Only show results available in Virginia? Ok

gas monitoring technology Applications

  • Premium

    Water monitoring technology for oil & gas

    Monitoring natural water bodies surrounding oil and gas drilling activities like hydraulic fracturing is a key issue in environmental monitoring and regulatory compliance.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Inspection, Monitoring and Management Technologies for Oil & Gas Industry

    Failures to oil and gas pipelines can have severe environmental consequences and cost billions of dollars to rectify. Because of this, safety regulations governing these pipelines are becoming more stringent and visible.

    By Pure Technologies based in Calgary, ALBERTA (CANADA).

  • Premium

    High technology gas generators for laboratory industry

    Laboratory.

    By Leman Instruments SAS based in Archamps, FRANCE.

  • Premium

    High technology gas generators for air monitoring industry

    Air Monitoring Industry.

    By Leman Instruments SAS based in Archamps, FRANCE.

  • Premium

    Gas analysis & monitoring system for leak searching

    Many chemical compounds and gas are invisible to the naked eye. But there are many companies that make intensive use both during and after the production process. The manner and frequency with which companies are required to monitor, document, report and rectify any escape of volatile gaseous compounds are established by regulations extremely rigid. The technology most widely used is the “Imaging Camera” or “sniffer technology.” “When we look for gas leaks, check all systems in places that may or may not have been previously identified. These controls are carried out regularly and are very important after a shutdown.

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    Gas analysis & monitoring system for greenhouse gases analysis

    The rising levels of manmade greenhouse gases (GHGs) in the atmosphere and their resulting impact on climate is now one of the single biggest technological and environmental challenges facing the world. This makes intensified monitoring of these gases more critical than ever in order to better quantify the role of the numerous natural and manmade sources, sinks and buffers involved in the cycles of GHGs. It also enables us to objectively audit GHG fluxes at the factory, city, country and continental level. Such objective auditing is ultimately essential to facilitate effective enforcement and compliance with any regulations, laws, treaties and trading agreements based on GHG metrics such as carbon footprints.

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Premium

    Gas monitoring instruments and systems for phosgene monitoring

    Phosgene COCl2 is a colorless gas. While it has been used as a Chemical Weapon Agent (CWA) in the past, currently this poisonous gas is also an important reagent in synthesis in the pharmaceutical and chemical industries. The plants using phosgene are typically equipped with gas sensors to detect leaks in the indoor ambient air. The critical situations arise when equipment in contact with the gas at the manufacturing facilities are serviced and maintained. As phosgene is very poisonous, even small gas pockets in serviced equipment may be dangerous to maintenance personnel. Gasmet™ FTIR Gas Analyzers are ideal tools to monitor point sources of phosgene. The measurement technology has high specificity, may be operated continuously, and has a fast response time.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Gas Monitoring and Leak Detection in Underwater Application for the Offshore Oil and Gas

    With over 300 sensors and systems sold world-wide and over 35 scientific users publications, Franatech is market leader for underwater methane detection and monitoring. Franatech is a developer and supplier of sensors for detection of gases in water. The company has more than 15 years experience in subsea applications, working with all kinds of sensing technologies. Coming from a scientific environment and further engaged in long term co-operation with universities and institutions, the company has been involved in several oil and gas projects, piloting the use of point sensors for continuous monitoring of gas leakages.

    By Franatech GmbH based in L√ľneburg, GERMANY.

  • Premium

    Thin-film Measurement Technology for Medical Industry

    The medical industry requires the accurate and consistent performance of its equipment. IST’s precise and reliable sensors meet the needs of these applications. Flow is perhaps the most widely used sensor in this industry, controlling medical devices where a gas or fluid is being supplied to a patient, or in cases of patient monitoring. Humidity sensors also have an application in the medical industry in products that control the air present or supplied to the patient.

    By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

  • Measurement solution for FTIR Vs. GC in gas analysis

    Comparison of Technologies

    A gas chromatograph (GC) has traditionally been the technology of choice for laboratory analysis of gas samples. GCs have been used for over 50 years in the qualification and quantification of complex mixtures of gases. The techniques and methodology required to run GCs are often a pre-requisite for any laboratory technician. Recent developments in Fourier Transform Infra-Red (FTIR) gas analysis has enabled this technology to start to replace GCs in the lab.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • O2 Monitoring in Air

    Oxygen (O2) is a colorless odorless gas, essential to all life on Earth but damaging in high concentrations. An O2 analyzer should thus be employed for safety management and air pollution prevention purposes. LasIR MP110 is perfect for continuous emission monitoring of O2. It is based on TDLAS technology and can be calibrated as an O2 analyzer, providing accurate and reliable measurements. It quickly responds to changes in compound concentration, thus providing continuous emission monitoring for the specified gas.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    Monitoring solutions for the flow combustion efficiency areas

    Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and Crematoriums.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Premium

    Perimeter Ambient Air Monitoring

    Cerex Multi-Gas Open Path Analyzers are available in both FTIR and UVDOAS technologies to meet specific requirements for perimeter ambient air quality monitoring, leak detection, fugitive emissions monitoring and ambient air quality monitoring. Cerex multi-gas analyzers offer significant advantages over single gas analyzer arrays, electro-chemical sensor arrays and time integrated air sampling hardware

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Gas Permeation Analysis

    Dissolved Species Analysis Dissolved species analysis employing Hiden's high sensitivity membrane sampling technology for analysis of respiratory gases, hydrocarbons and sulphides is applied to a wide range of application areas including: Ecolological studies in sea water Bio fuel production from algae Pollution monitoring in river, estuary and reservoir waters Soil core analyses Fermentation

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Premium

    Raman Spectrometry for the Oil & Gas Industry

    Increasing regulations and specifications for fuel quality, compliance and the need to detect calamities as quickly as possible underlined the importance of on-line analyzers. Since more than 10 years AppliTek has acquired a considerable expertise in the advice, design and implementation of on-line analyzers and complete monitoring systems in the oil and gas sectors. These systems are built by specialists with a proven track record in oil processing and refining and know where your expectations lie. A growing portfolio of products and turnkey solutions is your key to higher production efficiency, cost control and finally your competitive advantage.

    New technologies such as Raman spectrometry pave the way to new monitoring systems for quality control and process control.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Tunnel solutions for the gaseous pollutants

    The TunnelTech 200 series are primarily gas monitors with optional Visibility capability. Most use Infra-red absorption technology to monitor gaseous pollutants and those with a visibility channel use optical attenuation for that application. All TunnelTech 200 analysers except the TunnelTech 205 use the same rugged corrosion resistant enclosures and have an optional Data Display unit. As there is only one moving part so reliability levels are very high and maintenance levels very low.

    By Codel International Ltd based in Bakewell, UNITED KINGDOM.

  • Gas Detection Solutions for Carbon Fiber Manufacturing Industry

    The carbon fiber manufacturing industry requires a unique process control solution that conventional gas detection technology lacks. Boreal Laser’s line-of-sight laser based gas detection system is the perfect fit for measuring HF in various pan oven applications and stack emissions monitoring . Whether you are looking for gas detection solutions for safety, environmental or process control needs Boreal Laser has you covered.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Biogas Monitoring for the Renewable Energy Industry

    AppliTek`s solutions in this field concentrate on the process efficiency of anaerobic digesters. Many existing digesters give unnecessary problems, which arise due to inadequacies in the process or process control system. AppliTek has developed a unique instrument to measure and control the key processes in the anaerobic fermentation. Compact gas analyzers with proprietary technology can be implemented to check the biogas yield.

    Parameters: Volatile Fatty Acids - Alkalinity - pH - Bicarbonate

    Gas parameters: CH4 - CO2 - O2 - H2S

    By AppliTek NV based in Nazareth, BELGIUM.

  • Measurement solution for HF emissions from brickworks

    Brick kilns, as well as other plants such as ceramics manufacturers and fertiliser producers, are a major producer of hydrogen fluoride (HF) emissions. HF is highly reactive gas and seriously damaging to human health, so has strict emissions limits imposed by legislation. In addition to the effects to humans, emissions have been found to damage crops and fruit trees, as well as the general environment. The brick industry strives to reduce the amount of HF emissions and numerous projects have been carried out into the research and development of proposed process modifications that introduce ways to reduce hydrogen fluoride emissions via the latest technology such as filters and scrubbers.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    High quality gas sensor solutions for horticulture

    Ensuring reliable and accurate carbon dioxide measurement. With accurate and reliable carbon dioxide monitoring being an important part of horticultural climate control, Edinburgh Sensor’s Guardian range includes dual wavelength non-dispersive infrared sensor technology with built-in temperature correction. This ensures reliable and accurate carbon dioxide measurement together with long term stability.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you