Only show results available in Virginia? Ok

flow sensor Applications

  • Premium

    Precision liquid flow sensor measurement technology

    Accurate liquid flow sensor measurement can reduce water bills, determine leakage rates, and increase system efficiency. Solve accurate water and industrial liquid flow measurement requirements with clamp-on or insertion ultrasonic flow liquid flow meters featuring precision sensing elements or our complete line of multivariable mass vortex meters.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Sewage Treatment Plants and Flow Sensors for Industry Application

    In sewage treatment plants, flow sensors are primarily installed for internal reasons. Ultrasonic flow meters are used to control the flow velocity in partially filled and fulfilled pressurized pipes, specific plant components, for leak detection or to control the use of additives. International regulations such as the EU-Directive for handling municipal waste water require flow metering for a continuous surveillance of waste water flow. Defective flow monitoring in sewage-treatment plants can therefore influence their operation, but there can also be legal or environmental consequences.

     

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Water measurement systems & sensors for flow measurement

    The recommended type of measurement system will depend on several site-specific factors such as :-

    By Isodaq Technology - Hydro-Logic Group based in Bromyard, UNITED KINGDOM.

  • Premium

    Monitoring solutions for the flow monitoring areas

    Many large combustion plants are now required to monitor mass emissions of major pollutants and to do so requires an accurate measurement of stack gas velocity. The VCEM 5100 is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It has several key advantages, firstly the sensors optics are not in contact with the hot and dusty environment, the VCEM 5100 can monitor gases at temperatures exceeding 10000C and the analyser requires minimal maintenance. The VCEM 5100 can be used in extremely dust environments such as SCR’s when dust loadings exceed 10g/m3. The VCEM 5100 is in full compliance with EN/ISO 16911 part 2.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Solutions for irrigation flow monitoring in submerged culverts

    Greyline DFM 5.0 Doppler Flow Meters with waterproof ultrasonic sensors measure flow in submerged concrete culverts in the Raymond Irrigation District in Alberta, Canada.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Large pipes & ducts, hot tapping, purging flow solutions

    The measurement of gas flow in large ducts or pipes offers its own set of challenges. Large ducts and pipes often have swirls or turbulence in them which makes measurement of true gas flow difficult. Sierra has developed a number of solutions to this vexing problem, including stand-alone flow conditioning elements and multiple arrays of thermal sensors. By including hot taps and purging systems, such arrays can be very flexible.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Fibre Optic Distributed Temperature Sensing for Borehole Flow Monitoring

    Subsurface environments are critical not only as water resources but also for energy use including geothermal, CO2 sequestration and oil & gas operations. These sensitive environments are directly affected by anthropogenic activities, hence monitoring is essential. Temperature offers insight into a variety of physical properties and can be used for flow monitoring and flux quantification in the subsurface. Traditionally, point sensors have been used to collect temperature data; however, significant limitations exist.

    By Silixa Ltd based in Elstree, UNITED KINGDOM.

  • Water Monitoring and Flow Measurement Systems for Water Power

    Hydro power contributes to supplying approximately 3,5 per cent of electric energy generated worldwide. Its share in power generation from renewable resources lies at 18 per cent and will continue to grow as resources of fossil fuels are depleted. Hydro electric performance depends essentially on the usable altitude difference between upper and lower reservoir, and hence the resulting water flow. In order to use the “fuel” water in an optimal way, the flow velocity has to be monitored without any interruptions. Ultrasonic flow meters, flow sensors and clamp-on flow meters (OR clamp-on technology) are ideal for accurate flow metering and flow monitoring.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Area-velocity flowmeter for sewage lagoon discharge flow monitoring

    The Township of South Glengarry installs a new Greyline AVFM 5.0 Area-Velocity Flow Meter to measure continuous discharge from their municipal sewage lagoon. The sealed ultrasonic sensor is mounted in a horizontal 12` PVC pipe. The AVFM replaced a magnetic flowmeter that was unable to measure seasonal low flow rates.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Non-contacting solution for plugged off flow meters in the oil patch

    Wax and solids build-up were plugging off pipes and in-line flowmeters at this oil battery site in Alberta. Read how Petrobakken Energy solved the problem by switching to Greyline DFM 5.0 Doppler Flow Meters with non-contacting ultrasonic sensors.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Thin-film Measurement Technology for Test and Measurement Industry

    Test and measurement is an industry in which highly accurate and stable sensors are crucial. IST’s full line of temperature, humidity, and flow sensors has applications in this industry. Our sensors can be directly integrated into instruments including assemblies, probes, meters, and more.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Thin-film Measurement Technology for Measurement and Control Industry

    Measurement and control is an essential element in determining the effectiveness of products in the Process Control industry. A wide variety of applications are met in this industry by IST’s diverse family of temperature sensors. Additional process control applications are met by unique humidity and flow sensor products offered by IST.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Water Vapor Permeation Analyzers for Packaging Industry

    For packaging film barriers, the Systech Illinois range of water vapor permeation analyzers offer a wide measurement range with precision temperature, humidity and flow control. These analyzers utilise the Coulometric P2O5 sensor, which is more sensitive and stable than infra-red and does not require calibration. The P2O5 is the primary method for absolute moisture measurement.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Premium

    Thin-film Measurement Technology for Medical Industry

    The medical industry requires the accurate and consistent performance of its equipment. IST’s precise and reliable sensors meet the needs of these applications. Flow is perhaps the most widely used sensor in this industry, controlling medical devices where a gas or fluid is being supplied to a patient, or in cases of patient monitoring. Humidity sensors also have an application in the medical industry in products that control the air present or supplied to the patient.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Thin-film Measurement Technology for Automotive Industry

    With new innovations in the automotive industry, the need for accurate and robust measurement methods has become relevant. IST’s sensing solutions satisfy this need. Thin film platinum temperature sensors capable of measuring up to +1000°C provide precise measurement solutions for diesel engine applications. Additionally, thermal mass flow sensors are capable of monitoring vital fuel and engine systems in these harsh conditions. IST’s humidity sensors are also largely applicable in the control of cabin conditions.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Thin-film Measurement Technology for Building Automation Industry

    The Heating Ventilation and Air-condition (HVAC) market in the Building Automation industry focuses on controlling atmospheric conditions to make them more suitable. Among the conditions controlled by these systems are temperature and humidity. aIST’s thin film platinum and nickel temperature sensors are ideal for heat meter monitoring and control applications in HVAC because of their high resolution and long term accuracy. Additionally, IST’s thin film capacitive humidity sensors are ideal for controlling the relative humidity of an environment due to their rapid response times and accuracy over time. Thermal mass flow sensors also have applications in the HVAC industry as an indicator of duct airflow

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Premium

    Thin-film Measurement Technology for Appliance Industry

    Measurement and control is an essential element in the success of products in the consumer appliance industry. Precise temperature measurement in cooking equipment along with flow control in cleaning equipment are crucial to the proper functioning of different appliances. IST’s thin film platinum temperature sensors are ideal for the long term precise measurements required by many of these devices. They are also capable of measuring extremely high temperatures at which some appliances operate. IST’s flow sensors, with the ability to measure pressure differential and flow direction, are more than capable of meeting the needs of products in the appliance industry.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Wet gas monitoring for refineries

    Thermal mass flow meters provide excellent measurement capabilities in dry gas flows. They have proven durability, accuracy, and repeatability. However, thermal flow meters are sensitive to liquid droplets in a wet gas stream. For a thermal flow meter to work accurately in a condensing gas environment, the probe must be placed far enough downstream so that the entrained water has condensed onto the pipe wall. In a very wet environment, any condensing liquid (commonly referred to as mist or fog) contacting the sensor probes causes a high reading due to the liquid vaporizing on the heated portion of the sensor. As a result of this deficiency, measurements with conventional thermal meters are largely ignored when moisture levels rise because there is no confidence that the measurements are true.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Sewer Meter -

    Sewer Meters monitor sewage level and flow within the sewers. Benefits gained by sewer monitoring include: (1) Detection of overflow conditions before overflow occurs thereby preventing hazardous environmental events. (2) Detection of blocked sewer pipes, allowing quick and focused maintenance thereby reducing maintenance costs. (3)Detection of over-used and under-used pipes for long term municipal planning. (4) Monitoring of sewage flow in sensitive sites such as flow to the river or sea. (5) Estimation of sewage flow for costing purposes and especially for pricing the use of public infrastructure by industrial plants. The sewer meter solution consists of two main components: (1) The fielded component includes GaugerGSM, an ultrasonic non-contact level sensor integrated with GSM cellular transmitter. The fielded component also includes accessories such as external battery pack. (2) A web-based monitoring application for presenting data from all sewer sites.

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • River Level Monitoring -

    SUMMARY Fielded water level measurement stations, based on GaugerGSM sensor, report real time stream levels and flow. Stations are located across a stream-rich region of the upper Galilee feeding the Jordan river in the northern part of Israel. The region is a popular tourist destination due to its biblical origins, rich flora and fauna. Field data is available over the Internet to authorized engineers, site supervisors and Government officials. remote monitoring station - close up THE NEED The water basin in the Upper Galilee maintains a delicate balance between recharges, net precipitation, domestic and irrigation consumption, and water tourism (canoeing). Local and state officials are tasked to study the tradeoffs, manage risks and take actions to keep the balance. Monitoring stations are essential for data collection. remote monitoring station - overall

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you