incorporate multiple modernizations for the food industry. They are specially designed for applications where frequent cleaning, sanitizing or inspection of the bulk handling system is required and minimum downtime is critical. Each Sanitary Airlock Feeder can be manufactured to meet NFPA explosion ratings while being FDA and USDA approved for operations. Additionally, increased accessibility of critical internal components, simplistic cleaning of valve internals eliminating contamination, water resistant exterior for high-pressure washing and quick dis-assembly/re-assembly for minimal downtime are just a few features of our Sanitary Airlock Feeders.

    By Wm. W. Meyer & Sons, Inc. based in Libertyville, ILLINOIS (USA).

  • Welding Fume Extraction

    Welding fumes & gases are Unbreathable. Nonetheless, welding is perhaps the most common industrial process and necessary anytime the joining of metals is required. Regardless of the welding equipment type or technology, the simple process of melting metal and filler materials creates poisonous fumes and gases. ? Different types of welding processes present unique challenges to adequately handle airborne fumes. Robotic welding equipment and other automated welding systems produce a high volume of welding fumes and sparks and need to captured by a heavy duty robotic welding hood. Moreover, manual stick welding typically produces a high volume of smoke and often requires a self-cleaning fume extractor to avoid overwhelming the filters.? Lighter duty applications like MIG welding generally produce less particulate and light-duty TIG welding generates the least amount of smoke. It is important to not only consider the type of welding process but also the work piece material in order to select the correct filtration media for your application. HEPA filters are recommended for stainless steel welding, Nanofiber filters for Aluminum and parts containing higher levels of Manganese. Polyester filters are appropriate where rust inhibitor, lubricants and coatings create an oily smoke as these filters can be washed in water. Diversitech offers a complete line of fume collection machines from compact welding fume extractors to central welding fume filtration systems. We specialize in engineered solutions and our engineering team is experienced in selecting the best equipment and filter media for your particular application. We can present you with detailed technical drawings demonstrating several potential layouts and solutions including costing, installation and start-up expenses. ??

    By Diversitech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you