Only show results in Connecticut? Ok

gas analyzer Applications

  • Premium

    Gas Detection Solutions for Aluminium

    Primary aluminium smelting generates large amounts of hydrogen fluoride gas (HF). Worker safety and ambient air quality concerns require that HF be monitored at several locations in smelters. Traditionally, a variety of chemical sampling methods have been used for HF monitoring in and around smelters. However, these methods are labour intensive and require ongoing maintenance and consumables. During the past decade, laser based HF analyzers have been replacing the traditional methods. Laser analyzers are compact,...

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Gas monitoring instruments and systems for semiconductor manufacturing

    In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane C2F6.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for HAZMAT

    Accidents involving chemicals and other hazardous materials require fast and accurate gas measurements as part of the first response. The Gasmet™ DX4040 portable FTIR Gas Analyzer provides reliable identification and concentration measurements of hazardous gases in 60 seconds or less.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for engine emissions measurements

    The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Testing linearity of Air quality analyzers

    To test gas analyzers for Air Quality monitoring, gas references must have concentration in the range of hundreds to tenths ppb. Test gas bottles with so small concentrations are expensive and unstable. With the gas divider BetaCAP30X100 it's possible to dilute high concentration test gases getting 30 dilution steps in the range from 1:100 to 1:3.000 of the original test gas bottle concentration. Traditionally MFC based diluters are used for this application, but now our capillaries based diluter is available,...

    By Be.T.A. Strumentazione Srl based in Borgolavezzaro, ITALY.

  • Medical Gas Analysis for Process Industry

    USP37 Medical Gas requires a specific, selective and positive identification test using a paramagnetic signal. Regular analysis of medical gas is required to ensure that the oxygen concentration is NLT 99.0% volume. Following the appropriate United States Pharmacopeia standards, in this case specifically USP37, requires an analyzer which uses a paramagnetic based technology. The Systech Illinois Paramagnetic Oxgyen Analyzer PM700 is perfectly suited for this medical gas analysis application.

    By Systech Instruments Ltd based in Thame, UNITED KINGDOM.

  • NAPL Fingerprinting Analysis

    Sitelab's mobile laboratory was used by a client at a former oil refinery in Kansas and at a large tank farm in Massachusetts. The UVF data was used to delineate and map subsurface plumes of NAPL. Oil samples were collected from monitoring wells and analyzed for their GRO/DRO or VPH/EPH content.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Instrumentation technologies for offshore industry

    Offshore installations, whether it’s a drilling rig, production platform or FPSO, have some of the most testing operating environments possible. Operators must combine the drive to efficiency with their environmental commitments. Whatever analyzer you choose should not only match your needs and add value but must not take up valuable resources whether that’s personnel or consumables.

    By Advanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM.

  • Premium

    Gas monitoring instruments and systems for flavoring agents

    Manufacturing of powdered and liquid flavorings and fragrances involves production phases where flavoring chemicals may be released into the ambient air breathed by workers. Exposure control by gas analyzers in the production rooms and laboratories is necessary to ensure that the Time-Weighted Average (TWA) concentrations do not exceed the maximum Permissible Emission Limit (PEL) values.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for phosgene monitoring

    Phosgene COCl2 is a colorless gas. While it has been used as a Chemical Weapon Agent (CWA) in the past, currently this poisonous gas is also an important reagent in synthesis in the pharmaceutical and chemical industries. The plants using phosgene are typically equipped with gas sensors to detect leaks in the indoor ambient air. The critical situations arise when equipment in contact with the gas at the manufacturing facilities are serviced and maintained. As phosgene is very poisonous, even small gas pockets in...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Combustion gas analysis for the indoor environment industry

    Flue-gas analyzers are designed to be rugged and accurate at the same time. They are used by the HVAC industry, energy industry, process control, glass industry, food industry, universities and analysis is required.

    By IMR Environmental Equipment, Inc. based in St. Petersburg, FLORIDA (USA).

  • Premium

    Gas monitoring instruments and systems for stack testing according to EPA test method 320

    The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Gas analysis & monitoring systems for biogas analysis

    “Biogas” means a mixture of various types of gas (mostly methane) produced by bacterial fermentation in anaerobic conditions(absence of oxygen) of organic residues from waste, decaying plant, carcasses in putrescence. The analyzers of biogas by Infrared cells carry out the continuous analysis of CH4, O2, CO2, H2S and NH3. The whole process sees the decomposition of organic material by some types of bacteria, producing carbon dioxide, molecular hydrogen and methane(methane conversion of organic compounds...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • EPA 325 Benzene Fenceline monitoring

    EPA Method 325 Fenceline Monitoring Golden provides analytical products and services for compliance with fenceline monitoring requirements In addition to our analytical services to support source testing and other environmental projects, Golden Specialty, Inc. provides high quality analytical and consulting services and products to support our clients needs for compliance with the new EPA Method 325 fenceline monitoring requirements. We have been supporting clients with their EPA 325 needs since 2015 and are...

    By Golden Specialty, Inc. based in Friendswood, TEXAS (USA).

  • NOx analyzers for automotive, aviation, marine, and combustive engines industry

    These applications are characterized by demanding sample gas conditions, such as in automotive, aviation, naval, or combustive engine emissions, as well as in catalyst production. Focuses on high NOx, NOx-related and multigas-concentrations up to 10’000 ppm. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. The applications are characterized by demanding sample gas conditions, such as in automotive, aviation, naval, or combustive engine emissions, as well as in catalyst production.

    By Eco Physics Inc. based in Ann Arbor, MICHIGAN (USA).

  • ASTM Color (0-7) #3070

    ASTM color is an important product quality measurement for many refinery and petrochemical processes. The purpose of this application note is to determine ASTM (D1500) color with the ClearView db fiber optic photometer for real-time ASTM color measurement from 0-7. Quantify yellowness for product quality measurement for many refinery and petrochemical processes. Get results in real-time (seconds). Use for ASTM and other parameters in complex streams. Detect potential cross-over contamination in fill or supply...

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

  • Cloud Point of Diesel Fuel #3074

    The Cloud Point of a diesel fuel is the temperature below which wax forms giving the fuel a cloudy appearance. This parameter is an important property of the fuel since the presence of solidified waxes can clog filters and negatively impact engine performance. The traditional laboratory methods for the measurement of Cloud Point are optical in nature, but rely on cooling the fuel for the wax formation to occur. Guided Wave’s process analyzers can measure compositional changes in the fuel that will be directly...

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

  • Monitoring TPH in Produced Sand for Overboard Discharge

    Sitelab's TD-500D analyzer is used on offshore oil platforms to test TPH in produced sand. The sand is contaminated by crude oil and must be treated prior to overboard discharge in order to meet regulatory limits.

    By Sitelab Corporation based in West Newbury, MASSACHUSETTS (USA).

  • Integrated real-time gas analysis solution for combustion efficiency sector

    CIC Photonics has made its mark with several R&D institutes where research is underway to determine the optimum thermodynamic performance of new turbine engine designs combined with new diesel fuel formulations. This sophisticated IRGAS technology has included not only a basic FTIR gas analyzer but also analyzers for H2, O2, THC, and a powder meter all integrated into a comprehensive IRGAS Solution.

    By CIC Photonics based in Albuquerque, NEW MEXICO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you