Only show results available in Virginia? Ok

exposure level Applications

  • Premium

    Measurement solution for hospital workplace exposure monitoring

    In taking a responsible stance on the exposure of workers to any potentially hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement of ethylene oxide for monitoring workplace exposure limits

    The Series 8900 Ethylene Oxide Analyzer combines the selectivity of gas chromatography with the sensitivity of a Photoionization Detector (PID) providing interference free response to Ethylene Oxide (EtO) at levels below 0.05 ppm. This analytical method is referenced in OSHA`s `Occupational Exposure to Ethylene Oxide: Final Standard` 29 CFR Part 1910. The system documents exposure levels including: time-weighted averages (TWA), short-term exposure limits (STEL) and instantaneous alarms. Areas that are typically monitored include; EtO Sources - gas storage areas, sterilizer doors, aeration doors, and the General Work Area - decontamination, packaging and preparation and sterile product storage areas.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Sound level measurement for safety regulations

    Hand held instruments for the measurement of an employee`s noise exposure. Frequency analysis within Sound Level Meters can also be used to determine the correct selection of hearing protection.

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Noise monitoring for workplaces

    Measurement of the noise exposure of an individual over the working day. They should be used for mobile workforces where it is not always practical to measure with a hand held Sound Level Meter.

    By Casella based in Kempston, UNITED KINGDOM.

  • Premium

    Air quality monitoring for health protection

    Vertical pollution monitoring at different levels of a high rise building can reveal exposure of inhabitants to pollution and inform guidance about ventilation.

    By AQMesh based in Stratford-upon-Avon, UNITED KINGDOM.

  • Premium

    Air sampling & monitoring systems for biomedical, chemical & pharmaceutical industry

    HI-Q Environmental Product Company provides air sampling instrumentation & systems for several niche applications in a number of disciplines in the broad area of `Life Sciences`. In the Biomedical, Chemical, & Pharmaceutical industries, HI-Q has marketed instrumentation for certain applications for many years. Our ambient, in-door breathing level air samplers, commonly known in the industry as `Goose-Neck` or `Giraffe` air samplers have been instrumental in analyzing workplace exposure. HI-Q has also developed accurate pre & post heap filtration stack sampling systems to aid laboratories in inventory control & atmospheric exposure monitoring for chemicals such as Radio Iodine.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Improved Resolution of Mycotoxins from Cereal

    Mycotoxins are a diverse group comprised of hundreds of secondary metabolic products of various fungal species. Several show marked toxicity in humans. Contamination of the food supply with mycotoxins is increasingly prevalent, and can occur during growth, harvest, transportation, processing or storage. Techniques to reduce mycotoxin concentration after contamination are expensive, unreliable and sometimes reversible. Therefore, the removal of contaminated products from the food chain is a primary means of eliminating human exposure. The sensitive and accurate detection of very low levels of these compounds is critical to efforts to identify contaminated products. LC-MS/MS is a popular analytical technique for this purpose. This application explores using Ascentis® Express RP-Amide and Ascentis Express F5 HPLC columns to perform this analysis.

    By Sigma-Aldrich Co., LLC based in Bellefonte, PENNSYLVANIA (USA).

  • Premium

    Mercury monitoring for on-site remediation

    Fugitive emissions can be a health concern during removal and disposal of mercury-contaminated material at remediation sites. Thus, remediation projects either indoors or outdoors often require on-site, real-time mercury air monitoring with a Tekran 2537. This assures permitted levels are not exceeded during waste processing and human exposure levels are below government regulated toxicity thresholds. Often multiple sites must be monitored continuously. The Tekran 1115 Multi-Port Sampler is the ideal tool for multiplexing the Tekran 2537 for real-time continuous on-site monitoring of mercury fugitive emissions. Please contact us for more information on mercury remediation monitoring.

    By Tekran Instruments Corporation based in Knoxville, TENNESSEE (USA).

  • Premium

    Gas Detection Solutions for Sour Gas

    The sour (H2S) content of hydrocarbon fields worldwide is increasing, and many natural gas fields have very high H2S – sometimes in excess of 50%. H2S is extremely dangerous because, although people can smell it at low levels (about 5 ppb) it does not smell much worse at the exposure limit value of 10 ppm or at potentially fatal levels in excess of 100 ppm. Therefore smell is an unreliable means of determining dangerous levels. Existing H2S point sensors are maintenance intensive, slow to respond and provide limited coverage. Most H2S sensors do not work reliably in hot or cold weather, or in humid marine environments.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Gas detection for the winery and brewery Industry

    Once an archetypal example of manual production, the winery and brewery industries now incorporate sophisticated processes to ensure high quality levels and efficient output. In some cases traditional approaches have simply been scaled up or put under more stringent monitoring, whilst in others innovations such as nitrogen-pressurised canning have been introduced. However, whichever approach has been followed there is also a growing realisation of the gas hazards that are associated with both new and old processes, and the need to protect workers from toxic gas exposure and asphyxiation risks.

    By Crowcon Detection Instruments Ltd - a Halma company based in Milton Park, UNITED KINGDOM.

  • Pollutant monitoring for the manufacturing industries

    Ormantine`s air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range. Ormantine USA`s many solutions have applications from personal exposure monitoring to long term fence line monitoring studies.

    By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

  • Noise and vibration problem solutions for local authorities and government

    The increase in housing stock required by the government is leading to developments being considered in a wider variety of locations and can provide challenges in assessing and agreeing levels of acceptable noise and vibration exposure. With the introduction of the National Planning Policy Framework (NPPF) and the Noise Policy statement for England (NPSE) clients are faced with rapidly changing local authority requirements.

    By Acoustic Associates Sussex Ltd based in Shoreham Airport, UNITED KINGDOM.

  • Site and Risk Assessments, Risk Management and Remdial Solutions

    No matter what the size of the project is, we service residential, commercial, industrial, local, state and federal agency clients, conducting environmental site assessments, deterministic and probabilistic risk characterizations and Indoor Air Forensic Investigations to evaluate the impact of exposures to hazardous chemicals and radio-logical materials on human health, public welfare, safety and the environment in MA, NY, CT, RI, NH, CO, and the Virgin Islands. Projects undertaken comply with Federal CERCLA/SARA, TSCA, RCRA, RBCA, Brownfields, NRC, DOD and DOE regulations and/or programs, and at the state level: Massachusetts Contingency Plan (MCP), Connecticut Department of Energy & Environmental Protection (CTDEEP) Remedial Standards, New Hampshire Department of Environmental Services (DES), New York (NYSDEC), New Jersey, Maryland, Rhode Island and other state programs, using innovative approaches to develop site-specific risk-based cleanup strategies and

    By Risk Management Incorporated based in Acton, MASSACHUSETTS (USA).

  • Low frequency noise analysis using XL2

    The Data Explorer PC software for the XL2 Sound Level Meter now includes a series of professional tools for detailed analysis of low-frequency noise (LFN). The graphical representation of time varying frequency components offers an efficient process for identifying the presence and level of LFN. Also the associated high quality audio recording supports further correlation with the objective measurement data. The new features are particularly useful in the calculation of immission levels which is defined as the cumulative noise energy to which an individual is exposed over time. Exposure to low-frequency noise over extended periods can lead to a range of health problems including cardio vascular disease, insomnia and depression. The sources of low frequency noise can often be attributed to electricity sub stations, chiller plants and incinerators with continuous noise at frequencies below 200 Hz. XL2 Sound Level Meter records all Data Measuring LFN requires a class 1 sound level meter

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • Laser & Plasma Cutting

    Laser & Plasma Cutting fumes are Unbreathable. Using laser or plasma cutting equipment on either metals or plastics introduces several known carcinogens, such as fused silica and ethyl acrylate, into the air. Occupational Health and Safety organizations recommend reducing personal exposure to the lowest level feasible. Hand held plasma cutting provides metalworkers with a quick and fast way to cut large sheets of metal material. However, plasma and oxy cutting generate a large amount of sparks, slag and fume which can contain different pollutants depending on the type of material being cut. Diversitech's line of downdraft tables incorporating the plasma cutting kit are designed to extinguish the sparks and slag, using heavy duty steel bar grating and a gravel filled baffle tray while the blower pulls away all of the toxic plasma cutting fumes. When considering how to capture and filter the fumes generated from large CNC plasma cutting and laser cutting machines, a large central dust

    By DiversiTech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you