gas emissions Applications in Australasia

Premium

Gas detection analyzers solutions for chemical & pharmaceutical processes industry

Chemical and pharmaceutical facilities use a variety of hazardous gases and solvents in their production processes. Whenever these substances are transported, processed or stored, the potential risks are high for hazardous conditions. These substances must be continuously monitored to protect personnel and facilities from accidental releases or leakage. ...

By Control Instruments Corporation (CIC) Distributor in Nottinghill, AUSTRALIA.

Premium

Gas analyzers and monitoring systems for Compliance measurements

Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power ...

By Gasmet Technologies Oy Distributor in Kirrawee, AUSTRALIA.

Premium

Gas analyzers and monitoring systems for aluminum production sector

Production of aluminum from its ores at aluminum smelters results in carbon dioxide CO2, carbon monoxide CO, sulfur dioxide SO2, and hydrogen fluoride HF gas emissions to the atmosphere. Read about our solutions for aluminum ...

By Gasmet Technologies Oy Distributor in Kirrawee, AUSTRALIA.

Premium

Gas monitoring instruments and systems for nitric acid process

between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of Selective Catalytic Reduction unit (SCR), which deploys ammonia gas NH3 to limit emissions of NO and NO2. A modern nitric acid ...

By Gasmet Technologies Oy Distributor in Kirrawee, AUSTRALIA.

Premium

Environmental monitoring solutions for mechanical engineering sector

Industriel has a brilliant record in responding to complex customer requirements. Nanotechnology, mechatronics, composites, modern tools, fluid ...

By Vibrock Limited Office in Castle Hill, AUSTRALIA.

Premium

Ambient air quality monitoring solutions for fence-line monitoring

The OPSIS open-path monitoring system is an excellent tool for monitoring the air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be ...

By OPSIS AB Distributor in Knoxfield, AUSTRALIA.

Premium

Gas monitoring instruments and systems for stack testing

Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the ...

By Gasmet Technologies Oy Distributor in Kirrawee, AUSTRALIA.

Premium

Environmental monitoring solutions for bridge construction sector

How can we help? Industrial engineering is a branch of engineering which deals with the optimization of complex processes, systems, or organizations. Industrial engineers work to eliminate waste of time, money, materials, person-hours, machine time, energy and other resources that do not generate value. According to the Institute of Industrial and Systems Engineers, they create engineering processes and systems that improve quality and ...

By Vibrock Limited Office in Castle Hill, AUSTRALIA.

Premium

Environmental monitoring solutions for industrial construction sector

Industrial is a pioneer in design-build specializing in architecture and construction services. Plan and design, light construction, heavy construction, hydraulic machines, equipment and ...

By Vibrock Limited Office in Castle Hill, AUSTRALIA.

Premium

Continuous emissions monitoring solutions for mercury monitoring

Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable ...

By OPSIS AB Distributor in Knoxfield, AUSTRALIA.

Premium

Reciprocating Engine Generators Application Note

engines deliver greater flexibility, especially with regards to the use of renewable fuels such as biogas, they still require precise gas monitoring to ensure emissions limits are met.AMETEK Land’s solution is the FGA, an accurate and reliable multi-gas analyser that meets the requirements for a continuous ...

By AMETEK Land Instruments International Ltd Distributor in AUSTRALIA.

Premium

Gas analyzers and monitoring systems for carbon capture & storage (CCS)

Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of ...

By Gasmet Technologies Oy Distributor in Kirrawee, AUSTRALIA.

Premium

Gas detection analyzers solutions for oil & gas industry

The Oil & Gas industry is composed of three major components: upstream, midstream and downstream. The upstream industry finds and produces crude oil and natural gas. The midstream industry processes, stores, markets and transports commodities such as crude oil, natural gas and natural gas liquids. The ...

By Control Instruments Corporation (CIC) Distributor in Nottinghill, AUSTRALIA.

Premium

Gas monitoring instruments and systems for DeNOx process control

In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for ...

By Gasmet Technologies Oy Distributor in Kirrawee, AUSTRALIA.

Premium

Continuous emissions monitoring solutions for special applications CEM

OPSIS is a world-leading supplier of CEMS (continuous emissions monitoring systems) for various special applications in the industrial emissions sector. The OPSIS gas monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and ...

By OPSIS AB Distributor in Knoxfield, AUSTRALIA.

Premium

Environmental monitoring solutions for automotive manifacturing sector

You get speed, flexibility and better control to produce vehicles faster with greater precision. Auto parts, diesel engines, car body parts, gas fuels systems, electronic ...

By Vibrock Limited Office in Castle Hill, AUSTRALIA.

Premium

Emission control solutions for oil & gas industry

In Fluid Catalytic Cracking (FCC) processes, widely used in oil refineries, the separation and recovery of powder catalysts is a major concern. Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn't represent any environmental ...

By Advanced Cyclone Systems, S. A. (ACS) Distributor in Wellington, NEW ZEALAND.

Premium

Fence-Line Monitoring of Fugitive Emissions

The Opsis open path monitoring system is an excellent tool for monitoring air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By ...

By OPSIS AB Distributor in Knoxfield, AUSTRALIA.

Premium

Monitoring solutions for the continuous emissions monitoring

Multi-gas Stack Analyzers for Continuous Emissions Monitoring. FTIR and UVDOAS Analyzer Models available for Insitu Probe, Internal or External Cells, or Cross Stack Sample ...

By Cerex Monitoring Solutions, LLC. Distributor in Notting Hill, AUSTRALIA.

Premium

Marine monitoring solutions

Marine monitoring is a variant of OPSIS general offers for continuous emissions monitoring (CEM) and process control. The special operating conditions on-board vessels call for special measures to comply with regulations and expectations. However, OPSIS has mastered this environment and has for many years ...

By OPSIS AB Distributor in Knoxfield, AUSTRALIA.