Only show results available in Virginia? Ok

gas monitoring equipment Applications

  • Gas chromatography for laboratories

    By F-DGSi based in Evry Cedex, FRANCE.

  • Gas spectroscopy for laboratories

    By F-DGSi based in Evry Cedex, FRANCE.

  • Gas control equipment for Life Science

    QCAL introduces CO2Control for incubators and test chambers. These gas dosing units can be adapted to nearly every incubator or test chamber. The user can set a CO2 concentration up to 30% vol. CO2. The CO2Control measures the actual concentration and adds CO2 from a CO2 gas container. The NDIR CO2-sensor has an excellent long-term stability, which provides years of stable CO2 measurement. Also the other parts as the sample gas pump, valve and fittings are designed for maintenance-free use over years. Humidity effects are compensated upto 95% rh at 37°C, also temperature effects are automatically corrected upto 50°C. The other way to control gas atmospheres in any life science equipment is to use gas mixing units GMS_2CH ( 2 channels ) or GMS_3CH ( 3 channels ) for N2, O2 and CO2. They can match flowrates up to 80 liters per minute with a concentration range up to 100 Vol% O2 and/or CO2.

    By QCAL Messtechnik GmbH based in Oberostendorf, GERMANY.

  • Premium

    Gas analysis & monitoring system for semiconductor

    The Cleanroom is a combined laboratory chemical, mechanical and / or electronic whose main characteristic is the presence of very pure air, that is a very low content of fine dust in suspension. In the process of semiconductor production, the airborne particles (micro-powder) go to irreparably damage the micro-photoetched that form the chip, creating an electronic circuit defective, and then discarded. This process has forced the improvement of industrial production environments, removing particles from the air, for two purposes: to increase the efficiency of production, increasing the yield of quality, and requirement of the manufacturer (of course based on the demand of the market) in shrink increasing the area of etching of semiconductors (just think of the USB storage media in a few years, went from 16 MB to 16 GB without changing the external dimensions).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    High technology gas generators for laboratory industry

    Laboratory.

    By Leman Instruments SAS based in Archamps, FRANCE.

  • calibration gas

    calibration gas , British specialty gases company, with a local North Africa presence. We can supply you with high quality gas mixtures for a wide range of applications including Environmental Monitoring, Gas Detection, Mud Logging, Laser Cutting, and Laboratory Analysis. Our gas mixtures are used in the Oil, Gas and Petrochemical industries Our main focus is to give our customers gravimetrically produced, high precision calibration gas mixtures conforming to ISO 6142, along with a range of high purity gases and pressure control equipment, used for instrumental analysis and gas detection applications. AG Gases' senior management have many years experience in the European and International markets and now offer this knowledge to benefit Egyptian and North African customers.

    By AG Gases Ltd based in Stoke-on-Trent, UNITED KINGDOM.

  • Premium

    Gas Detection

    Gas Detection is our core business, whether portable, colormetric, fixed systems or Hazmat. We do more than get you the equipment you need--we also help you select it, calibrate it, service it and maintain it. Our technicians, our sales reps and top management can speak with authority on the capabilities of our equipment and match it to your specific application. And we are the champions of the one-of-a-kind solution, because we have the know-how and the right tools.

    By Argus-Hazco based in Chesterfield, MICHIGAN (USA).

  • Premium

    Measurement solution for multi-stream combustion research

    Protea supplied a complete turn-key measuring system for multi-point sampling in a University combustion research laboratory. Utilising the latest in FTIR spectroscopy, atmosFIR, a complete cabinet system was supplied containing: atmosFIR FTIR Gas analyser, Sampling System Control Module (SSCM), Heated Stream Selection Module (HSSM), Temperature Control Module (TCM), 4 heated sample lines, 4 heated sample probes, Embedded PC controller.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Thin-film Measurement Technology for Medical Industry

    The medical industry requires the accurate and consistent performance of its equipment. IST’s precise and reliable sensors meet the needs of these applications. Flow is perhaps the most widely used sensor in this industry, controlling medical devices where a gas or fluid is being supplied to a patient, or in cases of patient monitoring. Humidity sensors also have an application in the medical industry in products that control the air present or supplied to the patient.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Air Quality Monitoring Equipment for Sample Handling Industry

    Within the field of gas analysis much time is spent looking at the accuracy and uncertainty in the detection technique. However, without appropriate sample handling, what you are measuring could potentially bear little or no relation to your original sample.

    By Signal Group Ltd based in Camberley, UNITED KINGDOM.

  • Premium

    Gas monitoring instruments and systems for phosgene monitoring

    Phosgene COCl2 is a colorless gas. While it has been used as a Chemical Weapon Agent (CWA) in the past, currently this poisonous gas is also an important reagent in synthesis in the pharmaceutical and chemical industries. The plants using phosgene are typically equipped with gas sensors to detect leaks in the indoor ambient air. The critical situations arise when equipment in contact with the gas at the manufacturing facilities are serviced and maintained. As phosgene is very poisonous, even small gas pockets in serviced equipment may be dangerous to maintenance personnel. Gasmet™ FTIR Gas Analyzers are ideal tools to monitor point sources of phosgene. The measurement technology has high specificity, may be operated continuously, and has a fast response time.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for compressed breathing air

    Compressed breathing air is subject to strict limits of harmful contaminants defined in European standard EN 12021 and various defence standards such as DEF STAN 68-284 issue 3. The testing interval of breathing air compressors and associated equipment is 3 months and gases tested include carbon monoxide, carbon dioxide and oil vapour defined as hexane and heavier hydrocarbons. EN 12021 covers underwater applications including self-contained open circuit compressed gas breathing (SCUBA) and compressed gas line breathing (hard-helmet diving), respiratory equipment used on ground for escaping from toxic atmospheres and for working in contaminated atmospheres. It also covers breathing gas for hyperbaric operations and synthetic air. While EN 12021 does not cover aerospace applications, the British MOD publication DEF STAN 68-284 and its counterparts in other countries cover also the breathing gases used in aviation.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Filtration for Flue Gas Analysis and CEMS

    Three Steps of CEMS: 1st Step: Gas Sampling 2nd Step: Gas conditioning and treatment 3rd Step: Measurement/Calibration In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part. The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance 2, Filtration Grade: usually 2 or 3 micron 3, Temp. is around 0-180 deg C 4, Back flushing gas is heated, impulse flushing 5, Filter Material: Titanium Sintered, SS316L Sintered, PTFE sintered, Ceramic Membrane and so on 2nd Step Gas Treatment: #11;The coarse filters and the liquid particle filters The coarse and fine cartridge can filter the small particles in the gas and acid aerosol things to better protect the instruments. The micron can be 0.1micron, filtration rate can be up to 99.99%, two layers can be 99.9999%

    By Shanghai CMI Environmental Technology Co.,Ltd. based in Shanghai , CHINA.

  • Premium

    Gas monitoring instruments and systems for stack testing according to EPA test method 320

    The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B Performance Specification 15. Gasmet™ Gas Analyzers and Calcmet™ software have been designed to take the requirements of the performance specification into account.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Sampling and drilling equipments for the mining industry

    AMS, Inc. has been a leading provider of high quality sampling equipment since 1942. AMS sampling equipment is primarily used for environmental, geotechnical, and remediation uses as well as soil, soil gas, and groundwater monitoring. In addition, AMS makes PowerProbe direct push/hollowstem auger drill rigs for environmental and geotechnical drilling activities. AMS also manufactures and offers direct push tooling, drilling equipment, accessories, and expendables for soil sampling, groundwater sampling and monitoring well installations.

    By Art’s Manufacturing and Supply, Inc. (AMS Inc.) based in American Falls, IDAHO (USA).

  • HCl Monitoring in Air

    Hydrogen chloride (HCl) is a colorless, sometimes slightly yellow, gas. It is an undesired environmental component that may be damaging to workers and the surroundings. Exposure limits have thus been established by industries to make sure that the workers operate in a safe environment. HCl monitoring is especially required for incinerators, coal-fired power plants, aluminum recycling and cement plants. Unisearch offers a reliable and easy-to-use HCl analyzer – the TDLAS-based LasIR system. Studies have shown that TDLAS equipment provides data that is more accurate than conventional gas monitoring equipment. When calibrated for HCl monitoring, TDLAS is able to detect this gas among other gases present in the area and provide continuous updates with regards to the changes in its concentration.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Air and particule sampling for the oil and gas industries

    Ormantine offers a wide range of products and services to meet the array of different needs that arise in the oil and gas industries. Volatile Organic Compounds (VOCs), benzene, and other compounds are released during drilling, hydraulic fracturing (fracking) and other extraction procedures. Monitor NOx emissions from heavy duty equipment, particulate matter, and ground level ozone, the formation of which is contributed to by VOCs from processing, transportation, and storage of oil and gas.

    By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

  • NH3 Monitoring in Air

    NH3 (Ammonia) is a colorless gas with a distinctive pungent smell. Ammonia monitoring is essential in coal-fired power plants, where NH3 is used to reduce NOx emissions. The ammonia consumes all of the NOx, but its high concentration that is needed for these purposes also starts reacting with other things and in the process can clog up filters and cause premature failure of expensive SCR equipment and pre-heaters. Not to mention that these high levels create an irreparable damage to the environment.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    High quality gas sensor solutions for mining

    Fast, accurate and reliable measurement of CH4. The extraction of coal releases methane gas, which can mix with the air in a mine to form a hazard due to its flammability. Ventilation with fresh air from the surface is used to dilute the methane and reduce the risk of explosion. Monitoring of the methane content of the stale air exiting the mine allows the amount of ventilation to be controlled. Although our sensors are not ATEX approved for use in potentially explosive atmospheres they are suitable for monitoring air containing methane concentrations below the lower explosive limit. Our OEM products can be built into equipment which is approved for use in the monitoring of mine exhaust gas and similar applications.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you