Only show results available in Virginia? Ok

gas analyzer Applications

  • Gas detection analyzers for semiconductor industry

    Semiconductor manufacturing facilities employ a number of hazardous gases in their production processes. Whenever these gases are stored, distributed or used in manufacturing processes, there exists the potential for a hazardous condition. The primary hazards associated with these gases include fire, explosion, and contamination resulting in product loss or unscheduled preventative maintenance. These gases must be continuously monitored to ensure the health and safety of employees, to protect property, as well as to maintain regulatory compliance. Continuous gas monitoring in semiconductor facilities is a requirement of local and state regulations.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    Gas analyzers and detectors for the ethanol processing

    Gas chromatographs and hydrocarbon analyzers can be key in adding value to the ethanol production process and protecting the environment from Volatile Organic Compound (VOC)emissions created during the process.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Gas detection analyzers for coil coating industry

    Coil Coating is a high-temperature solvent vapor monitoring application in which rolls of aluminum or steel are coated with a color finish, oven cured to desired specs and sold to makers of cans, rain gutters, home appliances, building & automotive products and other fabrications. Coil coating requires the use of our PrevEx Flammability Analyzers to monitor the flammability of the solvent vapor driven off during the drying process. PrevEx analyzers accurately measure solvent mixtures and can withstand the temperatures required to prevent sample clogging in coil coating plants.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Gas detection analyzers for processing ovens & dryers

    Many industries are involved in coating products with solvent-borne materials and then employing ovens or dryers to remove the solvents from the finished product. The key hazard is an explosion from the build up of solvent vapors in the oven or dryer atmosphere. This buildup could occur by a malfunction in the production process such as: a sudden or improper amount of coating, a change in ventilation controls or excessive speed. In any of these cases, the concentration of flammable vapor has an opportunity to rise above safe levels, creating a potentially explosive mixture of vapor in air.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Gas detection analyzers for storage

    Flammable & combustible liquids are found in virtually every industrial plant. The quantities of these can vary from a few ounces in aerosol cans to several thousand gallons in bulk storage tanks. The principal hazard associated with storage is the accidental discharge or release of the flammable or combustible material into the surrounding area.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    Insitu Flue Gas Desulfurization - DeSOx Analyzer

    The Cerex UV3000P in-situ multi-gas analyzer for DeSOx, DeNOx, Ammonia Slip and general CEMs.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • NOx analyzers for Source Emissions

    NOx analyzers for measuring emissions from refineries, power generation, industrial processes and other sources, as well as for combustion research. View Source Emissions Products

    By ECO PHYSICS INC. based in Duernten, SWITZERLAND.

  • Gas detection analyzers for solvent based printing industry

    Solvent based inks in different colors and patterns are applied to paper, plastic, film and foil substrates. Finished products include all sorts of wrapping paper, wall covering, candy wrappers, flexible food packages, shrink labels, high quality magazines and many, many more. These industries employ ovens or dryers to remove the solvents from the finished product.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Gas detection analyzers for chemical & pharmaceutical processes

    Chemical and pharmaceutical facilities use a variety of hazardous gases and solvents in their production processes. Whenever these substances are transported, processed or stored, the potential risks are high for hazardous conditions. These substances must be continuously monitored to protect personnel and facilities from accidental releases or leakage. Our various lines of hazardous gas monitoring systems benefit the chemical and pharmaceutical industry in the following applications.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    Headspace Gas Analyzers for Food & Pharmaceutical Industry

    Carbon dioxide and oxygen headspace analysis for food and pharmaceutical applications. To ensure product packaging integrity and shelf life, many food and pharmaceutical products are packaged using MAP Modified Atmosphere Packaging.  Systech Illinois headspace gas analyzers offers fast, accurate MAP analysis of headspace in gas flushed food and pharmaceutical products.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Gas detection analyzers for pulp & paper mills

    Flammable non-condensible gases (NCG’s) are byproducts of the wood pulping process. Health and pollution regulations prohibit the release of these gases into the atmosphere. They are usually eliminated by passing them through an incinerator or by using them as fuel in the burner of a boiler or kiln. The incinerator, boiler or kiln however can be damaged by NCG’s which have built up explosive levels. Pulp mills require the use of our PrevEx Flammability Analyzers to monitor the NCG stream and detect and divert these dangerous concentrations before they can cause damage and shut down the mill. The PrevEx analyzers accurately measure the total concentration of flammable gases present in the NCG sample. Their high sampling speed dramatically improves response time—an important factor in pulp mill applications.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Gas detection analyzers for pollution control

    Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another way.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    Monitoring solutions for the portable multi-gas analyzers

    Portable multi-gas analyzers.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Production of high-accuracy ethanol calibration gas

    Fast and highly accurate analyzer system was needed for ethanol calibration gas standards. Precisive`s OXS-3100-HC configured for ethanol gas was selected due to its sub-ppm repeatability and high stability.

    By MKS Instruments, Inc. based in Andover, MASSACHUSETTS (USA).

  • Premium

    Analysis of H2S, Mercaptans and/or THT in natural gas with energyMEDOR

    Context & Challenges How to analyze H2S, mercaptans and/or THT for detecting the odor of the gas with the ability to have total organic sulfur calculation in a metering station?

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Online Gas monitoring

    Laser Gas analyzer Technical control of CO, CO2 , 0-100%/0-50% Safety Supervision of O2, 0-5%/0-21% Explosion-proof The front/back of recycling forced-draught fan The front/back of gasometer

    By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.

  • Premium

    Raman Spectrometry for the Oil & Gas Industry

    Increasing regulations and specifications for fuel quality, compliance and the need to detect calamities as quickly as possible underlined the importance of on-line analyzers. Since more than 10 years AppliTek has acquired a considerable expertise in the advice, design and implementation of on-line analyzers and complete monitoring systems in the oil and gas sectors. These systems are built by specialists with a proven track record in oil processing and refining and know where your expectations lie. A growing portfolio of products and turnkey solutions is your key to higher production efficiency, cost control and finally your competitive advantage.

    New technologies such as Raman spectrometry pave the way to new monitoring systems for quality control and process control.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Alkane (hydrocarbon) gas measurement for mudlogging in oil & gas drilling rigs

    The need for operator and maintainance intensive gas chromatograph (GC) analyzers was eliminated. Customer can now deploy all-optical, unattended sensor system for monitoring the composition of hydrocarbon gases (C1-C5) exiting the well bore which provides crucial information about the drilling formation that would save time and money.

    By MKS Instruments, Inc. based in Andover, MASSACHUSETTS (USA).

  • Premium

    Testing linearity of Air quality analyzers

    To test gas analyzers for Air Quality monitoring, gas references must have concentration in the range of hundreds to tenths ppb. Test gas bottles with so small concentrations are expensive and unstable. With the gas divider BetaCAP30X100 it's possible to dilute high concentration test gases getting 30 dilution steps in the range from 1:100 to 1:3.000 of the original test gas bottle concentration. Traditionally MFC based diluters are used for this application, but now our capillaries based diluter is available, with more stable performances.

    By Be.T.A. Strumentazione Srl based in Borgolavezzaro, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you