Our Envirotac line of polymers are the perfect solution for stabilizing any soil related project in the golf industry. Use Envirotac to line bunkers before placing white sand and it`ll create a tough layer of protection that will prevent native soil from contaminating the imported sand. It will outperform traditional methods at a fraction of the cost and is a lot easier to apply. Envirotac will also keep decomposed granite (DG) in place, so when rains hit the DG it will not track onto the course. Great for golf...
Envirotac line of polymers perform exceptionally well in constructing parking areas. Whether it be in-situ soils, road base, gravel, recycled asphalt, or decomposed granite Envirotac will lock the particles in place. It is great at controlling dust, preventing ruts and washboarding , and increasing the surface strength. Carbon black can be added to make the area look like asphalt and stripes can be painted over the surface.
The largest threat to wetlands is the risk of being flooded with sediment as a result of a poorly managed construction site. Most construction projects require erosion control to prevent damage to the wetlands.
Tidal fluctuations and wave action can cause major damage to coastlines and off-shore construction projects. Nonwoven and specialty woven geotextiles can be used as a filter under layer beneath stone/ rock armour. Also riprap or synthetic erosion control mats are used to control erosion by disallowing the sub grade soil particles to erode. The geotextiles prevent erosion carried off by runoff water or other erosive waters, such as waves, stream flow, etc.
Spraying Envirotac on loose soil binds the soil particles and does not let the them be carried into the air, preventing dust pollution, thus reducing dust allergies and other respiratory problems. One application will control dust for over a year at a fraction of the cost being spent maintaining with water.
To prevent dust from giving up the location of Border Patrol vehicles, the Envirotac line of polymers have been utilized. It will not only prevent dust, it will eliminate the constant need to regrade the road by eliminating potholes and wash boarding. This will lower vehicle maintenance and repairs and increase the speeds in which vehicles can travel.
Used on heavy haul roads, Envirotac prevents dust, wear, and erosion. Further, it helps saving water, preventing equipment damage due to dust, preventing loss of tire tread due to road wear and reducing emissions from equipment that would normally be used to maintain the road.
Envirotac line of polymers can be used to make the base for landfills which will not allow the harmful pollutants to seep or leach into the earth. In addition, by spraying Envirotac on top of hazardous materials, it will contain the gases and odor by reducing the PPM, preventing air and water pollution.
Design high-performing, ‘low environmental impact’ GEOWEB channels for stormwater conveyance, as well as for erosion protection of containment facilities. Protect impervious liners in lagoons and detention basins, preventing degradation and contaminant leakage. With the GEOWEB system, channel and basin designs can be customized for each project with vegetation, aggregate or concrete infill, offering more economical solutions than rip-rap, gabions or reinforced concrete systems. The GEOWEB system&rsqu...