Only show results in Texas? Ok

filter membrane Applications

  • Premium

    Ambient air quality monitoring solutions for PM2.5/PM10 particulate monitoring

    OPSIS provides real-time, flexible monitoring of particulate matter in the ambient air. Particulate matter monitoring with OPSIS, is a cost-effective solution, is ideally suited for use in modern monitoring stations. It can be remote controlled and includes automatic calibration, features that frees time. The SM200 meets the new regulation for automatic monitoring of PM10 and PM2.5. It also meets the new regulation for particulate matter sampling on filter membranes for further analysis of cadmium, nickel, PAH...

    By Opsis AB based in Furulund, SWEDEN.

  • Specialty Cleaners and Lubricants for Electronics Industry

    Our cleaners are used in the manufacture of semiconductors, flat panel displays, CDs, DVDs, and many other electronic items. They remove emulsions, particulates, oil, organic and inorganic contaminants from quartz, wafers, glass, silicon, ceramics, and metals. When rinsed properly our products leave absolutely no residue. They are also proven in removing soils from filter membranes used in wastewater treatment systems.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Specialty Cleaners and Lubricants for Filter Membrane Industry

    International Products Corporation has been selling cleaners to the filter membrane industry for over 30 years. Our proprietary formulated cleaners work effectively at restoring 100% flux at safe pH ranges. We have a wide variety of chemistries available for all membranes and soils and an on-site R&D laboratory that offers technical support and assistance. All of our cleaners are free of solvents, phosphates, silicates, phenols, and Substances of Very High Concern.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Cleaners for Oil & gas industry

    IPC’s cleaners are used throughout the oil and gas industry for cleaning equipment and filter membranes. They are excellent alternatives to hazardous, solvent based degreasers. Our cleaners remove oils and greases, sludge, mud, cutting fluids, flux, and petroleum residues. Clean equipment helps to ensure that operations run smoothly and efficiently.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Cleaners for industrial Manufacturing industry

    We understand how critical it is to get the industrial cleaning done so your plant can continue operating at peak efficiency. Our cleaners remove dirt, grease, oil, metal fines, flux, and other particulates from stamped metal, parts and equipment without the hazards associated with solvents. Our cleaners are also proven in removing soils from filter membranes used in wastewater treatment systems.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Liquid/solid separation equipment for filtration

    Filters come in all shapes, sizes, and configurations. WesTech will help you select the right filter. This might include a cluster filter with self-generating backwash, packaged steel tank filters, pressure filters, or even a membrane filter. Selecting filter internals such as underdrains, washtroughs, and media is just as important, and WesTech has more options and expertise than anyone else in the market.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Cleaners for Food and beverage industry

    IPC offers a full line of precision cleaners that provide consistent results with every use and leave surfaces completely clean. An economical 1-2% concentration in water is effective in most cleaning applications. Typical uses include removing protein, starch, grease, fat, gum, oil and baked on soil from processing equipment, lines, and filter membranes.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Ceramic membranes and pressure vessels for food industry

    In the food and beverages industry, ceramic membranes made by atech innovations gmbh are used for filtering or clarifying beverages such as beer, wine and fruit juices, and for fractionating milk proteins.

    By atech innovations gmbh based in Gladbeck, GERMANY.

  • Cleaners for Metalworking industry

    Effective cleaning of machined or formed parts is a key step in all manufacturing processes. At IPC, we understand for a surface to be successfully plated or painted, it must first be free of contaminants. Our cleaners remove dirt, cutting oil, metal fines, flux, and other particulates from stamped metal and precision parts without the hazards associated with solvents. An economical 1-2% concentration in water is effective for most cleaning applications. Our cleaners are also proven in removing soils from filter...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Cleaners for Pharmaceuticals & biotechnology industry

    Our precision cleaners provide consistent results with every use and leave surfaces completely clean. They have been proven effective in critical cleaning applications including mixing tanks, tablet presses, fluid lines, batch process tanks, filter membranes, and other equipment. An economical 1-2% concentration in water is effective in removing gels, emulsifiers, oils, titanium dioxides, dyes, silicons, fragrances, petrolatum, paraffins, insoluble salts, oxides, blood and proteins.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Specialty Cleaners and Lubricants for Food & Beverage Industry

    Our precision cleaners provide consistent results with every use and leave surfaces completely clean. They have been proven in cleaning applications ranging from mixing tanks, processing equipment and fluid lines to labware, general maintenance, and filter membrane cleaning. Our products remove protein, starch, fat, gum, oil, grease, and baked on soils. All of our cleaners are NSF registered, USDA-A1 cleaners and can be validated in FDA cleaning processes. Validation methods and health and safety data are available...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Ultraviolet disinfection systems for the well injection water & SRB reduction

    Microorganism and bacteria control is increasingly an important topic of discussion in the oil and gas industry. Inadequate disinfection and treatment of well injection water and stimulation fluids, used in the recovery of oil and gas has been proven to lead to a host of negative consequences, including: - Souring the well with hydrogen sulphide gas H2S, Microbiological induced corrosion, Loss of fluid stability during injection., Plugging of the well, Damage of equipment and components (e.g. RO membranes,...

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Membrane filter press for palm oil

    Membrane press filter is composed of diaphragm plates and van plates. The feeding pump press the slurry to enter the filter chamber.When the filter material become after filter cake through the filter cloth.Then gas will be guided into septum,giving enough pressure to solid and lowering its water content.

    By Henan Jincheng Filter Equipment Co., Ltd. based in Cangzhou City, CHINA.

  • Ceramic membrane filter

    Nanjing Tangent Fluid Technology Co., Ltd, a high-tech company for liquid separation in process industry, has cooperations with domestic institutes and European famous membrane companies for membrane technology.Tangent Fluid has a manuafaturing plant and R&D center in Nanjing, where we can design and manufacture filtration equipments of Microfiltration/Ultrafiltration/ Nanofiltration /Reverse Osmosis, and make research and development for new process and technology based on membrane process. Tangent Fluid has...

    By Nanjing Tangent Fluid Technology Co., Ltd. based in Nanjing, CHINA.

  • Cleaners for Parts cleaning industry

    We understand how critical it is to get the industrial cleaning done so your plant can continue operating at peak efficiency. Our cleaners remove dirt, grease, oil, metal fines, flux, and other particulates from parts and equipment without the hazards associated with solvents. When rinsed properly our cleaners leave no residue and your precision parts are ready for further processing. Products are available for manual and automated cleaning systems. only qualitative production for all transportAn economical 1-2%...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Flue gas heavy metals on-line continuous monitoring solutions

    According to US EPA IO - 3.3 standard method of heavy metals, flue gas heavy metals analyzer uses XRF nondestructive testing technology and flue gas automatic enrichment technology to realize the accurate measurement of flue gas heavy metals such as waste incineration plants, cement plants, thermal power plants, etc.

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Atmospheric heavy metal on-line monitoring solutions

    According to US EPA IO - 3.3 standard method of heavy metals, PMMS – 5000 uses XRF nondestructive testing technology and atmospheric automatic enrichment technology to realize the accurate measurement of atmosphere heavy metals such as lead, mercury, cadmium, chromium, arsenic, etc. It is widely used in environmental air quality monitoring places such as industrial pollution area, residential area, city, etc.

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Filtration Solutions for Chemical & Pharmaceutical Applications

    Mantec’s extensive range of products and is well positioned to help Pharmaceutical and Chemical customers in all stages of development and manufacturing optimization. Our membrane separation technology and heavy duty, chemically resistant ceramic filters offer effective solutions for arduous process conditions.

    By Mantec Filtration based in Stoke-on-Trent, UNITED KINGDOM.

  • Advanced resource recovery & purification solutions for Water Treatment industry

    Eco-Tec specializes in integrating water treatment components to provide the highest purity water in a simple, reliable package. Based on target specifications and centred around the proprietary Recoflo ion exchange technology; Eco-Tec offers water treatment systems that can be composed of spectrum media filters, demineralizers, reverse osmosis membrane systems and condensate polishers.

    By Eco-Tec Inc. based in Pickering, ONTARIO (CANADA).

  • Premium

    Water Treatment Solutions for Turbidity Removal

    Turbidity is a measure of the loss of light transmittance through a liquid due to suspended particles. The more particles in the water, the murkier it looks or the higher the turbidity. This is a measure of the quality of the water. It is measured in units called Nephelometric Turbidity Units (NTU). Turbidity can be caused by run off after a heavy rain as erosion washes soil into a river or lake. It is often increased in the spring and fall when the water temperature at different levels in a lake change causing a...

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you