Only show results in Virginia? Ok

gas engine Applications

  • Process design & engineering services for gas processing industry

    Proxion Process’ capabilities and experience in gas processing include gas dehydration, gas sweetening, sulfur recovery, NGL recovering and fractionation, natural gas liquefaction, and gas compression and reinjection. We can provide debottlenecking studies to increase throughput and decrease production schedules. Our personnel have experience in natural gas processing plants industry-wide.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Premium

    Gas monitoring instruments and systems for engine emissions measurements

    The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a dynamometer laboratory, or the portable version can be used for roadside tests.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Industrial Solution for gasification & synthetic gas

    Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Environmental technology for gas cleaning industry

    For many decades now Körting gas scrubbing plants have distinguished themselves in diverse branches of industrial exploitation with great success. The principle components of these plants are the: The conversion of basic process engineering oparations for the exchanging of heat and materials such as cooling, physical and chemical absorption and dedusting permit separation and recovering of gaseous, liquid and solid materials from gases.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Flaring Solutions for Gas Processing Facilities

    ABUTEC’s proprietary technology was designed to provide cost-competitive solutions and the industry’s lowest operating costs and cost of ownership. Our uniquely engineered burner system offers a significant reduction in make-up fuel over premixed surface combustion systems, thermal oxidizers or traditional pipe flares. In addition, we meet EPA requirements for 40 CFR 60.18 and local BACT (Best Available Control Technology) and MACT (Maximum Achievable Control Technology) at the state and local levels. We will perform a complete return-on-investment analysis for you while showing you your total cost of ownership.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Aquatech Water Management Solutions for Unconventional Gas

    Managing produced water from shale gas wells is challenging and requires a variety of solutions & services. Aquatech offers mobile and/or central facility solutions that provide customers to suit their needs. The demands of field operations on equipment and personnel require a high level of continued dedication, experience, & engineering. Aquatech delivers reliability on all of these fronts to ensure that water management & treatment enable gas production to proceed rapidly and efficiently. Our solutions ensure a consistent water composition, with minimal contamination. This enables predictable production characteristics such as consistent hydro fracturing and minimal down-hole scaling. Most import, Aquatech offers sustainable solutions that are friendly to the environment and to the gas producer. The industry needs treatment standards to exceed current and future regulatory requirements. Our commitment to sustainability sets a standard way beyond what many believe is possible today.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Premium

    Measurement of hydrogen in fuels for oil & gas industry

    The combustion properties of fuels are key to the efficient and safe operation of engines used in machinery and plant. One important way to measure the combustion properties of a fuel is by its hydrogen content. The measurement of hydrogen content is widely used for the characterisation of aviation fuel but with the increasing costs of all fuels and the greater incentives for fuel adulteration, this test is increasingly being adopted for non-aviation applications. Our benchtop NMR analyser MQC-23 system is widely used for the measurement of hydrogen in fuels in accordance with ASTM D7171-05.

    By Oxford Instruments plc based in Abingdon, UNITED KINGDOM.

  • Premium

    Ultraviolet Disinfection for Oil & Gas Applications

    The process of disinfecting water with UV light is a proven technology for drinking and process water in many industries, however the high standards required by the offshore industry commanded the disinfection systems to be engineered way beyond the normal specification of many manufacturers` As the market leader for offshore UV systems, atg UV technology UV systems are used in a number of key areas in the offshore industry:- atg UV has provided UV systems to treat drinking water, waste water, hydraulic stimulation fluids (well injection and unconventional gas fracking) and SRB reduction for pipeline hydrotesting and corrosian protection. These systems are often supplied as skid mounted duty/standby packages, or containerised solutions and are designed to individual client specifications. Clients include: Shell, BP, Total, Statoil, AKER, British Gas, Veolia, Halliburton, Baker Hughes, BJ Services, ODE, Ormandy, SLP and Petrobrass.

    By atg UV Technology based in Wigan, UNITED KINGDOM.

  • Innovative Pump Technology for Oil and Gas Industry

    Medium-specific solutions, equipped with oil and gas tested materials and components, dimensioned for each application. Our engineers have the task of finding an energy-efficient, safe and powerful EDUR solution for this.

  • Premium

    Recycling Systems for the engineered fuel, biomass / RDF

    Engineered Fuel and waste fuels are an increasingly important resource Waste-derived materials as an alternative to oil, gas and coal, selected and treated with the most up-to-date technologies, can be transferred into energy thanks to their combustible properties, these efforts assist us to obtain zero waste.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Premium

    Industrial air pollution control for the automotive and vehicle engineering

    Increased mobility and the soaring worldwide demand for cars have opened up questions regarding sustainability and environmental protection. Hazardous exhaust gases are emitted not only when driving vehicles, but also during their production. The waste gas volumes in the automotive industry reach up to 200,000 Nm³/h.

  • Waste gas treatment for the LED industry

    Market analysts predict sustained growth in demand in the LED industry. After LED backlighting for the small LC displays of mobile phones and the LC displays of larger screens in the television market, the next potential growth market is the lighting industry: Sales of LEDs in this market in 2012 are almost USD 3.5 billion – thus nearly doubling since 2010. Analysts are expecting a growth of more than USD 7 billion in 2014 and believe that the total market for LEDs should peak at USD 17.7 billion.* A mass market of this scale for LEDs also means increasing emissions that need to be abated by specific waste gas treatment systems at the point of use. In the manufacture of products based on innovative light emitting diode (LED) technology, ammonia and hydrogen are used in large quantities as process gases. The environmental engineers at DAS have recognised this market trend and developed new solutions such as LARCH for waste gas treatment in MOCVD processes.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Air Emissions Management for Tanks

    Facilitates Data Management for Tank Emissions Reporting; VisionMonitor Software leverages existing technology investments you have deployed to run your current operations. It simplifies the process of gathering tank inventory data by linking to existing internal systems, automating data collection from these systems via a scheduler, and by providing a path for manual input when required for sources such as diesel engines, package boilers, etc.

    By VisionMonitor Software, LLC based in Houston, TEXAS (USA).

  • Wireless industrial I/O applications for the oil and gas Industry

    Banner Engineering`s SureCross product line offers reliable wireless industrial I/O monitoring and control solutions for most applications, including these examples of wireless installations for the oil and gas industry.

    By Banner Engineering Corp. based in Diegem, BELGIUM.

  • Premium

    Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels

    As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and measurement results take less than one minute.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Centrifuges for Edible Fats, Oils & Biofuels

    Centrifuges for Extracting Oil and Fat, and Manufacturing Biofuels. Centrifuges are often the focal point of process engineering systems used in oil and fat extraction as well as for manufacturing biofuels.

    By Flottweg SE based in Vilsbiburg, GERMANY.

  • Integrated real-time gas analysis solution for R & D industry

    Universities and research institutes, including federal agencies and laboratories, regularly call upon CIC Photonics to custom design and fabricate gas cells and FTIR gas analyzers for innovative research studies. Their research spans a range from the synthesis of new chemicals to spectroscopy of the universe. Hence, their requirements often demand the complete utilization of the company’s staffing skills in physical chemistry, chemical engineering, optics, mechanical engineering, and electronic engineering, as well as computer programming.

    By CIC Photonics, Inc. based in Albuquerque, NEW MEXICO (USA).

  • Premium

    High quality gas sensor solutions for landfill

    State-of-the-art systems enabling easy monitoring of CO2 and CH4 gases. Capped Landfill Sites produce a range of gases, mostly methane and carbon dioxide. Legislation requires that these gases are safely removed from beneath the cap to avoid a physical explosion due to the build-up of pressure beneath the cap. Safe disposal usually entails burning such as flare stacks, internal combustion engines or by processing to produce Methane gas fuel. For large sites with access to power distribution infrastructure internal combustion engines are used to generate electricity which is fed into the local electricity grid. All of the above safe disposal process require the measurement of the Methane content (and in many cases the CO2 concentration). Edinburgh Sensors provide gas sensors for both Methane and CO2 that can be integrated into landfill gas processing systems enabling easy monitoring of these gases.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Cloud Point of Diesel Fuel #3074

    The Cloud Point of a diesel fuel is the temperature below which wax forms giving the fuel a cloudy appearance. This parameter is an important property of the fuel since the presence of solidified waxes can clog filters and negatively impact engine performance. The traditional laboratory methods for the measurement of Cloud Point are optical in nature, but rely on cooling the fuel for the wax formation to occur. Guided Wave’s process analyzers can measure compositional changes in the fuel that will be directly related to the wax formation and hence the Cloud Point. This note will discuss the use of Guided Wave hardware and software tools for the measurement of the Cloud Point of diesel fuel using fiber optic-based, near-infrared (NIR) spectroscopy. NIR can be applied in real time directly in process.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you