Only show results in Virginia? Ok

filtration equipment Applications

  • Filtration in waste water treatments. disinfection

    The cost and efficiency of the waste water treatment is directly linked to the amount of suspended solids in the water.
    The addition of an AZUD System allows:

    • Increased efficiency of the treatment equipment.
    • Decreases the quantity of chemicals used.
    • Avoids the “shadowing effect” created by larger particles in UV disinfection systems.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Cooling systems for filtration

    The installation of AZUD filtration equipments allows the reduction of the total solids in suspension in the water, and:

    • Helps to maintain an optimal efficiency of energy in the heat interchange process.
    • Reduce the accumulation of particles in the components of the cooling systems.
    • Reduce the growing of microorganisms. The higher or lower proliferation of these microorganisms is directly linked to the
    • higher or lower availability of organic nutrients which favour the development of the same.
    • When reducing the total quantity of suspended solids it is improved the efficiency in the application of chemical products to the treatment of water.
    • Decrease the frequency of maintenance labours.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Industrial Meshes for Fluidization

    Pneumatic conveyors lines for conveying media in powder form are equipped with fluidization media made of GEKUPLATE wire mesh laminates. SolidWEAVE stainless steel media satisfy all the requirements which are critical for fluidization.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Water filtration systems for golf courses field

    Azud develops an special filtration equipment with a favourable response in the main golf complexes in Spain. It is an automatic system that supports a higher pressure (PN 16 bar) and that protects efficiently the microirrigation and sprinkling system, avoiding the clogging of the drippers, and the wearing or block of the nozzles, obtaining therefore, the uniformity of the irrigation.

    By Sistema Azud, S.A. based in Alcantarilla, SPAIN.

  • Premium

    Air filtration and gas purification solutions for protekfruit home

    Applied to domestic refrigeration, Bioconservacion’s technology increases the shelf-life of fruit and vegetables, providing benefits to equipment manufacturers and consumers. As they mature, fruit and vegetables naturally produce ethylene. Ethylene accelerates maturation which is why systems that eliminate ethylene, VOCs and fungus spores from the environment are especially beneficial, as they lengthen the useful life of fruit and vegetables increasing shelf life by up to 25%.

    By Bioconservacion SA based in Barcelona, SPAIN.

  • Premium

    Air filtration and gas purification solutions for industries

    Within the industrial sector there are specific installations which should pay maximum attention to the protection of their control rooms against corrosion. This is because their activities generate highly corrosive gasses which need to be eliminated in case they affect the functioning of critical electrical equipment. This corrosion compromises the efficiency and safety and can affect the production process itself.

    By Bioconservacion SA based in Barcelona, SPAIN.

  • Filtration systems & solutions for aerospace & defence industry

    Effective filtration within aircraft and military equipment, to ensure all systems are free from contaminants, to guarantee safety, long service life, reliability and cost effective operation in the most demanding situations.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

  • Demister manufacturer

    Global supplier and manufacturer of Separation Technologies, Process equipment, Mass Transfer and Filtration systems.

    By Euromesh BV based in Sliedrecht, NETHERLANDS.

  • Premium

    Water Treatment in Soil and Groundwater Contamination

    Several industries and industrial processes may contribute to soil and groundwater contamination. AdEdge Technologies has supplied filtration equipment for several remediation efforts to remove arsenic, lead, and other inorganic contaminants to meet state and federal mandates.

    By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

  • Solvent Recyclers and Cleaners for the Construction Industry

    We design solvent recyclers and washers to clean and maintain tools and filtration equipment used for the maintenance and construction of bridges, buildings, antennas, turbines and other structures requiring regular cleaning. Establish a new corporate image, clean old traces left by time or add new protective covering to a surface – whatever your need, we offer a complete range of equipment that gets the job done easily and effectively.

    By International Surface Technologies based in Laval, QUEBEC (CANADA).

  • Ceramic membrane filter

    Nanjing Tangent Fluid Technology Co., Ltd, a high-tech company for liquid separation in process industry, has cooperations with domestic institutes and European famous membrane companies for membrane technology.Tangent Fluid has a manuafaturing plant and R&D center in Nanjing, where we can design and manufacture filtration equipments of Microfiltration/Ultrafiltration/ Nanofiltration /Reverse Osmosis, and make research and development for new process and technology based on membrane process. Tangent Fluid has also invested to another modern producing plant in Shanghai for ceramic membranes production,with a whole set of equipment like Vacuum Pugmill, Extruder, Oven, Full Automatic High Temperature Furnace, and Testing Machines. All raw material is high quality from domestic and abroad porus ceramic membrane filter with first grade quality could be manufactured under our unique technic and strict quality control system.

    By Nanjing Tangent Fluid Technology Co., Ltd. based in Nanjing, CHINA.

  • Solutions for industrial wastewater treatment sector

    Our industrial wastewater treatment services are used by companies in a variety of industries, and our reputation as a go-to company for wastewater treatment continues to grow. We offer affordable and efficient water filtration services, and as a manufacturer and wastewater equipment supplier of water purification equipment we’ll provide the options that work best for iron and manganese removal, arsenic removal and all your individual needs. Industrial, manufacturing, mining, semi conductor and petroleum companies represent just a few of the industries we help, and our clients include those who need city/municipal water treatment as well.

    By Filtronics, Incorporated based in Anaheim, CALIFORNIA (USA).

  • Oil Mist and VOC Collection

    Oil Mist is Unbreathable. Oil based cutting fluids are often used in CNC milling, machining and metalworking. During production, these processes can produce a mist that can threaten sensitive electronic circuitry and presents serious physical risks to employees (accidents from slipping, breathing hazards).? What are the risks in a workshop with oil mist? Exposure to oil mist for a prolonged period of time can cause a number of health issues. Dermatitis Eye, nose and throat irritation Damage to the respiratory system Bronchitis Bronchial asthma Chronic cough Slip hazards (falling, dropping of tools/materials)? How can you protect yourself?? Mist collectors are effective at capturing and filtering harmful oil mist pollution. They can either be installed on individual machines or to a central location. Having the correct oil mist filtration equipment installed will protect your employees from unnecessary health risks. In addition to this, it will also help to protect your business from long term liability and healthcare costs related to workplace air contamination.?

    By DiversiTech Inc based in Montreal, QUEBEC (CANADA).

  • Welding Fume Extraction

    Welding fumes & gases are Unbreathable. Nonetheless, welding is perhaps the most common industrial process and necessary anytime the joining of metals is required. Regardless of the welding equipment type or technology, the simple process of melting metal and filler materials creates poisonous fumes and gases. ? Different types of welding processes present unique challenges to adequately handle airborne fumes. Robotic welding equipment and other automated welding systems produce a high volume of welding fumes and sparks and need to captured by a heavy duty robotic welding hood. Moreover, manual stick welding typically produces a high volume of smoke and often requires a self-cleaning fume extractor to avoid overwhelming the filters.? Lighter duty applications like MIG welding generally produce less particulate and light-duty TIG welding generates the least amount of smoke. It is important to not only consider the type of welding process but also the work piece material in order to select the correct filtration media for your application. HEPA filters are recommended for stainless steel welding, Nanofiber filters for Aluminum and parts containing higher levels of Manganese. Polyester filters are appropriate where rust inhibitor, lubricants and coatings create an oily smoke as these filters can be washed in water. Diversitech offers a complete line of fume collection machines from compact welding fume extractors to central welding fume filtration systems. We specialize in engineered solutions and our engineering team is experienced in selecting the best equipment and filter media for your particular application. We can present you with detailed technical drawings demonstrating several potential layouts and solutions including costing, installation and start-up expenses. ??

    By DiversiTech Inc based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you