gas monitoring Applications
-
PremiumGas monitoring and dust monitoring for the natural gas industry
By NEO Monitors AS based in Skedsmokorset, NORWAY.
-
Premium
Inert gas monitoring
By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA).
-
-
calibration gas
By AG Gases Ltd based in Stoke-on-Trent, UNITED KINGDOM.
-
Gas and particulate monitoring for vehicles
By Enviro Technology Services Ltd based in Stroud, UNITED KINGDOM.
-
Premium
Gas monitoring and dust monitoring for the powerplants industry
LaserGas measurements
- Boiler combustion control, O2 and CO
- DeNOx system, NH3 and NO
- Electrostatic precipitators (ESP), CO monitoring for explosion prevention
- Stack gas emissions, NH3, H2O, NO
- Coal silos, CO monitoring for explosion prevention and detection of smouldering fires (only in coal fired plants)
LaserDust measurements
- Stack gas emission
- Coal silo, explosion prevention
By NEO Monitors AS based in Skedsmokorset, NORWAY.
-
Premium
Gas monitoring and dust monitoring for fertilizer industry
By NEO Monitors AS based in Skedsmokorset, NORWAY.
-
Premium
Gas monitoring and dust monitoring for the boilers
By NEO Monitors AS based in Skedsmokorset, NORWAY.
-
Premium
Gas monitoring and dust monitoring for the enviromental industry
By NEO Monitors AS based in Skedsmokorset, NORWAY.
-
Premium
Gas monitoring and dust monitoring for the nickel industry
By NEO Monitors AS based in Skedsmokorset, NORWAY.
-
Premium
Monitoring solutions for the flue gas desulphurisation
Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the plant.
By Codel International Ltd based in Bakewell, UNITED KINGDOM.
-
Wet gas monitoring for refineries
Thermal mass flow meters provide excellent measurement capabilities in dry gas flows. They have proven durability, accuracy, and repeatability. However, thermal flow meters are sensitive to liquid droplets in a wet gas stream. For a thermal flow meter to work accurately in a condensing gas environment, the probe must be placed far enough downstream so that the entrained water has condensed onto the pipe wall. In a very wet environment, any condensing liquid (commonly referred to as mist or fog) contacting the sensor probes causes a high reading due to the liquid vaporizing on the heated portion of the sensor. As a result of this deficiency, measurements with conventional thermal meters are largely ignored when moisture levels rise because there is no confidence that the measurements are true.
By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).
-
Premium
Gas monitoring and dust monitoring for the coke-oven gas
By NEO Monitors AS based in Skedsmokorset, NORWAY.
-
Gas monitoring and dust monitoring
By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA.
-
Oil and gas pipeline monitoring
By fibrisTerre Systems GmbH based in Berlin, GERMANY.
-
Premium
Gas monitoring and dust monitoring for refinery industry
By NEO Monitors AS based in Skedsmokorset, NORWAY.
-
Premium
Gas monitoring and dust monitoring for the refinery industry
By NEO Monitors AS based in Skedsmokorset, NORWAY.
-
Premium
Gas monitoring and dust monitoring for the LNG industry
By NEO Monitors AS based in Skedsmokorset, NORWAY.
-
PremiumGas analysis & monitoring system for gas purity
The purity of a gas is an indication of the amount of other gases contained in it. A high purity refers to a low amount of other gases. High purity gas are considered to be of better quality and are generally more expensive. The purity of the gas can be expressed as a percentage or as a decimal fraction. Applications for checking the purity of the gases across different industrial sectors by air separation plants, cryogenic facilities, the quality control of industrial gases to the steel mills, etc.
By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.
-
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you