Only show results available in Virginia? Ok

fuel analysis Applications

  • Gas Analysis Systems for Catalysis, Thermal Analysis, Fermentation and Bio Fuels

    Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas and vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, and include a range of special sampling, vacuum pumping and vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, and thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization. For thermal analysis including TPD/TPO/TPR, studies, Hiden gas analysis systems include enhanced pumping for hydrogen and special close coupled sampling to the TPD/TPO/TPR reactor for optimum thermal analysis response. In Biogas applications the simultaneous analysis of H2S, CO2, water vapour and CH4 in the PPM to 100% concentration range provides vital information for process development and process monitoring.

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Fuel Cells

    Hiden gas/vapour analysers, optimized specifically for fuel cell research, offer a number of key benefits over other analysis techniques: rapid response (critical for temperature programmed studies), wide dynamic range, repeatability and linearity, are all of the up most importance when analyzing processes - particularly those in the presence of hydrogen - with widely varying gas concentrations. These features provide for accurate, stable and reproducible analysis of low molecular weight species, over a wide concentration range, present in a hydrogen rich atmosphere, and are found to be invaluable in applications such as the conversion of hydrocarbons, or alcohols, to hydrogen (reformers) for use in Proton Exchange Membrane (PEM) Fuel Cells.

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Gas Permeation Analysis

    Dissolved Species Analysis Dissolved species analysis employing Hiden's high sensitivity membrane sampling technology for analysis of respiratory gases, hydrocarbons and sulphides is applied to a wide range of application areas including: Ecolological studies in sea water Bio fuel production from algae Pollution monitoring in river, estuary and reservoir waters Soil core analyses Fermentation

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Premium

    Substitute fuel sampling system

    A critical eye for every sample! Analytical shredding systems for QA work are a fundamental preliminary component in the production of substitute fuels. With primary fuels and finite resources subject to continuous price increases, the significance of substitute fuels continues to rise unabated. For plant operators, this offers first-class potential and attractive prospects for the future. Businesses that buy in their substitute fuel from external suppliers are faced with two key analytical requirements before putting it to use: pollutant analysis and calorific analysis. To ensure the proper handling of these analyses, a sophisticated sampling system is required.

    By Erdwich Zerkleinerungssysteme GmbH based in Igling, GERMANY.

  • Premium

    Gas Detection and Analysis Equipment for Energy Generation Industry

    Recent decades brought a rapid growth in the global demand for energy. This trend is accurate for both developed as well as developing countries. Electrical power is a key source of energy for the vast majority of the world population. Although the usage of renewable energy is on the rise, the majority of electric power production worldwide is still based on conventional methods utilizing coal, oil and gas as its fuel to power the stations.

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    Precision moisture analysis instruments for measuring moisture and ash in biomass

    If you produce or consume biomass fuels, you know that quality is critical to your success, and you know that moisture and ash content control are critical to biomass fuel quality. Too much moisture and you get poor efficience and high emissions. Too much ash and you get fouling and slagging. And if either of those is uncontrolled, purchase contracts can fall through. Computrac can help.

    By Arizona Instrument LLC based in Chandler, ARIZONA (USA).

  • Marine And Offshore Emissions Monitoring & Analysis

    The need to demonstrate environmental responsibility is key for today’s marine and offshore industries. Fuels and exhaust gas emissions are subject to international, regional and national controls and Charterers, as well as the public, demand high standards of performance and reliability.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Integrated real-time gas analysis solution for combustion efficiency sector

    CIC Photonics has made its mark with several R&D institutes where research is underway to determine the optimum thermodynamic performance of new turbine engine designs combined with new diesel fuel formulations. This sophisticated IRGAS technology has included not only a basic FTIR gas analyzer but also analyzers for H2, O2, THC, and a powder meter all integrated into a comprehensive IRGAS Solution.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Premium

    Laboratory instruments solutions for petrochemical and biofuel

    Crude oil is a highly complex mixture of hydrocarbons. Through desalting, distillation, and conversion, it is transformed into fractions of higher-quality hydrocarbons such as paraffins, aromatics, naphthenes, and olefins. Different ratios of these so-called PIANO compounds are blended to yield different fuel and lubricant types. Increasingly, fossil fuels are blended with biofuels. Both blending and refining processes are demanding and require precise and reliable analysis. Regardless whether you deal with fossil or biogenic products, we are your specialist when it comes to analyzing them in accordance with international standards.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Machine condition monitoring for biofuels

    Overview

    The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the final blend meets specifications.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Measurement solution for AD-211 VOC speciation in natural gas, syngas & gasification

    Composition of Natural Gas, Syngas via VOC Speciation

    The composition of fuel gas is important in order to determine calorific value and also to detect any unwanted contaminants in the gas. Online analysis is important in order to give real-time and direct action on issues.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Wind farm noise monitoring

    Wind energy is a renewable energy source that is being harnessed globally to reduce our dependence on fossil fuels and the associated impact on our environment. However, the environmental impact of the turbine noise and the blade pass noise is a concern that is carefully monitored and generally regulated. It is very important to be able to acquire accurate acoustical data for analysis, noise impact predictions, and regulatory compliance. Effective noise monitoring is a very valuable tool to manage a wind farm’s relationship with the community and with the local regulatory organizations. 

    By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you