Only show results in Virginia? Ok

exposure testing Applications

  • Measurement solution for hospital workplace exposure monitoring

    In taking a responsible stance on the exposure of workers to any potentially hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    Measurement of methyl bromide in ambient air for monitoring workplace exposure limits in fumigation facilities

    The Series 8900 Methyl Bromide Monitoring System provides an automated, direct measurement of Methyl Bromide in ambient air. This instrument can meet and exceed the requirements for ambient methyl bromide monitoring. It is utilized in fumigation facilities and industrial plants to detect potential worker exposure to methyl bromide, resulting from mechanical failure, human error or product off gassing. Multipoint sampling options allow the analyzer to monitor multiple sample locations for greater coverage.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Measurement of formaldehyde in ambient air for monitoring workplace exposure limits

    The Series 8900 Formaldehyde Analyzer provides direct measurement of Formaldehyde in ambient air. This instrument is utilized in industrial plants to monitor workplace exposure limits. The Series 8900 Formaldehyde Analyzer employs a flame ionization detector (FID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Formaldehyde and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. Formaldehyde is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Measurement of acrylonitrile in ambient air for monitoring workplace exposure limits

    The Series 8900 Acrylonitrile Analyzer provides direct measurement of Acrylonitrile in ambient air. This instrument is utilized in industrial plants to monitor workplace exposure limits. The Series 8900 Acrylonitrile Analyzer employs a flame ionization detector (FID) as the sensing element. A dual column configuration with timed backflush to vent is used to strip off moisture and heavier hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed volume of sample is carried to the pre-cut column. Backflush is timed so that only the Acrylonitrile and other similar components are eluted to the analytical column. Contaminants on the pre-cut column are backflushed to vent. Acrylonitrile is separated from potentially interfering components on the analytical column and elute to the detector for analysis.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Noise monitoring solutions for urban noise

    The sounds in a city are central to our quality of life. Constant exposure to noise effects both our physical and psychological health, and our ability to learn and communicate.

  • Pulsar noise testing equipment for construction industry

    The construction sector and its wide range of associated activities are very varied and from a noise monitoring perspective offer many unique challenges. However, Pulsar Instruments have a solution; a construction Pulsar noise meter with the ability to effectively assess the following two key categories; Noise at Work (potential for noise induced hearing loss due to long term exposure to noisy activities). Environmental Noise (the potential to cause annoyance to surrounding areas or buildings during site work).

    By Pulsar Instruments plc based in Filey, UNITED KINGDOM.

  • Premium

    Mercury monitoring for measuring mercury content in hair

    Measurement of mercury content in hair is a convenient technique to estimate dietary exposure without having to handle tissues or bodily fluids. As the mercury present in hair is comprised of different mercury species, full speciation of the compounds is needed for complete understanding. Environment Canada published a technique where treating a basic digestion with Cd2+ in the presence of cysteine allowed analysis of inorganic mercury and total mercury using a Tekran 2600 System. Methyl mercury was then calculated by difference. Tekran has over 18 application notes available for Tekran 2600 users.

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

  • HCl Monitoring in Air

    Hydrogen chloride (HCl) is a colorless, sometimes slightly yellow, gas. It is an undesired environmental component that may be damaging to workers and the surroundings. Exposure limits have thus been established by industries to make sure that the workers operate in a safe environment. HCl monitoring is especially required for incinerators, coal-fired power plants, aluminum recycling and cement plants. Unisearch offers a reliable and easy-to-use HCl analyzer – the TDLAS-based LasIR system. Studies have shown that TDLAS equipment provides data that is more accurate than conventional gas monitoring equipment. When calibrated for HCl monitoring, TDLAS is able to detect this gas among other gases present in the area and provide continuous updates with regards to the changes in its concentration.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Low frequency noise analysis using XL2

    The Data Explorer PC software for the XL2 Sound Level Meter now includes a series of professional tools for detailed analysis of low-frequency noise (LFN). The graphical representation of time varying frequency components offers an efficient process for identifying the presence and level of LFN. Also the associated high quality audio recording supports further correlation with the objective measurement data. The new features are particularly useful in the calculation of immission levels which is defined as the cumulative noise energy to which an individual is exposed over time. Exposure to low-frequency noise over extended periods can lead to a range of health problems including cardio vascular disease, insomnia and depression. The sources of low frequency noise can often be attributed to electricity sub stations, chiller plants and incinerators with continuous noise at frequencies below 200 Hz. XL2 Sound Level Meter records all Data Measuring LFN requires a class 1 sound level meter

    By NTi Audio AG based in Schaan, LIECHTENSTEIN.

  • Gas analysis & monitoring systems for medical gases monitoring

    The measurement of occupational exposure to pollutants in the operating room is an essential tool for the detection of chemical, linked not only to the occurrence of infections and various diseases, but also to reduced alertness and performance of staff. To meet the above requirements, ETG proposes the use of ‘INFRARUN, thanks to the high sensitivity and stability and the very wide dynamic range, INFRARUN is the ideal tool to make a continuous sampling in the short and long-term gaseous contaminants in the field hospital, such as volatile anesthetics, aldehydes, fluorani, isofluorani,, VOC’s, etc.

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    Gas monitoring instruments and systems for flavoring agents

    Manufacturing of powdered and liquid flavorings and fragrances involves production phases where flavoring chemicals may be released into the ambient air breathed by workers. Exposure control by gas analyzers in the production rooms and laboratories is necessary to ensure that the Time-Weighted Average (TWA) concentrations do not exceed the maximum Permissible Emission Limit (PEL) values.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Ambient Stations for Ambient Air Quality Monitoring

    Ambient air monitoring involves the measurement of `representative` air in urban, industrial and rural areas. These measurements are used to determine the human exposure to pollutants and can be combined with trace/background monitoring.

    By Opsis AB based in Furulund, SWEDEN.

  • Measurement solution for medical workplace monitoring

    In taking a responsible stance on the exposure of workers to any potential hazardous gases, there is a need for workplaces using anaesthetic gases, such as hospital operating rooms or research laboratories, to control the level of waste anaesthetic gas in the ambient air. Anaesthesia machines, ventilators, breathing systems and waste gas scavenging systems will all contribute to te background level of he anaesthetic gases that are present in the environment within a facility, whether those machines are in a good state of repair or not. Recovery rooms can become polluted, for example from gas exhaled by the patient, and clean-up from any spills can remain in the background air for long periods.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Controlled Atmosphere Glove Boxes and Nitrogen Dry Boxes for Process Industry

    Glove boxes are designed for handling both hazardous substances and atmosphere sensitive materials. For controlled atmospheres, nitrogen dry boxes provide an isolated work environment for processing samples or handling air-sensitive materials while maintaining an anaerobic or other gas specific environment within the glove box. For work with hazardous materials, glove boxes provide a leak-tight environment protecting the user from exposure to potentially dangerous materials. Glove box applications include; anaerobic testing, biological research, catalyst research, hazard material contamination and pharmaceutical packaging.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you