Only show results available in Virginia? Ok

gas hazard Applications

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Gas monitoring instruments and systems for HAZMAT

    Accidents involving chemicals and other hazardous materials require fast and accurate gas measurements as part of the first response. The Gasmet™ DX4040 portable FTIR Gas Analyzer provides reliable identification and concentration measurements of hazardous gases in 60 seconds or less.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Bio-Hazard and Crime Scene Cleanup

    OmniAire HEPA air filtration machines can remove odors and toxic VOCs released into the air during the cleaning and removal process. OmniAire portable air filtration and purification equipment offers the most efficient and economical solution to reduce toxicity and improve safely for your Bio-Hazard projects. Typically, the standard 99.97% HEPA filter is sufficient, however, if you need the next level of airborne pollutant removal for more toxic applications, such as filtering out VOCs, viruses, smoke and gas molecules, add an OdorGuard Activated Carbon filter.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Premium

    Methane gas leak detection

    Methane emissions from oil and natural gas systems is primarily the result of normal operations or system disruptions. These hazardous emissions can be cost-effectively reduced by upgrading technologies or equipment, and by improving operations. However, in order to do so, one must be able to detect and identify the existence of a fugitive gas leak. Opgal`s EyeC Gas Thermal Imager for gas leak detection, is one of the most advanced cameras used to detect leaks. Thus, it becomes a required tool in mitigating and reducing fugitive emissions of methane gas.

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    VOCs gas leak detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threat

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    Industrial Solution for gasification & synthetic gas

    Gasification and synthetic gas production from various waste products are becoming increasingly important energy recovery technologies. Often, the synthetic gas contains various hazardous contaminants including H2S, HCl and other acids, heavy metals, and tars. The gas requires cleaning before it is introduced in the engine or boiler. Most of these processes generate significant concentration of tars. The tars can vary from very low molecular weight to large and complex chains.

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Gas detection analyzers for semiconductor industry

    Semiconductor manufacturing facilities employ a number of hazardous gases in their production processes. Whenever these gases are stored, distributed or used in manufacturing processes, there exists the potential for a hazardous condition. The primary hazards associated with these gases include fire, explosion, and contamination resulting in product loss or unscheduled preventative maintenance. These gases must be continuously monitored to ensure the health and safety of employees, to protect property, as well as to maintain regulatory compliance. Continuous gas monitoring in semiconductor facilities is a requirement of local and state regulations.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    Drill Cuttings

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the drill cuttings. Our VacuDry® technology is designed to safely separate oil, water and mercury from the solids (including NORM), allowing reuse of the oil and safe disposal of the water, mercury, solids and NORM. Find more information and the benefits of VacuDry® drill cuttings plants on http://www.econindustries.com/applications/drill-cuttings

    By econ industries GmbH based in Starnberg, GERMANY.

  • Hydrogen sulfide removal treatment for oil and gas industry

    The chemicals used for treating for H2S in the oil and gas industry can sometimes be just as hazardous as the H2S itself. MIOX wants to eliminate these hazardous chemicals and let oil & gas companies create their own safe chemistry on-demand as they need it. Whether it is high volume treatment, or low volume treatments in the middle of nowhere with no resources, we have a solution for your need.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Manufactured Gas Plant Site Remediation

    It is estimated that there are over 3,000 former Manufactured Gas Plant (MGP) sites across the United States. Another 4,000 dot the landscape of Canada, the UK, continental Europe and Japan. These sites were built long ago on rivers or harbors, often on the outskirts of towns and cities; locations that are now frequently in close proximity to infrastructure, buildings and residential areas. Many underlie or abut valuable commercial, residential, and municipal properties, posing environmental hazards to ground and surface waters. The urgency of remediation has increased due to a potent blend of community activism, regulatory pressure, high real estate values, and the need to reduce liability in light of the Sarbanes-Oxley Act and other measures.

    By TerraTherm, Inc. based in Gardner, MASSACHUSETTS (USA).

  • Premium

    VOCs Fugitive emissions detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threats

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    High quality gas sensor solutions for mining

    Fast, accurate and reliable measurement of CH4. The extraction of coal releases methane gas, which can mix with the air in a mine to form a hazard due to its flammability. Ventilation with fresh air from the surface is used to dilute the methane and reduce the risk of explosion. Monitoring of the methane content of the stale air exiting the mine allows the amount of ventilation to be controlled. Although our sensors are not ATEX approved for use in potentially explosive atmospheres they are suitable for monitoring air containing methane concentrations below the lower explosive limit. Our OEM products can be built into equipment which is approved for use in the monitoring of mine exhaust gas and similar applications.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Gas detection analyzers for storage

    Flammable & combustible liquids are found in virtually every industrial plant. The quantities of these can vary from a few ounces in aerosol cans to several thousand gallons in bulk storage tanks. The principal hazard associated with storage is the accidental discharge or release of the flammable or combustible material into the surrounding area.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Aluminium coverage for petroleum

    CST Covers domes help operators achieve regulatory compliance and bring new levels of cost efficiency to storage facility operations. By helping control hazardous vapor emissions and preventing water intrusion, our domes provide environmental and stored product protection and reduce lifetime maintenance and operating costs. The unique CST Covers dome can also be designed to withstand pressure required in certain difficult applications.

    By CST Industries Inc based in Gardena, CALIFORNIA (USA).

  • Gas detection for the winery and brewery Industry

    Once an archetypal example of manual production, the winery and brewery industries now incorporate sophisticated processes to ensure high quality levels and efficient output. In some cases traditional approaches have simply been scaled up or put under more stringent monitoring, whilst in others innovations such as nitrogen-pressurised canning have been introduced. However, whichever approach has been followed there is also a growing realisation of the gas hazards that are associated with both new and old processes, and the need to protect workers from toxic gas exposure and asphyxiation risks.

    By Crowcon Detection Instruments Ltd - a Halma company based in Milton Park, UNITED KINGDOM.

  • Gas detection analyzers for processing ovens & dryers

    Many industries are involved in coating products with solvent-borne materials and then employing ovens or dryers to remove the solvents from the finished product. The key hazard is an explosion from the build up of solvent vapors in the oven or dryer atmosphere. This buildup could occur by a malfunction in the production process such as: a sudden or improper amount of coating, a change in ventilation controls or excessive speed. In any of these cases, the concentration of flammable vapor has an opportunity to rise above safe levels, creating a potentially explosive mixture of vapor in air.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Gas detection analyzers for chemical & pharmaceutical processes

    Chemical and pharmaceutical facilities use a variety of hazardous gases and solvents in their production processes. Whenever these substances are transported, processed or stored, the potential risks are high for hazardous conditions. These substances must be continuously monitored to protect personnel and facilities from accidental releases or leakage. Our various lines of hazardous gas monitoring systems benefit the chemical and pharmaceutical industry in the following applications.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Flares for Safe Disposal of Waste & Toxic Gases

    Our Flares are versatile in design & suitable for total destruction of waste gas/vapours. The waste gases/Vapours from petrochemical, WWTP, chemical plants have very high potential for environmental hazards. If allowed to released unburned into atmosphere. SIES offers flares and combustion systems for safe disposal of gases with high efficiency and reliability. System Designed to meet the API 521/537 norms High efficiency Burners with up to 99% thermal destruction Flares operable on fully automated, SCADA based solutions Customized & Cost effective project specific solutions Successful Installations of various types of flares at various locations.

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Hydroxyl Number in Polyols (OH#) #3013

    The use of polymeric polyols is commonplace in the manufacturing of polyurethanes and other specialty polymers. The hydroxyl number (OH#) is a measure of the concentration of the hydroxyl groups on the polyol. This is an important parameter to monitor and control during polyol production. The laboratory method that is commonplace for hydroxyl number determination is both time consuming and involves the use of hazardous materials. This note will discuss the use of Guided Wave hardware and software tools for the measurement of hydroxyl number in polyols using fiber optic-based, Near-Infrared (NIR) spectroscopy. NIR can be applied in real time directly in process or as a laboratory procedure. In either case NIR is a time and money saving alternative to traditional methods. NIR also offers the benefit of increased safety over traditional methods. For well established process measurements, a Guided Wave ClearView® db multi-wavelength photometer can be used to achieve similar results.

    By Guided Wave Inc, based in Rancho Cordova, CALIFORNIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you