Only show results available in Virginia? Ok

flare gas Applications

  • Premium

    Flare gas measurement flow for solutions

    Our flow meters are used throughout the oil patch, from monitoring injection at the wellhead and measuring natural gas for heaters and boilers to measuring the various process gases at the refinery or flared in the field.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Flaring Solutions for the Mine Gas Industry

    ABUTEC manufactures and services low emission, low NOx mine gas incinerators (i.e. enclosed flares) for the mine gas industry. We specialize in offering compact solutions and price competitive equipment, whether you are upgrading due to new regulations, evaluating a gas-to-energy project or looking for a green technology to take advantage of tax credits. We specifically size and design for your unique mine gas needs with flares ranging in size from 10 SCFM up to 6,000 SCFM. All ABUTEC flares and solutions meet or exceed EPA regulations and are BACT-approved. ABUTEC installed the first mine gas incinerator in the U.S. and is the only company to provide proven carbon credit solutions.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for Gas Processing Facilities

    ABUTEC’s proprietary technology was designed to provide cost-competitive solutions and the industry’s lowest operating costs and cost of ownership. Our uniquely engineered burner system offers a significant reduction in make-up fuel over premixed surface combustion systems, thermal oxidizers or traditional pipe flares. In addition, we meet EPA requirements for 40 CFR 60.18 and local BACT (Best Available Control Technology) and MACT (Maximum Achievable Control Technology) at the state and local levels. We will perform a complete return-on-investment analysis for you while showing you your total cost of ownership.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Premium

    Portable and fixed gas analysers for gas flaring

    Methane is a powerful greenhouse gas and should be destroyed before it enters the atmosphere. Flaring is a common solution for gas with CH4 10% - 40%.

    By Geotech based in Leamington Spa, UNITED KINGDOM.

  • Flaring Solutions for the Midstream Oil and Gas industry

    At ABUTEC, we understand the unique challenges that accompany transporting oil to refineries. Among those challenges is environmental responsibility to the communities in which oil and gas companies operate. Our enclosed combustors meet or exceed increasingly stringent state and federal regulations and allow companies to operate in extreme conditions.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flares for Safe Disposal of Waste & Toxic Gases

    Our Flares are versatile in design & suitable for total destruction of waste gas/vapours. The waste gases/Vapours from petrochemical, WWTP, chemical plants have very high potential for environmental hazards. If allowed to released unburned into atmosphere. SIES offers flares and combustion systems for safe disposal of gases with high efficiency and reliability. System Designed to meet the API 521/537 norms High efficiency Burners with up to 99% thermal destruction Flares operable on fully automated, SCADA based solutions Customized & Cost effective project specific solutions Successful Installations of various types of flares at various locations.

  • Flaring Solutions for the Landfill Industry - Landfill Gas Combustor

    As the need for reliable alternative energy sources increases, industries all over the world are looking for ways to fuel business while having the smallest impact on the environment. At ABUTEC, we’re proud to be part of this shifting focus on alternative energy sources, and offer solutions for waste-to-energy systems that can put waste gas to work for your plant.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the Upstream Oil & Gas Industry - Oil & Gas Production (Enclosed Combustors)

    The EPA mandates that all upstream oil and gas operators install factory-certified combustors that meet new Quad O compliance standards, or perform field testing on the flare system post-installation. ABUTEC offers the only compliance-ready combustors available to the market, making expensive testing no longer necessary for our customers. The use of enclosed combustors is an integral piece of the extraction process and affords companies the opportunity to operate in extreme conditions while still maintaining low emissions and following Quad O regulations.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the Upstream Oil & Gas Industry - Oil & Gas Produced Water

    Because of the huge increase in U.S. natural gas production, there is elevated concern over the production of water that occurs in natural gas and oil fields. These concerns have led to additional state and federal regulations for low emission combustion technology and how companies will deal with produced water. ABUTEC’s high temperature enclosed combustors meet state and federal regulations for burning waste gas at a minimum of 99% destruction and removal efficiency (DRE), meaning almost 100 percent of the vapor to be destroyed is converted to CO2 and water. These combustors are of high quality, flexibility, low emissions, CSA-approved and able to burn very low calorific gas. Additionally, when combined with a heat exchanger, the unit can evaporate the excess produced water eliminating the need for expensive trucking or disposal.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the Upstream Oil & Gas Industry - Tank Batteries/Storage Tanks

    The EPA mandates that all upstream oil and gas operators install factory-certified combustors that meet new Quad O compliance standards, or perform field testing on the flare system post-installation. ABUTEC offers the only compliance-ready combustors available to the market, making expensive testing no longer necessary for our customers. The use of enclosed combustors is an integral piece of the extraction process and affords companies the opportunity to operate in extreme conditions while still maintaining low emissions and following Quad O regulations.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the Petrochemical & Refinery Industry

    ABUTEC’s goal in the petrochemical and refinery industry is to save you money. ABUTEC’s vapor combustor and enclosed flare line offers flexible and resilient burner technology to handle heavy hydrocarbon gases down to low quality or inert gases. We will save you money on capital costs and we will offer you a very fast payback (as low as 2 months) based on reducing the amount of make-up fuel and pilot gas required. This revolutionary technology is designed for you!

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Flaring Solutions for the Landfill Industry - Leachate Evaporation

    Increased concern for the environment has led to new opportunities for landfills to better manage their waste gas. ABUTEC works with the landfill industry to ensure that leachate evaporation is handled in the most efficient way possible. ABUTEC’s high temperature enclosed combustors meet state and federal regulations for burning landfill waste gas at a minimum of 99% destruction and removal efficiency (DRE), meaning almost 100 percent of the vapor to be destroyed is converted to CO and water. These combustors are of high quality, flexibility, low emissions, CSA-approved and able to burn very low calorific gas. When combined with a heat exchanger, the unit can efficiently evaporate the leachate eliminating the need for expensive trucking or disposal.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Premium

    Flow meters solutions for oil & gas sector

    Our flow meters are used throughout the oil patch, from monitoring injection at the wellhead and measuring natural gas for heaters and boilers to measuring the various process gases at the refinery or flared in the field.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Active Refinery Remediation

    Waste Management Unit (WMU) closures at this active refinery Waste Management Unit (WMU) closures at this active refinery - Installation of several soil, Liquid Boot, and full multi-layer geocomposite cover systems in various facility locations- - Sensitive construction practices including large scale activities near power lines, 30 inch raw water line, and several active emergency flares - Completed performance based in-situ solidification/stabilization, cap and closure, using ENTACT owned large diameter auger Delmag rig and custom-fabricated Geodrill - COC`s include heavy metals, PAH, volatile organic compounds, and petroleum hydrocarbons Performance criteria include an unconfined compressive strength of 10 psi, permeability coefficient of less than 2.1x10-6 cm/sec, and an admixture pH of less than 11.5 - ENTACT performed in-house treatability analysis to develop reagent admixture

    By ENTACT, LLC based in Grapevine, TEXAS (USA).

  • Premium

    Flow meters solutions for petrochemical sector

    Our flow meters are used throughout the oil patch, from monitoring injection at the wellhead and measuring natural gas for heaters and boilers to measuring the various process gases at the refinery or flared in the field.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Gas detection analyzers for pollution control

    Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another way.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    High quality gas sensor solutions for landfill

    State-of-the-art systems enabling easy monitoring of CO2 and CH4 gases. Capped Landfill Sites produce a range of gases, mostly methane and carbon dioxide. Legislation requires that these gases are safely removed from beneath the cap to avoid a physical explosion due to the build-up of pressure beneath the cap. Safe disposal usually entails burning such as flare stacks, internal combustion engines or by processing to produce Methane gas fuel. For large sites with access to power distribution infrastructure internal combustion engines are used to generate electricity which is fed into the local electricity grid. All of the above safe disposal process require the measurement of the Methane content (and in many cases the CO2 concentration). Edinburgh Sensors provide gas sensors for both Methane and CO2 that can be integrated into landfill gas processing systems enabling easy monitoring of these gases.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Solutions for Safe disposal during Emergencies, leakages, Tank Cleaning operations

    For temporary installation of a are, needed for only a short time in one place to handle localized waste gas disposal problem. SIES offers skid-mounted Mobile Flares Units to allow mobility. Such types of systems are useful for Gas pipe line/ Gas distribution network within a large plant (Petrochemical & Refineries) & Landfills. SIES design & Supply Mobile Flare for Oil and Gas industry, Waste gases, LFG operations and tank Cleaning operations. The Flares have inbuilt capabilities to handle wide variety of gas with full safety and precaution as per API Standards..

  • Premium

    Thermal mass flowmeter solutions for energy, natural resources industries

    Flow costs money! Sierra prides itself as being a leader in energy and natural resource measurement. Sierra’s thermal flowmeters provide precise flow measurement solutions for a variety of industrial and energy-related applications. In the drive toward discovering alternative energy sources, accurate thermal flowmeter readings of gases is critical for many energy-related processes such as flare gas measurement, cogeneration, biogas measurement, district energy applications, clean coal technology and many more.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Biogas monitoring

    meet governmental regulations, it is important to accurately monitor methane gas production, removal, venting, and burning. Knowledge of both methane flow and temperature at the flare stack can define when CH4 is being emitted to the atmosphere. The DX99 FlexPower™ Nodes can be installed in EX area with a Zone 0 ATEX certification. Use the analogue input to determine methane production levels and flow and use the thermocouple model to measure the temperature of a vent to verify the continuous combustion of methane.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you