Only show results available in Virginia? Ok

fuel monitor Applications

  • Premium

    Fuel flow measurement flow solutions

    Sierra has a complete line of fuel instrumentation to cover both steady-state gravimetric and transient consumption measurement. Our ultrasonic and vortex flow meters are an ideal choice for accurate fuel flow applications found in general industry. Through our Automotive Test Division, we also manufacture a line of ultra-high accuracy gravimetric and coriolis based fuel flow meters for engine and vehicle fuel consumption research.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Automated monitoring for the alternative fuel sector

    Automated monitoring for the alternative fuel sector.

    By Rel-Tek Corporation based in Monroeville, PENNSYLVANIA (USA).

  • Fuel Monitoring & Vehicle Tracking Solution

    Our Fuel Monitoring & Vehicle tracking solution is one of the best Telematics solutions in India and our current channel partners include an European auto giant manufacturing trucks in India. Fuel monitoring is time tested for less than 1% error in fuel level detection in vehicles. It has been deployed in various Trucks, Cranes, Diesel Generators & Storage tanks.

    By ORMAT Technologies Pvt. Ltd. based in Bangalore, INDIA.

  • Premium

    Measurement solution for hydrogen fuel cell testing

    As the alternatives to fossil fuels for power generation and automotive power become more widespread and preferred, so has increased the research and testing of hydrogen gas in fuel cells. The hydrogen (H2) gas used in fuel cell has to be free of impurities in order to make the fuel cell as efficient as possible and so quality thresholds have been set in legislation. Such legislation as SAE J2719 provides hydrogen fuel quality standards for proton exchange membrane (PEM) fuel cell vehicles. If impurities above these thresholds are present in the H2 fuel then there is a risk of not only making the cell inefficient, but also unrecoverable back to its peak operating voltage as the fuel cell electrode becomes poisoned.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Sulfur monitoring in gas feedstock for fuel cell power plant

    Trace level sulfur measurement (

    By MKS Instruments, Inc. based in Andover, MASSACHUSETTS (USA).

  • Carbon Dioxide (CO2) monitoring

    Carbon dioxide (CO2) is emitted in a number of ways. It is emitted naturally and through human activities like the burning of fossil fuels. Carbon dioxide (CO2) is generated as a by-product of the combustion of fossil fuels or the burning of vegetable matter, among other chemical processes. Small amounts of carbon dioxide are emitted from volcanoes and other geothermal processes.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Carbon Monoxide (CO) monitoring

    Carbon monoxide poisoning is the most common type of fatal poisoning in many industrialized countries. Carbon monoxide is a colourless, odorless and tasteless gas caused by the incomplete combustion of hydrocarbon fuels. Carbon monoxide is a toxic gas to the human body, when inhaled it binds to hemoglobin, myoglobin, and mitochondrial cytochrome oxidase reducing oxygen storage, transport and respiration in these organelles.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Sulfur Dioxide (SO2) monitoring

    Sulfur Dioxide (SO2) is the product of the combustion of sulfur compounds and causes significant environmental pollution. The main source of sulfur dioxide SO2 in the environment are from various industrial processes such as the burning of coal in power stations, the extraction of metals from ore and combustion of fuel within automobiles.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Measurement solutions for naval

    The importance of fuel cells and batteries is significantly on the increase in ship building. Here, our customers benefit from the extensive experience of SMART TESTSOLUTIONS. Here at SMART we have recognised the importance of high-performance energy storage systems and generators already at an early stage. Our competitive edge with regard to know-how refers most of all to the reliable monitoring of fuel cells and batteries. Our systems are by now being used in many countries around the world. Convince yourself of our high competence. Talk to us!

    By Smart Testsolutions GmbH based in Stuttgart, GERMANY.

  • Cloud software solutions for fleet operators using fuel

    The top run fleet operators use Titan software to get them down the road more efficiently. Whether it`s monitoring tank alarms in real-time, optimizing inventory across a network of both USTs & ASTs, or more efficiently managing fuel-system compliance, Titan makes heroes of fuel and environmental managers in the rent-a-car and transport industry. For starters, Titan mitigates your core environmental risks, arming you with a central dashboard and effective management tools that keep you on top of it all. This includes ATG alarms, release detection data, testing results, inspections, NOVs, and environmental-related forms, photos, and documents. Next, we hand over the key to responsible ATG network management, with on-demand tank inventory and remote gauge configuration to ensure you can effectively optimize your in-ground and above ground fuel. Finally, Titan streamlines your maintanance and work order process, linking you with site-level employees, techs, vendors, and field team members to centrally manage all facility requests in one system. In short, Titan software helps you run a better, more efficient rent-a-car or commercial fleet operation.

    By Titan Cloud Software Company, LLC based in Brentwood, TENNESSEE (USA).

  • Premium

    Applications Testing PAHs in Soil

    Sitelab's UVF-3100D analyzer is used to test soils for polycyclic aromatic hydrocarbons. PAHs are abundant in coal tars, coal ash, creosote and fuel oils.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Cetane Number of Diesel Fuels #3010

    The Cetane number of a diesel fuel is a measure of the ignition properties and is an important specification that must be met during fuel production. The traditional laboratory method for Cetane number determination is the knock engine method in which the fuel is burned and its combustion characteristics compared to known standards. This method is time and labor intensive, and provides no ability for real time control of production. This note discusses the use of Guided Wave hardware and software tools for the measurement of Cetane number in diesel fuel using fiber optic-based, Near-Infrared (NIR) spectroscopy. NIR is applied in real-time directly in process monitoring or as a laboratory procedure. In either case NIR is a time and money saving alternative to traditional methods.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • SO2 Monitoring in Air

    SO2 (sulfur dioxide) is measured in a number of applications. SO2 is used as a food grade preservative and must be regulated in accordance with government-set criteria to be safe for consumers. It is also measured in fuel exhaust to control for environmental pollution and in cement plants for process control.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    Continuous emissions monitoring in cement kilns

    Various pollutants form in the cement manufacturing process, especially when alternative fuels and waste-derived fuels are used. Typically a cement kiln using these fuels is a required to monitor hydrogen chloride (HCl). Gasmet CEM II is EN 15267-3 approved for HCl measurement in 0 … 15 mg/Nm3 range.High process temperatures result in generation of more nitrogen oxides (NOx) than in typical municipal waste incineration.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Radiation Monitoring for Nuclear Power

    The nuclear industry, including power plants, research centers and fuel cycle specialists are obliged by law to protect their staff, local populations, the environment and the processes they employ. With this in mind, Saphymo has developed a full range of dedicated products and systems, and plays a major role in radiation protection and ionizing radiation monitoring in both France and on an international scale. Saphymo constantly strives to satisfy safety requirements to the full, reinforce its technological know-how in the management of complex systems and anticipate customer needs, and offers adapted solutions in the fields of operational dosimetry, Radiation Monitoring Systems, contamination control, access control, environmental protection and survey meters. Saphymo also offers a broad panel of services intended to maintain its products in operational condition.

    By Saphymo based in Montigny Le Bretonneux, FRANCE.

  • Wind farm noise monitoring

    Wind energy is a renewable energy source that is being harnessed globally to reduce our dependence on fossil fuels and the associated impact on our environment. However, the environmental impact of the turbine noise and the blade pass noise is a concern that is carefully monitored and generally regulated. It is very important to be able to acquire accurate acoustical data for analysis, noise impact predictions, and regulatory compliance. Effective noise monitoring is a very valuable tool to manage a wind farm’s relationship with the community and with the local regulatory organizations. 

    By Larson Davis, a division of PCB Piezotronics based in Depew, NEW YORK (USA).

  • Airport Environmental Monitoring

    Water pollution from airport run-off is increasingly coming under public and government scrutiny. As environmental regulations tighten, the ability to monitor for aviation fuel contamination from runway run-off has become essential.

    Monitoring sites at airports can be extremely challenging often with no power or telephone lines available and with limited access for maintenance. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited for this application. Installed at various locations around the airport, deployed with it’s own integrated anti-biofouling system, utilising the GSM network, the monitoring sites send data to a secure ftp site, where any internet enabled device can access the data. In this way the systems act as any early warning system allowing any hydrocarbon discharge to be detected in real-time.

    Optional environmental monitoring features include remote control to allow the user to turn equipment on and off, change the sample rate and detection range. There is also a facility to allow SMS text and email alarm notifications triggered by user-defined set-points together with customised web pages, data displays and automated data downloads via an ftp server.

    Airport runoff can contain high concentrations of various pollutants, in particular polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs), the environmental levels of which have to be monitored. An understanding of the magnitude of contamination due to airport runoff water is important for the effective management of airport infrastructure. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited to the airport environment.

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • Gas Analysis Systems for Catalysis, Thermal Analysis, Fermentation and Bio Fuels

    Hiden gas analysis systems provide for high sensitivity, wide dynamic range, real-time analysis of almost any gas and vapour. Hiden’s application specific gas analysis systems are tailored to meet the specific application requirements, and include a range of special sampling, vacuum pumping and vacuum accessories. Hot zone sampling accessories are included for evolved gas analysis from furnaces, and thermo gravimetric analysers, TGA, for example. Thermal analysis methods are vital for catalysis characterization. For thermal analysis including TPD/TPO/TPR, studies, Hiden gas analysis systems include enhanced pumping for hydrogen and special close coupled sampling to the TPD/TPO/TPR reactor for optimum thermal analysis response. In Biogas applications the simultaneous analysis of H2S, CO2, water vapour and CH4 in the PPM to 100% concentration range provides vital information for process development and process monitoring.

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you