Only show results available in Virginia? Ok

gas storage Applications

  • Gas Production and Storage

    Hiden's gas analysers provide for high sensitivity analysis of gases and vapours from gas production and storage facilities. Gas analysers provide for: Bottled gas quality assurance Diving gas monitoring Medical gas Semiconductor gas

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Gas detection analyzers for storage

    Flammable & combustible liquids are found in virtually every industrial plant. The quantities of these can vary from a few ounces in aerosol cans to several thousand gallons in bulk storage tanks. The principal hazard associated with storage is the accidental discharge or release of the flammable or combustible material into the surrounding area.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Premium

    High quality gas sensor solutions for Controlled Atmosphere (CA) storage

    Precise regulation of O2, CO2 and N2 concentrations. A controlled atmosphere is an agricultural storage method in which the oxygen, carbon dioxide and nitrogen concentrations are regulated. The humidity and temperature are also controlled, resulting in a slow loss of quality during prolonged bulk storage of products such as apples, pears, grains, legumes, etc.

    By Edinburgh Instruments Ltd based in Livingston, UNITED KINGDOM.

  • Premium

    Water Storage for the Crude Oil Industry

    Superior Tank Co., Inc. manufactures Bolted Steel Tanks and Welded Steel Tanks specifically designed for the oil industry. Bolted steel tanks are tailored to the strict requirements of oil storage and API 12B Standard with capacities from 100 to 10,000 BBL. Coatings and accessories are specifically designed for the oil and petrochemical industry. Flat panel Bolted Steel Tanks are also available for oil storage.

    By Superior Tank Co., Inc. based in Rancho Cucamonga, CALIFORNIA (USA).

  • FoamFatale Storage Tank Fire Suppression System

    Welcome to the new era of tank fire protection! Discover FoamFatale's breakthrough automatic, AFFF Self-Expanding Foam System (SEFS) for cone roof, internal floating roof and open-top floating roof tanks. No need for proportioner, aspirating device, foam chamber, pourer, just pure fire suppression even for the full surface of a large scale open-top floating roof tank.

    By FoamFatale Greece Ltd. based in Thessaloniki, GREECE.

  • Cloud software solutions for bulk petroleum storage

    Mitigate regulatory risk. Run your AST facilities at peak efficiency. Bulk petroleum facilities face onerous environmental demands. Demands that if not met consistently and with precision, could cost you tens of thousands of dollars per day and even threaten to hobble your operation. Titan automates even the most thorny areas of AST regulatory compliance, from spill prevention and ground water protection, to alarm monitoring and testing that meets API standards. So you`ll be on top of every test & inspection date, every critical document and equipment spec, and every maintenance activity to ensure your business keeps pace with its opportunity for growth.

    By Titan Cloud Software Company, LLC based in Brentwood, TENNESSEE (USA).

  • Premium

    Underground storage leak monitor for refineries

    By Arjay Engineering Ltd. based in Oakville, ONTARIO (CANADA).

  • Flaring Solutions for the Upstream Oil & Gas Industry - Tank Batteries/Storage Tanks

    The EPA mandates that all upstream oil and gas operators install factory-certified combustors that meet new Quad O compliance standards, or perform field testing on the flare system post-installation. ABUTEC offers the only compliance-ready combustors available to the market, making expensive testing no longer necessary for our customers. The use of enclosed combustors is an integral piece of the extraction process and affords companies the opportunity to operate in extreme conditions while still maintaining low emissions and following Quad O regulations.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Premium

    Carbon capture and storage (CCS) applications

    Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of both nitrogen and sulfur (NOx and SOx). Next the purified gas is passed through an absorption column filled with the chemical scrubbing solvent. The solvent reacts with the carbon dioxide and selectively absorbs it from the gas stream. When CO2-rich solvent is heated, the carbon dioxide is released as a nearly pure gas.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Nitrogen Generation for Gas Blanketing

    When you need gas blanketing or tank padding for your storage tanks and containers, our team at Gas Control Systems can help. Our gas blanketing nitrogen generator offering can meet all of your needs. When it comes to gas blanketing, nitrogen is usually the best option. It can be used in a variety of situations including in tanks that are storing chemicals or hydrocarbons. The nitrogen will help reduce your oxygen content in your storage tanks or containers to a safe level.

    By Gas Control Systems, Inc (GCS) based in Sparta, MICHIGAN (USA).

  • Continuous emissions monitoring for carbon capture and storage

    The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few mg/m3. 

    By Enviro Technology Services plc based in Stroud, UNITED KINGDOM.

  • Premium

    Agitation and mixing solutions for oil & gas

    The two main areas in the oil and gas market are upstream operations such as exploration, recovery, storage, and transfer and downstream refining operations.  Exploration for oil and gas includes offshore drilling rigs and land rigs.  Downstream production includes the cracking of oil into transportation and fuel products and a variety of petrochemicals.

    By National Oilwell Varco based in Dayton, OHIO (USA).

  • Microbial testing in upstream oil & gas industry

    On-the-spot measurement of total microorganisms! Microbial growth can be a significant nuisance in the upstream oil and gas sector. Well drilling, completion and stimulation activities can introduce microbes into a producing formation. Microbes found in the near well bore of producing wells can impede inflow, corrode tubulars and pumps and sour the formation. At the surface, production problems associated with microbial infection include corrosion and fouling of wellheads, pipelines, heater treaters, separators and storage tanks and bullets. The best solution to these problems is early detection and treatment.

    By LuminUltra Technologies Ltd. based in Fredericton, NEW BRUNSWICK (CANADA).

  • Air and particule sampling for the oil and gas industries

    Ormantine offers a wide range of products and services to meet the array of different needs that arise in the oil and gas industries. Volatile Organic Compounds (VOCs), benzene, and other compounds are released during drilling, hydraulic fracturing (fracking) and other extraction procedures. Monitor NOx emissions from heavy duty equipment, particulate matter, and ground level ozone, the formation of which is contributed to by VOCs from processing, transportation, and storage of oil and gas.

    By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

  • Premium

    Odor control for tank cleaning

    When it comes to odor management, simply cleaning the tank isn’t enough to remove the odors. Prior to cleaning, storage tanks are vented to the atmosphere in order to reduce the internal gas content to a level below its lower explosion limit (LEL). This permits safe worker access. During venting, odors escape into the atmosphere creating a nuisance to nearby residents, businesses, and employees. Furthermore, storage tank cleaning results in production downtime that reduces plant profitability.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Premium

    Oil Spill Bioremediation

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Aluminium coverage for petroleum

    CST Covers domes help operators achieve regulatory compliance and bring new levels of cost efficiency to storage facility operations. By helping control hazardous vapor emissions and preventing water intrusion, our domes provide environmental and stored product protection and reduce lifetime maintenance and operating costs. The unique CST Covers dome can also be designed to withstand pressure required in certain difficult applications.

    By CST Industries Inc based in Gardena, CALIFORNIA (USA).

  • Dustless Lead Paint Removal & Nuclear Decon Tools for Power, Oil and Gas Industry

    Pipelines, large fuel storage tanks, transformer pads and countless power generating systems have been decontaminated and prepared for a fresh coat of paint in one step! There is no costly containment to setup before starting the job or additional cleanup after it’s done, because our shrouded power tools capture dust before it’s emitted. Our powerful HEPA vacuum deposits hazardous waste directly into a 55-gallon drum, safely sealed and ready for transport when full.

    By Pentek Inc. based in Coraopolis, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you