Only show results available in Virginia? Ok

fume removal Applications

  • Soldering Fume Extraction

    Soldering fumes are Unbreathable. Soldering enables the joining of metal parts by melting a filler metal to attach wires and other metallic components. The fumes generated from melting solder especially solder containing Lead or Tin present are dangerous and require local ventilation to remove harmful smoke from the work area. Soldering application need to be properly ventilated to prevent toxic fumes from reaching the worker`s breathing zone. There are a number of different industries such as the electronics assembly industry and electronics repair comapnies who must deal with the hazards of solder smoke. Fumes created by automated PCB soldering including wave soldering machines, handheld soldering irons, torch brazing and furnance brazing are often ignored because of the small volume of smoke generated. However, these applications still require careful consideration as dangerous fumes can impair employee’s respiratory tracts depending on the filler metals used. Because manual soldering applications require working with tiny components, workers end up positioning their heads right above toxic rosin or lead solder fumes with a direct exposure into their throat, nasal passages and lungs, and as a result, they can experience respiratory complications. Rosin irritation can cause various side effects and the inhalation of lead fumes is carcinogenic. As lead oxide smoke collects in your lungs, it can be transferred into your bloodstream. Diversitech recommends installing soldering fume extraction equipment to prevent the inhalation of dangerous fumes. These ventilation units will not only protect each person working at a soldering station when installed and positioned correctly, but they will also prevent fumes from contaminating other worker’s lungs.?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

  • Premium

    Applications and Air Pollutants Removed in the Metal Mining Industry

    Complete line of wet scrubbers for all metals mining applications. Scrubbers for removal of acid gases, particulate and mists from acidulation, reaction tanks and dryers. Sulfuric acid, sulfur dioxide, ammonia and hydrogen cyanide removal. Control of micron and submicron size particulate metal fumes from rotary furnaces.   

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Air treatment

    Activated carbon grades for air treatment applications such as fume cupboards, odour removal, respirator cartridges and so on.

    By Eurocarb, The European Subsidiary of Haycarb PLC based in Bristol, UNITED KINGDOM.

  • Premium

    Air cleaning system for the airports sector

    Dynamic Air Cleaners remove dangerous airborne particles that other air cleaning systems miss…including odors, VOCs, smoke, bacteria, allergens, fine dust, molds and pollen…without producing any harmful ozone. Dynamic Air Cleaners can have a significant impact on removing odors from outside air as the air comes through the ventilation system. This feature is very important in airports in the control of jet exhaust fumes that migrate into fresh air intakes.

    By Dynamic Air Quality Solutions based in Princeton, NEW JERSEY (USA).

  • Painting & Coating

    Paint fumes are Unbreathable. Spray Painting VOCs and Powder Coating dust are both harmful pollutants which are produced during painting operations. The volatile organic compounds (VOCs) emitted from paint can cause respiratory issues and require proper ventilation to remove harmful gasses from the work area. Powder Coating lines and spray painting produce dangerous fumes and dusts which need to be filtered or exhausted outside your facility. Industrial coatings and chemicals can produce toxic VOCs and foul odors which can effect worker`s health and reduce productivity. Some of the most common coatings are polymers which include polyurethane, epoxy and moisture-cure urethane. Many different industries required the use of glues, adhesives, solvents and different chemical agents in their production process, but are unsure of the best way to handle this nuisance. Exhausting fumes outside may be an option when VOCs are extremely dangerous and odorous but companies must also comply with EPA guidelines which regulate which gases can be emitted. In cold climates and in air-conditioned facilities, capturing, filtering and recirculating fumes can provide huge energy savings preventing costly heat loss and energy intensive air makeup systems. Utilizing activated carbon granules can allow operators to filter VOCs and odors from painting and cutting applications. Different quantities and types of carbon modules are required depending upon the contaminant. Contact Diversitech with an MSDS sheet detailing your chemical`s characteristics for an evaluation of your workplace air quality problem.?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you