Only show results available in Virginia? Ok

excavation system Applications

  • Vacuum excavation solutions for diamond saw slurry

    Concrete Cutting Contractors use our LP555SDT for saw slurry clean‐up. Concrete cutting using a Diamond Saw is the process of cutting expansion joints on freshly paved concrete roads. After cutting, water is used to eliminate dust thereby creating a slurry. This slurry has to be cleaned up due to EPA Regulations and the Vac-Tron vacuum excavator is the preferred clean-up method. Using water to create the slurry and then using the LP Series - Wet/Dry Industrial Vacuum Excavation System to eliminate any residue. Contractors perform this application frequently for airport runways and highway repair, as well as new construction.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Vacuum excavation solutions for car wash pit clean out

    The Vac‐Tron trailer mounted vacuum system is the perfect tool for cleaning out car wash pits. By utilizing the vacuum portion of the system you can remove the oil, grease, chemical slick and garbage debris from the washout pits. Once all the debris is removed, you can utilize the high pressure water wand that offers 4 GPM at 4,000 psi to clean out the structure (i.e., walls, floor of the pits, grate overhead) leaving it clean and free of any build‐up. The Mini‐Combo Model is equipped with a jetter system which offers 15 GPM at 2200 psi. Use of this efficient tool will enable you to clean out the 4” lines that connect the washout pits so as to ensure proper drainage of contaminated water to the holding tank, if applicable.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Vacuum excavation solutions for grain elevators sector

    Vac-Tron - Wet/Dry Industrial Vacuum Excavation System models are used widely in the Grain Industry. Grain Elevators and/or Silo’s are the main focus. The Maintenance Department deals with `Housekeeping`. The Vac-Tron - Wet/Dry Industrial Vacuum Excavation System can be used to clean the bottom of the elevator or to clean up spills. They can also be used to free up a stuck elevator without losing product.

    By Vac-Tron Equipment based in Okahumpka, FLORIDA (USA).

  • Premium

    Online monitoring solutions for the mining industry

    As a primary industry, the mining industry faces the needs for optimizing the management of its resources. Exploration and excavation activities should be as efficient as possible. Companies also aim to maintain water resources while at the same time controlling the environmental impact of their activities. As pioneers in exotic mining analytics, AppliTek can help you with a selection of application-oriented analyzers, from portable XRF systems to on-line analyzers for water and process applications.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Civil engineering applications

    Civil engineering jobs in water are typical for Watermaster Classic. Watermaster is ideal when e.g. embedding cables and pipes in the bottom and it can also do other kinds of maintenance work effectively. The harder the conditions are, the greater Watermaster`s advantages compared to other technologies. The machine moves to the site with its own propulsion system and remote controlled spuds give proper anchorage for steady and efficient excavating work as well as for cable mounting.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Premium

    Industrial pool maintenance

    Maintenance of industrial pools is easily done by utilizing Watermaster`s suction dredging capabilities and independent moving capabilities. It is easy to transport our Watermaster to the site on a trailer and from there the dredger simply `walks` to the pool by itself. At the pool Watermaster moves with its own propulsion system and can also move to another pool by using its excavator assembly and spuds. From the pool the dredger can pump the mass in another pool up to one and a half kilometres away. By backhoe work it can build and repair the pool banks.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Premium

    Amphibious multipurpose dredger for utilizing in construction projects

    The harder the conditions are, the greater the Watermaster`s advantages are.

    Civil engineering jobs in water are typical for Watermaster Classic. Watermaster is ideal when e.g. embedding cables and pipes in the bottom and it can also do other kinds of maintenance work effectively. The machine moves to the site with its own propulsion system and remote controlled spuds give proper anchorage for steady and efficient piling, excavating work as well as for cable mounting.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Premium

    Amphibious multipurpose dredger for maintaining and cleaning industrial ponds

    Maintenance is easily done by utilizing Watermaster`s suction dredging capabilities and independent moving capabilities.

    Watermaster is easy to transport to the site on a trailer and from there the dredger simply walks into the pool by itself. In the pool Watermaster moves with its own propulsion system and can also move to another pool by using its excavator assembly and spuds. It can pump the mass into another pool up to 1,5 kilometres away. By backhoe work it can build and repair the pool banks.

    Watermaster can also recover valuable materials from tailings ponds and drainage ponds.

    By Watermaster - Aquamec Ltd. based in Säkylä, FINLAND.

  • Premium

    Carbon Dioxide Sensing for Controlled Environment Horticulture

    Introduction: Controlled Environment Horticulture is a vast topic, and has been utilised in varying forms for centuries. Excavations of the city of Pompeii showed remains of early greenhouses dating back to AD79; and the modern greenhouses are thought to originate in the thirteenth century in Italy. Most people recognise the use of greenhouses for growing flowers and vegetables, whether in their own garden, at garden centres or on a commercial basis. Indeed most people will be conversant with irrigation systems that are used to supply water to such greenhouses and the use of heaters to control the temperature and thereby extend the growing season.

    By Edinburgh Sensors Ltd based in Livingston, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you