Only show results available in Virginia? Ok

field gas Applications

  • Premium

    Portable and fixed gas analysers for landfill gas field management

    Careful management of the many boreholes across a landfill gas field can optimise the gas yield and therefore the power generated from the gas.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Remedial Construction for Former Oil Field Production Sites

    - Remediation of 600 former production or release sites transecting four counties - Treatment of over 500,000 cubic yards of petroleum impacted soils from the various site areas in an 8-acre bioremediation landfarm - Remediated soils are then re-used as backfill throughout the disturbed areas

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Premium

    Gas Detection Solutions for Sour Gas

    The sour (H2S) content of hydrocarbon fields worldwide is increasing, and many natural gas fields have very high H2S – sometimes in excess of 50%. H2S is extremely dangerous because, although people can smell it at low levels (about 5 ppb) it does not smell much worse at the exposure limit value of 10 ppm or at potentially fatal levels in excess of 100 ppm. Therefore smell is an unreliable means of determining dangerous levels. Existing H2S point sensors are maintenance intensive, slow to respond and provide limited coverage. Most H2S sensors do not work reliably in hot or cold weather, or in humid marine environments.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Aquatech Water Management Solutions for Unconventional Gas

    Managing produced water from shale gas wells is challenging and requires a variety of solutions & services. Aquatech offers mobile and/or central facility solutions that provide customers to suit their needs. The demands of field operations on equipment and personnel require a high level of continued dedication, experience, & engineering. Aquatech delivers reliability on all of these fronts to ensure that water management & treatment enable gas production to proceed rapidly and efficiently. Our solutions ensure a consistent water composition, with minimal contamination. This enables predictable production characteristics such as consistent hydro fracturing and minimal down-hole scaling. Most import, Aquatech offers sustainable solutions that are friendly to the environment and to the gas producer. The industry needs treatment standards to exceed current and future regulatory requirements. Our commitment to sustainability sets a standard way beyond what many believe is possible today.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Water treatment research for oil and gas industry

    The upstream oil and gas industry is increasingly becoming a water management industry. Globally, three barrels of water is extracted for every one barrel of oil produced. With effective management, this produced water can become a source of value, as disposal options become limited and environmental regulations tighten. New water treatment technologies will allow this water to be reused in waterflooding, enhanced oil recovery and hydraulic fracturing operations, in a market worth $5.2 billion in 2014. Managing the water used and extracted from unconventional resources, such as shale gas, tight oil, coalbed methane, heavy oil, and oil from ultra-deepwater offshore fields, will be a fast growing segment of this market. This section shows you in detail the different opportunities and strategies for these resources.

    By Global Water Intelligence (GWI) based in Oxford, UNITED KINGDOM.

  • Flaring Solutions for the Upstream Oil & Gas Industry - Oil & Gas Production (Enclosed Combustors)

    The EPA mandates that all upstream oil and gas operators install factory-certified combustors that meet new Quad O compliance standards, or perform field testing on the flare system post-installation. ABUTEC offers the only compliance-ready combustors available to the market, making expensive testing no longer necessary for our customers. The use of enclosed combustors is an integral piece of the extraction process and affords companies the opportunity to operate in extreme conditions while still maintaining low emissions and following Quad O regulations.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the Upstream Oil & Gas Industry - Oil & Gas Produced Water

    Because of the huge increase in U.S. natural gas production, there is elevated concern over the production of water that occurs in natural gas and oil fields. These concerns have led to additional state and federal regulations for low emission combustion technology and how companies will deal with produced water. ABUTEC’s high temperature enclosed combustors meet state and federal regulations for burning waste gas at a minimum of 99% destruction and removal efficiency (DRE), meaning almost 100 percent of the vapor to be destroyed is converted to CO2 and water. These combustors are of high quality, flexibility, low emissions, CSA-approved and able to burn very low calorific gas. Additionally, when combined with a heat exchanger, the unit can evaporate the excess produced water eliminating the need for expensive trucking or disposal.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the Upstream Oil & Gas Industry - Tank Batteries/Storage Tanks

    The EPA mandates that all upstream oil and gas operators install factory-certified combustors that meet new Quad O compliance standards, or perform field testing on the flare system post-installation. ABUTEC offers the only compliance-ready combustors available to the market, making expensive testing no longer necessary for our customers. The use of enclosed combustors is an integral piece of the extraction process and affords companies the opportunity to operate in extreme conditions while still maintaining low emissions and following Quad O regulations.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Premium

    Measurement solution for soil chamber gas flux

    Closed chamber gas flux measurements can be made with Protea FTIR analysers to allow researchers in the field of atmospheric gas analysis from agricultural and livestock to measure evolved gases such as N2O, CO2, CO, NH3, and CH4. Nitrous oxide (N2O) and Methane (CH4) emissions from soil, plant and livestock are especially important gases to measure, given their high potential as greenhouse gases (GHGs). NH3, whilst not a greenhouse gas on the scale of N2O, CH4 and CO2, is a major emission from agricultural, such as after the spreading of liquid manure, and steps are required to measure and reduce the NH3 emissions and the effects they have on the ecosystem.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Data analysis and visualization tools for petroleum exploration

    The oil and gas industries face the daunting challenge of finding new reservoirs while balancing increasing costs and limited available sources.  EnterVol for ArcGIS is the answer to this challenge. Field data in oil and gas exploration can be transformed into 3D volumetric models that ease interpretation and analysis. Leading to better informed decisions and decreased costs.

    By C Tech Development Corporation based in Henderson, NEVADA (USA).

  • Integrated real-time gas analysis solution for emissions industry

    Pollutant emissions from industrial smoke stacks are a major national concern due to both health concerns and climate change. As a consequence, there are at least tens of gas analyzer manufacturers in the U.S. alone that compete in that market and have done so for years. What CIC Photonics brings to that competitive field is its expertise derived from its Combustion Efficiency Solution and its high performance IRGAS Systems. The IRGAS-CEM provides real-time and simultaneous measurements of the multitude of toxic combustion products, including CO, CO2, NOx, SOx, CH4, CxHy, H2S, etc. The EP-IRGAS-SPA is also applicable for fast time responses.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Premium

    Gas analysis & monitoring system for medical gases monitoring

    The measurement of occupational exposure to pollutants in the operating room is an essential tool for the detection of chemical, linked not only to the occurrence of infections and various diseases, but also to reduced alertness and performance of staff. To meet the above requirements, ETG proposes the use of ‘INFRARUN, thanks to the high sensitivity and stability and the very wide dynamic range, INFRARUN is the ideal tool to make a continuous sampling in the short and long-term gaseous contaminants in the field hospital, such as volatile anesthetics, aldehydes, fluorani, isofluorani,, VOC’s, etc.

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    Biogas Monitoring for the Renewable Energy Industry

    AppliTek`s solutions in this field concentrate on the process efficiency of anaerobic digesters. Many existing digesters give unnecessary problems, which arise due to inadequacies in the process or process control system. AppliTek has developed a unique instrument to measure and control the key processes in the anaerobic fermentation. Compact gas analyzers with proprietary technology can be implemented to check the biogas yield.

    Parameters: Volatile Fatty Acids - Alkalinity - pH - Bicarbonate

    Gas parameters: CH4 - CO2 - O2 - H2S

    By AppliTek NV based in Nazareth, BELGIUM.

  • Air Quality Monitoring Equipment for Sample Handling Industry

    Within the field of gas analysis much time is spent looking at the accuracy and uncertainty in the detection technique. However, without appropriate sample handling, what you are measuring could potentially bear little or no relation to your original sample.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Environmental technology for water treatment industry

    In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification.  Further applications are: Diluting and conveying acids and lye during the process of regenerating ion exchangers.

    By K├Ârting Hannover AG based in Hannover, GERMANY.

  • Premium

    Oil in Water Analysis for Flowback or Produced Water

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote lab results can take several days to a week. InfraCal TOG/TPH Analyzers allow for oil in water testing at the well site in less than 10 minutes. The sampling requires a few simple steps that can be performed by non-technical personnel. The water is mixed with the extraction solvent, shaken, and then presented to the analyze for measurement. The same InfraCal TOG/TPH Analyzer can be used for TPH in soil if a spill or pond leak occurs to determine the contaminated area. The analyzer features: -Results in under 15 minutes -Detect levels as low as 10 ppm -Portable, rugged, lightweight, easy-to-use -Battery operable -Ideal for field or lab use

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you