Only show results available in Virginia? Ok

fixed gas Applications

  • Premium

    Portable and fixed gas analysers for gas flaring

    Methane is a powerful greenhouse gas and should be destroyed before it enters the atmosphere. Flaring is a common solution for gas with CH4 10% - 40%.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Portable and fixed gas analysers for agricultural waste AD (large scale)

    Large agricultural processors install AD plant to generate revenue and dispose of biodegradable waste, which is usually a single type.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Portable and fixed gas analysers for biogas upgrading

    Biogas with 60% CH4 can be upgraded using various techniques. Upgraded biogas may be packaged for transport use, injected into a distribution network or piped off site.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Portable and fixed gas analysers for remediation and groundwater

    Contamination can arise from circumstances such as fuel spills and plant leaks. Geotech has developed a range of equipment to help you comply with each stage of the remediation process.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Portable and fixed gas analysers for AD research

    Many universities, government departments and specialist operators carry out research. This can be using full-scale pilot AD plants or small-scale laboratory experiments.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Portable and fixed gas analysers for incubator verification

    Geotech manufactures and supplies portable carbon dioxide monitors for use in incubator laboratories to verify CO2 in IVF and stem cell research applications.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Portable and fixed gas analysers for farm waste AD (small scale)

    Individual farms install AD (anaerobic digestion) plant and use for on-site heating to generate revenue and dispose of farm waste, which may be a mixture of animal and plant waste.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Portable and fixed gas analysers for mixed food waste AD

    Local authorities and waste contractors install AD plants to dispose of mixed organic waste and generate revenue.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Single Gas Monitoring - Fixed in-situ Duct Path

    Application: Measurements of single gas species through a fixed in-situ duct path. Example: Monitoring NH3 emissions in coal fired power generating stations.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Portable and fixed gas analysers for medical gas monitoring

    Geotech supports the monitoring of medical gases within dentistry, hospital and veterinary industries with hand held N2O, O2, CO2 and CO analysers.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Portable and fixed gas analysers for landfill gas field management

    Careful management of the many boreholes across a landfill gas field can optimise the gas yield and therefore the power generated from the gas.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Portable and fixed gas analysers for sewage / waste water treatment AD

    AD of human waste has been common in many countries for years but increasing energy costs now drive efficiency. Sewage processors are large energy users and AD can offset and help manage this.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Portable and fixed gas analysers for CO2 monitoring

    Monitoring industrial processes, CO2 gas quality control and indoor air quality can all be achieved using Geotech`s wide ranging CO2 analysers.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Portable and fixed gas analysers for landfill perimeter monitoring

    Controlling potentially explosive and asphyxiate gases from escaping off site is important for meeting Health and Safety standards and protecting the local environment.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Premium

    Measurement of acetaldehyde, methanol, & benzene in CO2 applications for gas manufacturers & food & beverage industry

    The BevAlert Model 8900 provides direct measurement of Acetaldehyde, Methanol, and Benzene (AMB) in Carbon Dioxide. The instrument is utilized by Specialty Gas Manufacturers and the Food and Beverage Industry to monitor trace impurities in CO2 used in carbonated beverages. The BevAlert Model 8900 employs a photoionization detector (PID). The AMB in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the AMB and other similar compounds continue on to the analytical column. Contaminants are then backflushed to vent. Acetaldehyde, Methanol, and Benzene are separated from potentially interfering components on the analytical column and elute to the detector for analysis.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Measurement of C1-C5 hydrocarbons for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented. C1-C5 hydrocarbons are separated on the analytical column and elute to the flame ionization detector (FID) for analysis.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Gas Detection

    Gas Detection is our core business, whether portable, colormetric, fixed systems or Hazmat. We do more than get you the equipment you need--we also help you select it, calibrate it, service it and maintain it. Our technicians, our sales reps and top management can speak with authority on the capabilities of our equipment and match it to your specific application. And we are the champions of the one-of-a-kind solution, because we have the know-how and the right tools.

    By Argus-Hazco based in Chesterfield, MICHIGAN (USA).

  • Premium

    Gas Detection Solutions for Gold Refining

    Hydrogen Cyanide (HCN) is a highly toxic compound that is a byproduct of many industrial processes. Existing HCN point sensors are maintenance intensive, slow to respond and provide limited coverage. Many HCN sensors do not work reliably in hot or cold weather, or in humid environments. Our technology can be used for fixed monitoring applications or for temporary protection of workers during construction projects.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Premium

    Measurement of C1-C5 with carbon dioxide for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons and Carbon Dioxide required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a fixed sample volume is carried to the pre-cut column. Backflush of the pre-cut column is timed from sample injection so that only C1-C5 hydrocarbons are eluted from the pre-cut column to the analytical column. C6+ hydrocarbons on the pre-cut column are then vented. Then a third column is used in conjunction with a second 10-port valve for individual analysis of methane. C1-C5 hydrocarbons are separated on the analytical column and elute to the flame ionization detector (FID) for analysis.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you