Only show results available in Virginia? Ok

exhauster system Applications

  • Exhaust Gas Emissions

    Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas/vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, & include a range of special sampling, vacuum pumping & vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, & thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization. For thermal analysis including TPD/TPO/TPR studies, Hiden gas analysis systems include enhanced pumping for hydrogen and special close coupled sampling to the TPD/TPO/TPR reactor for optimum thermal analysis response. In Biogas applications the simultaneous analysis of H2S, CO2, water vapour & CH4 in the PPM to 100% concentration range provides vital ininformation for process development and process monitoring...

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Premium

    PTR-TOFMS systems for automotive real-time vehicle exhaust analysis

    Monitoring exhaust gas from combustion engines, emitting a large number of different compounds and with rapidly changing concentrations due to variations in operating conditions, necessitates an instrument that measures in real-time and with high sensitivity – an IONICON PTR-TOFMS.

    By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

  • Premium

    Air cleaning system for the agriculture sector

    High Efficiency odor, VOC and particle filtration without the high costs of energy and maintenance. Dynamic Air Cleaners have been used successfully around the world to remove VOCs, mold spores, and ultrafine particles from indoor air and outdoor ventilation air, and for mitigating odors from exhaust air.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • Premium

    Gas monitoring instruments and systems for semiconductor manufacturing

    In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane C2F6.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for engine emissions measurements

    The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a dynamometer laboratory, or the portable version can be used for roadside tests.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Air cleaning system for the airports sector

    Dynamic Air Cleaners remove dangerous airborne particles that other air cleaning systems miss…including odors, VOCs, smoke, bacteria, allergens, fine dust, molds and pollen…without producing any harmful ozone. Dynamic Air Cleaners can have a significant impact on removing odors from outside air as the air comes through the ventilation system. This feature is very important in airports in the control of jet exhaust fumes that migrate into fresh air intakes.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • PLAZKAT systems for treatment of emissions in the petrochemical industry

    Today, the reduction of atmospheric emissions produced by the gas processing and petrochemical industries is an acute problem. The most widely used technique of exhaust gas treatment comprises complete burning, even though this method does not provide an adequate degree of treatment. Therefore, in this case PLAZKAT systems are a more effective solution for removing aromatic hydrocarbon from the emissions.

    By Plasma Air Systems Corporation based in Harju Maakond, ESTONIA.

  • PLAZKAT systems for treatment of emissions from motor and railroad vehicles

    PLAZKAT Aero systems are used to treat emissions from motor and railroad vehicles. It has been found that exhaust gases from internal combustion engines (ICE) contain over 250 ingredients. Major components include carbon oxides, nitrogen oxides and hydrocarbons.

    By Plasma Air Systems Corporation based in Harju Maakond, ESTONIA.

  • Premium

    Automotive and Industrial Painting

    Reliability. Uptime. Uninterrupted Production - all are essential requirements in painting and finishing applications. Just-in-time manufacturing demands uninterrupted production and smooth pressure control that eliminates pressure fluctuations in the painting and finishing process. MEGTEC has supplied many systems to Tier 1 and Tier 2 automotive plants where high volume, low concentration exhaust streams are treated economically and effectively, yet adaptable to changing finishing formulations.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Wood Products

    MEGTEC is a leader in providing regenerative thermal oxidizers (RTO) for VOC control for products such as OSB, MDF, SYP, plywood, particleboard, wood pelletizing and other engineered wood products, with particular expertise in solving the problems of media plugging and alkali attack associated with wood dryer exhaust. With thousands of systems installed worldwide in many process industries, MEGTEC has the knowledge to provide you with the best solution for your specific needs. MEGTEC’s designs are modular and cleanable, using alkali-resistant ceramics and corrosion-resistant materials of construction.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Air pollution control for ventilation air methane industry

    Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM).  The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG.  As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat.  Landfills and mines represent two of the most abundant sources, however reports indicate that more than 50% of all VAM is exhausted from mine ventilation systems and remains unutilized.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Emission control & air dedusting for steel and ferrous alloys

    teel and ferrous alloys production happens in industrial manufacturing processes which involve high temperature exhaust streams, often at more than 900 ºC. Typically, the gas flows into a gas conditioning tower to cool down to approximately 200 ºC, before entering into an ESP. These flue gases from steel or ferrous alloys kilns are also very maintenance demanding for bag filters and the very small size of the particles limit the use of usual dedusters such as regular cyclones and multicyclones as pre-separators. Bag filter failure is consequently a very common problem for clients in this industry. 

    Client`s needs include a very robust dedusting system, either serving as end-stage collector avoiding the need to cool down flue gases, or strongly minimizing the loads of aggressive material to bag filters. 

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Air pollution control for the soil remediation industry

    Treatment of exhaust gases from systems that process polluted or contaminated soil – commonly use incinerators for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Stack Testing for Power Generation Plants

    POWER GENERATION INDUSTRY: Conducted detailed measurements of volumetric flow, oxygen, and carbon dioxide levels in huge main ducts in the Economizer Outlet, Air Heater Inlet, and Exhaust Stack locations in order to evaluate overall plant and control system performance

    By AirSource Technologies, Inc. based in Shawnee, KANSAS (USA).

  • Waste water plant

    Applications of 254nm amalgam UV lamp Municipal Sewage Water Treatment Urban Drinking Water Treatment Swimming Pool and Spa Water Treatment Ventilating duct and air-conditioning system Applications of 185nm amalgam Lamps with Ozone Kitchen Exhaust Cleaning Urban Drinking Water Treatment TOC Reducing Swimming Pool and Spa Water Treatment High Purity Process Water Disinfection

    By CREATOR UV&IR Lighting CO.,Ltd based in Guangzhou, CHINA.

  • Premium

    Radiation Monitoring for Nuclear Military Sites

    Deterrence is the cornerstone of Defense, reflected in today`s nuclear military vehicles (submarines, aircraft carriers, aircraft, etc.) and sensitive sites. Defense calls on Saphymo`s exhaustive product range to secure its personnel and equipment and shoulder the emergency services in case of a CBRN threat. All military units are required to be fitted out with detection and decontamination devices, and possess the special expertise needed to manage exceptional events. Nuclear military sites must also be equipped with specialist monitoring devices. Dosimetry, survey meters, access control, Radiation Monitoring Systems, environmental monitoring networks and numerous other solutions offer valuable decision-aid tools, providing fast and accurate information and easier situation assessment.

    By Saphymo based in Montigny Le Bretonneux, FRANCE.

  • Premium

    Centrifuges for Industrial Waste Water, Minerals and Oil

    Residues containing oil are created wherever oil is extracted or processed. Flottweg decanters, Tricanter, separators and systems offer an environmentally friendly solution to the following applications in the processing industry: Processing of sand washing water and gravel wash water. Cleaning wastewater and exhaust gases in steelworks. Cleaning and processing of tar in coking plants. Processing of wastewater containing oil. Processing of oil sludge from ponds and lagoons. Processing of residues containing oil from the cleaning of crude oil tanks. Processing of drilling slurry, drilling emulsion and drilling muds. Processing of ore and minerals.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Gas detection analyzers for pollution control

    Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another way.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Emissions testing for engines

    Rich-burn engine exhaust, when uncontrolled, can have wide concentration ranges and both CO and NOX can fluctuate significantly. The on-board CO dilution system will automatically set-up for optimum testing, perfect for a rich burn engine. Lean-burn engines have different exhaust characteristics, but NO2 can make up a significant portion of the total NOX measurement. The 350 measures both NO and NO2 for proper lean-burn engine set-up. Due to high concentration, replaceable interference filters keep the sensors stable and your readings accurate. High exhaust pressures and heavy particulate loading are easily controlled with the special pressure relief valve (standard) on the engine probe configuration.

    By Testo Inc. based in Sparta, NEW JERSEY (USA).

  • Painting & Coating

    Paint fumes are Unbreathable. Spray Painting VOCs and Powder Coating dust are both harmful pollutants which are produced during painting operations. The volatile organic compounds (VOCs) emitted from paint can cause respiratory issues and require proper ventilation to remove harmful gasses from the work area. Powder Coating lines and spray painting produce dangerous fumes and dusts which need to be filtered or exhausted outside your facility. Industrial coatings and chemicals can produce toxic VOCs and foul odors which can effect worker`s health and reduce productivity. Some of the most common coatings are polymers which include polyurethane, epoxy and moisture-cure urethane. Many different industries required the use of glues, adhesives, solvents and different chemical agents in their production process, but are unsure of the best way to handle this nuisance. Exhausting fumes outside may be an option when VOCs are extremely dangerous and odorous but companies must also comply with EPA guidelines which regulate which gases can be emitted. In cold climates and in air-conditioned facilities, capturing, filtering and recirculating fumes can provide huge energy savings preventing costly heat loss and energy intensive air makeup systems. Utilizing activated carbon granules can allow operators to filter VOCs and odors from painting and cutting applications. Different quantities and types of carbon modules are required depending upon the contaminant. Contact Diversitech with an MSDS sheet detailing your chemical`s characteristics for an evaluation of your workplace air quality problem.?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you