Only show results available in Virginia? Ok

gas detection control Applications

  • Premium

    Laser gas detection for process control

    Axetris laser gas detection OEM modules are used in a variety of process control applications: Agriculture, Industrial Process Control, Selective Catalytic Reduction.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Gas detection analyzers for pollution control

    Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another way.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    Gas Detection Solutions for Chemical Manufacturing

    There is no one solution for gas detection for the Chemical Manufacture and Use industry. There are a wide variety of gases that need to be measured for personnel safety, environmental, and process control reasons. Boreal has a number of gas detection solutions tailor made for the Chemical Manufacture and Use industry. Boreal has experience working with most of the largest chemical companies in the world. With installations in over 45 different countries around the world Boreal is the clear choice in open-path,...

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Gas Detection Solutions for Carbon Fiber Manufacturing Industry

    The carbon fiber manufacturing industry requires a unique process control solution that conventional gas detection technology lacks. Boreal Laser’s line-of-sight laser based gas detection system is the perfect fit for measuring HF in various pan oven applications and stack emissions monitoring . Whether you are looking for gas detection solutions for safety, environmental or process control needs Boreal Laser has you covered.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Gas detection analyzers for processing ovens & dryers

    Many industries are involved in coating products with solvent-borne materials and then employing ovens or dryers to remove the solvents from the finished product. The key hazard is an explosion from the build up of solvent vapors in the oven or dryer atmosphere. This buildup could occur by a malfunction in the production process such as: a sudden or improper amount of coating, a change in ventilation controls or excessive speed. In any of these cases, the concentration of flammable vapor has an opportunity to...

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Gas analysis & monitoring systems for leak searching

    Many chemical compounds and gas are invisible to the naked eye. But there are many companies that make intensive use both during and after the production process. The manner and frequency with which companies are required to monitor, document, report and rectify any escape of volatile gaseous compounds are established by regulations extremely rigid. The technology most widely used is the “Imaging Camera” or “sniffer technology.” “When we look for gas leaks, check all systems in...

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • End Point Detection

    Hiden Ion Milling Probe – End Point Detector The only dedicated end point determination tool for ion etch control and optimum process quality. End point Analysis. Target Impurity Determination. Quality Control / SPC. Residual Gas Analysis. Leak Detection The IMP is a differentially pumped, ruggedized secondary ion mass spectrometer for the analysis of secondary ions and neutrals from the ion mill process, featuring: High Sensitivity SIMS / MS with Pulse Ion Counting Detector. Triple filter Quadrupole,...

    By Hiden Analytical Ltd. based in Warrington, UNITED KINGDOM.

  • Determine Saybolt Color #3067

    Accurate online saybolt measurements from zero to +36. - Quantify yellowness for manufacturing control and product uniformity. - Ensure your product meets customer expectations - Detect potential cross-over contamination in fill or supply lines in real-time - Take the guess work our of product appearance standards - Application Note #3067

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

  • calibration gas

    calibration gas , British specialty gases company, with a local North Africa presence. We can supply you with high quality gas mixtures for a wide range of applications including Environmental Monitoring, Gas Detection, Mud Logging, Laser Cutting, and Laboratory Analysis. Our gas mixtures are used in the Oil, Gas and Petrochemical industries Our main focus is to give our customers gravimetrically produced, high precision calibration gas mixtures conforming to ISO 6142, along with a range of high purity gases...

    By AG Gases Ltd based in Stoke-on-Trent, UNITED KINGDOM.

  • Premium

    Gas monitoring and dust monitoring for the powerplants industry

    LaserGas measurements Boiler combustion control, O2 and CO DeNOx system, NH3 and NO Electrostatic precipitators (ESP), CO monitoring for explosion prevention Stack gas emissions, NH3, H2O, NO Coal silos, CO monitoring for explosion prevention and detection of smouldering fires (only in coal fired plants) LaserDust measurements Stack gas emission Coal silo, explosion prevention

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • MBE Desposition Rate Monitoring and Control

    XBS Triple Filter Quadrupoles configured for multiple source monitoring in MBE deposition applications. The custom configured ioniser provides for high stability, high senstivity monitoring of oxides and metals from both k-cell and e-gun sources. MBE monitoring and control. Molecular Beam Studies. Multiple beam source analysis. High Performance RGA. Desorption / Outgassing studies / Bakeout cycles. Chamber / Process gas Contaminants. Hiden XBS mass spectrometers for high precision scientific, process...

    By Hiden Analytical Ltd. based in Warrington, UNITED KINGDOM.

  • ASTM Color (0-7) #3070

    ASTM color is an important product quality measurement for many refinery and petrochemical processes. The purpose of this application note is to determine ASTM (D1500) color with the ClearView db fiber optic photometer for real-time ASTM color measurement from 0-7. Quantify yellowness for product quality measurement for many refinery and petrochemical processes. Get results in real-time (seconds). Use for ASTM and other parameters in complex streams. Detect potential cross-over contamination in fill or supply...

    By Guided Wave, Inc. based in Rancho Cordova, CALIFORNIA (USA).

  • Integrated real-time gas analysis solution for chemical decontamination industry

    The threat of terror in the form of chemical and biological warfare agents has been a reality globally since March 1995, when the Aum Shinrikyo sect killed 12 people and injured nearly 6,000 by releasing sarin nerve gas in the Tokyo subway system. More recently, the 2001 anthrax attacks in the USA was a wake-up call that the threat is real. Recent outbreaks of H1N1 and SARS posed threats of worldwide epidemics because air travel provides a means for these diseases to spread globally in less than 24 hours. A major...

    By CIC Photonics based in Albuquerque, NEW MEXICO (USA).

  • Premium

    Continuous emissions monitoring for CO2 capture

    The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3 and CO2. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few mg/m3.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Continuous emissions monitoring for sulphuric acid production plants

    The process control of a sulphuric acid plant needs good and reliable detection of gas phase sulphur dioxide (SO2). To measure SO2 is a challenge due to the corrosive environment and high concentration of SO2. Several places in the process needs to be monitored and to transport the sample gas is difficult. A large dynamic range is needed as the SO2 concentration can vary between 15% volume and a few mg/m3. Most systems installed need a lot of maintenance, sometimes as often as every day.

    By Opsis AB based in Furulund, SWEDEN.

  • Continuous emissions monitoring for carbon capture and storage

    The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few mg/m3.

    By Enviro Technology Services Ltd based in Stroud, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you