Only show results available in Virginia? Ok

gas cell Applications

  • Integrated real-time gas analysis solution for R & D industry

    Universities and research institutes, including federal agencies and laboratories, regularly call upon CIC Photonics to custom design and fabricate gas cells and FTIR gas analyzers for innovative research studies. Their research spans a range from the synthesis of new chemicals to spectroscopy of the universe. Hence, their requirements often demand the complete utilization of the company’s staffing skills in physical chemistry, chemical engineering, optics, mechanical engineering, and electronic engineering, as...

    By CIC Photonics based in Albuquerque, NEW MEXICO (USA).

  • Integrated real-time gas analysis solution for semi-gases industry

    CIC Photonics first applied its IRGAS technology to semi-gases when a major semiconductor equipment manufacturer, Applied Materials, requested a demo of its capability to monitor gas quality for epitaxial reactor applications; that was in year 2000. The IRGAS System met all of the technical requirements, which included ppb sensitivity for moisture as an impurity, gas cell chemical resistance to both acid and basic semi-gases, and fast concentration tracking time response.

    By CIC Photonics based in Albuquerque, NEW MEXICO (USA).

  • Premium

    Gas monitoring instruments and systems for engine emissions measurements

    The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a...

    By Gasmet Technologies Oy based in Vantaa, FINLAND.

  • Air pollution control for the fuel cell industry

    Hydrogen and Carbon Monoxide abatement from fuel cell off gas processes – commonly use specialty catalyst for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Portable and fixed gas analysers for incubator verification

    Geotech manufactures and supplies portable carbon dioxide monitors for use in incubator laboratories to verify CO2 in IVF and stem cell research applications.

    By QED Environmental Systems Ltd. based in Coventry, UNITED KINGDOM.

  • Premium

    Cement industry online monitoring solutions

    Dust, SO2, NOx, CO, CO2 and other gases generated in the fuel decomposition, combustion and other production processes of cement industry have a serious impact on the atmospheric environment. So it is essential to check the content of these gases for energy conservation, increase productivity, reduce energy consumption and protect the safety of life and production. The company`s gas analysis technology can accurately and reliably measure various industrial gas content, to provide a complete gas analysis solutions...

    By Hangzhou Zetian Technology Co., Ltd. based in Hangzhou, CHINA.

  • Premium

    Pumping, thickening, dewatering and Drying technologies for Flue gas cleaning

    Wet scrubber sludges are dewatered and washed with K-S Rotary Drum Vacuum Filters and K-S Horizontal Vacuum Filters to produce dry filter cake and marketable by-product gypsum. Continuous operation, minimal operator attention, and low maintenance cost make vacuum filtration an ideal choice. The K-S Rotary Atomizer produces optimum reagent (lime slurry) droplet size in dry (semi-dry) scrubbers used for acidic flue gas neutralization. The K-S direct drive design provides the reliability needed in this critical...

    By Komline-Sanderson based in Peapack, NEW JERSEY (USA).

  • Anti-Fouling Membrane Filtration System for Flue Gas Industry

    PRE-TREAT FGD WASTEWATE TO MEET TIGHTENING STANDARDS NOW AND IN THE FUTURE; With the arrival of the US EPA`s effluent limitation guidelines (ELG), simple physical pre-treatment or biological removal of selenium and nitrate alone will no longer be sufficient to render FDG wastewaters safe for discharge. Controlled compounds now also include arsenic and mercury, with other metals and salts poised to appear on permits in the future.

    By BKT United based in Anaheim, CALIFORNIA (USA).

  • Integrated real-time gas analysis solution for electronic specialty gases industry

    The company’s entry into the electronic specialty gas market originated in 1994-95 as a consequence of the semiconductor industry’s demand for increasingly higher purity gases from the major gas producers. The issue was then and remains today to be primarily moisture impurity levels in the cleaning, etching, and treatment gases used in wafer production. In that earlier period when common wafer sizes were 6” and 12”, the semi industry required moisture concentrations to be 250 to 500 ppb or better; with each...

    By CIC Photonics based in Albuquerque, NEW MEXICO (USA).

  • Integrated real-time gas analysis solution for emissions industry

    Pollutant emissions from industrial smoke stacks are a major national concern due to both health concerns and climate change. As a consequence, there are at least tens of gas analyzer manufacturers in the U.S. alone that compete in that market and have done so for years. What CIC Photonics brings to that competitive field is its expertise derived from its Combustion Efficiency Solution and its high performance IRGAS Systems. The IRGAS-CEM provides real-time and simultaneous measurements of the multitude of...

    By CIC Photonics based in Albuquerque, NEW MEXICO (USA).

  • Gas Detection Solutions for Fertilizer Manufacturing

    Ammonia is a notoriously difficult compound to measure accurately and reliably using standard chemical sampling techniques. The great advantage of the optical laser gas detection technique for quantitative ammonia monitoring is that the optical measurement does not affect the air being sampled – and so a true, undisturbed value for ammonia concentration can be determined. The very high resolution and specificity of the laser method also means that is no interference from other gases in the air (for example,...

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Direct atomic absorption mercury determination in oil and oil products

    Introduction Determination of mercury in oil and petroleum hydrocarbon is currently a vital probl em due to the fact that the regulations for the mercury content in emission s from thermal power plants are becoming ever more stringent, and mercury poisons catalysts used in oil re fining.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Integrated real-time gas analysis solution for combustion efficiency sector

    CIC Photonics has made its mark with several R&D institutes where research is underway to determine the optimum thermodynamic performance of new turbine engine designs combined with new diesel fuel formulations. This sophisticated IRGAS technology has included not only a basic FTIR gas analyzer but also analyzers for H2, O2, THC, and a powder meter all integrated into a comprehensive IRGAS Solution.

    By CIC Photonics based in Albuquerque, NEW MEXICO (USA).

  • Mercury determination in natural gas

    Introduction The natural gas is a significant source of ingres s of mercury in the environment. The typical mercury concentration in natural gas may vary from 0.01 to 200 μ g/m3 . Mercury, being present in hydrocarbon gas, initiates corrosion of pipelines and catalyst poiso ning during gas transportation and processing, and these effects have serious implications for the gas-processing industry.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Carbon Dioxide Monitoring for Indoor Air Quality

    Introduction: Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide, carbon monoxide and volatile organic compounds to particulates, humidity and bacteria such as legionella. Carbon dioxide is one of the greatest variables affecting indoor environmental quality since it is produced by...

    By Edinburgh Sensors Ltd - a division of Edinburgh Instruments based in Livingston, UNITED KINGDOM.

  • Measurement solution for FTIR Vs. GC in gas analysis

    Comparison of TechnologiesA gas chromatograph (GC) has traditionally been the technology of choice for laboratory analysis of gas samples. GCs have been used for over 50 years in the qualification and quantification of complex mixtures of gases. The techniques and methodology required to run GCs are often a pre-requisite for any laboratory technician. Recent developments in Fourier Transform Infra-Red (FTIR) gas analysis has enabled this technology to start to replace GCs in the lab.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Analytical and measuring instruments of energy and chemicals industry

    Energy comprises many types of modes by using complex processes to explore, extract, refine, produce and transport these products. The energy industry comprises: Fossil fuels: coal, petroleum and natural gas (conventional as well as hydraulic fracturing), including liquid propane gas and liquid natural gas. Non fossil fuels such as: hydroelectric, battery technology, hydrogen fuel cells, nuclear power. Renewable fuels such as: biofuels, hydrogen fuel cells, geothermal, solar (photovoltaic). Nuclear power.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Analytical instruments for bioreactor and fermentor

    Bioreactors and fermentors are used in a variety of biotechnology and industrial applications, e.g. in cell culture or microbiology experiments. A precise control of gas flow is essential for controlling the biological process and to achieve the desired result.

    By Axetris AG based in Kaegiswil, SWITZERLAND.

  • Measurement solution for soil chamber gas flux

    Closed chamber gas flux measurements can be made with Protea FTIR analysers to allow researchers in the field of atmospheric gas analysis from agricultural and livestock to measure evolved gases such as N2O, CO2, CO, NH3, and CH4. Nitrous oxide (N2O) and Methane (CH4) emissions from soil, plant and livestock are especially important gases to measure, given their high potential as greenhouse gases (GHGs). NH3, whilst not a greenhouse gas on the scale of N2O, CH4 and CO2, is a major emission from agricultural, such...

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Measurement solution for accurate continuous formaldehyde measurement formaldehyde in emissions and ambient air applications

    Formaldehyde (HCHO) is the simplest aldehyde species and is present, or generated by, many sources (both natural and industrial). It is classed as a substance that is toxic and harmful to human health.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you