Only show results available in Virginia? Ok

gas filter Applications

  • Premium

    Air Filter Housings for the Gas Industry

    By Shelco Filters based in Middletown, CONNECTICUT (USA).

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Industrial Meshes For Hot Gas Filtration

    The SolidWEAVE stainless steel filters from GKD have for decades been in use in a variety of applications for hot gas filtration. Knowledge of the specific requirements for the filtration of hot gases and continuous optimization and further development result in the high quality of our filter meshes.

    By GKD - Gebr. Kufferath AG based in Düren, GERMANY.

  • Water removal filtration

    SAF is the key component for a wide range of enhanced nonwoven filter media fabrics that are designed for the removal of water and particulates from aviation fuel, automotive diesel and a wide range of oils. Such fabrics help reduce problems associated with water contamination in such situations. Its versatility gives rise to cost savings over traditional cellulosic-based absorption media, while offering full compliance potential to stringent international filtration standards – particularly in the aviation fuel and hydraulic oil markets. Applications: A significant reason for the majority of oil and fuel system failures is the presence of high water levels in dissolved, dispersed and free water. SAF-based filter media fabrics can remove both dispersed and free water to very low ppm levels at industry leading rates. This leads to reduced fuel and oil degradation and provides the required filter quality for efficient machine operation.

    By Technical Absorbents based in Grimsby, UNITED KINGDOM.

  • Membrane filter press for palm oil

    Membrane press filter is composed of diaphragm plates and van plates. The feeding pump press the slurry to enter the filter chamber.When the filter material become after filter cake through the filter cloth.Then gas will be guided into septum,giving enough pressure to solid and lowering its water content.

    By Henan Jincheng Filter Equipment Co., Ltd based in Yuzhou city Henan province, CHINA.

  • High performance solid-liquid separation system for deepwell industry

    Deepwell facilities for the disposal of plant waste streams often employ nominally rated spray spun elements, bags, diatomaceous earth filters, and various other types of conventional filtration technology. These labor intensive systems provide protection of the well from occlusion by suspended particle matter, albeit often with high operational cost and limited assurance of reliable fluid quality. The ongoing challenge facing a deepwell system is the requirement that the formation into which the waste is being pumped must maintain its porous nature in order to operate effectively. Therefore, reliable, effective filtration to capture particles with the potential to plug the formation is critical. Pentair Porous Media’s proven advanced separation technologies have been employed in deepwell disposal systems to enhance system reliability, assure well integrity and lower operating costs and system maintenance.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Premium

    Gas monitoring and dust monitoring for the cement industry

    LaserGas measurements

    • Preheater exit, CO monitoring
    • Electrostatic precipitators (ESP) after pre-heaters, CO monitoring for explosion prevention
    • Coal silo, CO monitoring
    • Exit of coal mill, dust filter, CO monitoring
    • Stack gas emissions, HCl and HF

    LaserDust measurements

    • Stack gas emissions
    • Coal silo, explosion prevention

    By NEO Monitors AS based in Skedsmokorset, NORWAY.

  • Cloud Point of Diesel Fuel #3074

    The Cloud Point of a diesel fuel is the temperature below which wax forms giving the fuel a cloudy appearance. This parameter is an important property of the fuel since the presence of solidified waxes can clog filters and negatively impact engine performance. The traditional laboratory methods for the measurement of Cloud Point are optical in nature, but rely on cooling the fuel for the wax formation to occur. Guided Wave’s process analyzers can measure compositional changes in the fuel that will be directly related to the wax formation and hence the Cloud Point. This note will discuss the use of Guided Wave hardware and software tools for the measurement of the Cloud Point of diesel fuel using fiber optic-based, near-infrared (NIR) spectroscopy. NIR can be applied in real time directly in process.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

  • High performance filtration & separation system for amine

    There are a number of factors that affect the capacity and operation of a typical amine system. Solid or liquid contaminants in the system may cause foaming. The presence of foaming is typically addressed by the addition of expensive antifoam chemicals and/or by reducing the operating capacity of the amine system. In addition to this, the presence of contaminants in the system can foul heat exchangers and column packing or trays. These solid and liquid contaminants are either ingressed into the system with the feed stream, or generated within it as a result of the chemistry of the system. These contaminants are typically addressed by means of particle filters and carbon adsorption.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

  • Premium

    Emission control & air dedusting for fuel oil boilers

    For PM emission control in high temperature exhaust streams, such as fuel oil boilers, usual dedusters such as bag filters are very maintenance demanding. Particularly, diesel and fuel particulates are very sticky and clog to filter elements, unless protection reagents are used. Flue gas cooling is also needed in front of the filter when temperatures are higher than 200 ºC. On the other hand, regular cyclones and multicyclones are frequently not able to reduce emissions to present emission limits.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Customized Solutions for groundwater treatment industry

    WesTech offers a wide variety of solutions for groundwater treatment for potable use. Whether your treatment objective is gas removal, iron & manganese removal, color removal, softening or even filtering a source under the direct influence of surface water, WesTech has your solution.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Measurement solution for HF emissions from brickworks

    Brick kilns, as well as other plants such as ceramics manufacturers and fertiliser producers, are a major producer of hydrogen fluoride (HF) emissions. HF is highly reactive gas and seriously damaging to human health, so has strict emissions limits imposed by legislation. In addition to the effects to humans, emissions have been found to damage crops and fruit trees, as well as the general environment. The brick industry strives to reduce the amount of HF emissions and numerous projects have been carried out into the research and development of proposed process modifications that introduce ways to reduce hydrogen fluoride emissions via the latest technology such as filters and scrubbers.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Power Plant Coal Fired Boiler Filtration

    Dust filter PPS Filter Bags For Coal Fired Boiler Gas Filtration.

    By Zhejiang Grace Envirotech Co., Ltd based in XIAOSHAN, CHINA.

  • Premium

    Emission control & air dedusting for steel and ferrous alloys

    teel and ferrous alloys production happens in industrial manufacturing processes which involve high temperature exhaust streams, often at more than 900 ºC. Typically, the gas flows into a gas conditioning tower to cool down to approximately 200 ºC, before entering into an ESP. These flue gases from steel or ferrous alloys kilns are also very maintenance demanding for bag filters and the very small size of the particles limit the use of usual dedusters such as regular cyclones and multicyclones as pre-separators. Bag filter failure is consequently a very common problem for clients in this industry. 

    Client`s needs include a very robust dedusting system, either serving as end-stage collector avoiding the need to cool down flue gases, or strongly minimizing the loads of aggressive material to bag filters. 

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Industrial air pollution control for the chemical and petrochemical industry

    CTP systems can be found in every leading production company: thanks to the experience and the expertise developed in partnership with our customers for processes with inconsistent waste gas volumes; varying concentrations of organic components; gases contaminated with aerosols. CTP has installed systems for waste gas streams ranging from 1,000 to 200,000 Nm³/h. CTP supplies this industry with mainly catalytic systems, regenerative thermal oxidisers (RTO) and adsorbers. As the flue gases in this industry are often explosive mixtures, CTP systems have to be completed with special safety conduits and filters to help reduce hazards during continued operation.

  • Premium

    Aqua M300 Intelligent Geophone

    With the Aqua M300 leak detectors have a multifunctional tool to Pinpoint or Pre-locate leakages and to trace pipes in conjunction with a PWG. The biggest advantage compared to other related products are the 256 analogue and digital filters which enables the user to shut off disturbing noises very precisely. Also the extension for H2 tracer gas comes without competition and makes this device a essential tool for leak detectors.

    By F.A.S.T. GmbH based in Langenbrettach, GERMANY.

  • Premium

    Bio-Hazard and Crime Scene Cleanup

    OmniAire HEPA air filtration machines can remove odors and toxic VOCs released into the air during the cleaning and removal process. OmniAire portable air filtration and purification equipment offers the most efficient and economical solution to reduce toxicity and improve safely for your Bio-Hazard projects. Typically, the standard 99.97% HEPA filter is sufficient, however, if you need the next level of airborne pollutant removal for more toxic applications, such as filtering out VOCs, viruses, smoke and gas molecules, add an OdorGuard Activated Carbon filter.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Biomass Furnace Dust Filtration

    Application: PPS (Ryton) Filter Bags are widely used in coal-fired boilers, waste incinerators, coking furnaces, kiln furnaces,Biomass Furnace ,chemical dry process of flue gas cleaning processes, also using, carbon black, powder collection, pneumatic conveying, cement industry, and more. When due to chemical attack and hydrolysis causes, Aramid cannot be used, PPS (Ryton) Filter Bag can be substituted.

    By Zhejiang Grace Envirotech Co., Ltd based in XIAOSHAN, CHINA.

  • NH3 Monitoring in Air

    NH3 (Ammonia) is a colorless gas with a distinctive pungent smell. Ammonia monitoring is essential in coal-fired power plants, where NH3 is used to reduce NOx emissions. The ammonia consumes all of the NOx, but its high concentration that is needed for these purposes also starts reacting with other things and in the process can clog up filters and cause premature failure of expensive SCR equipment and pre-heaters. Not to mention that these high levels create an irreparable damage to the environment.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you