Only show results available in Virginia? Ok

gas storage system Applications

  • FoamFatale Storage Tank Fire Suppression System

    Welcome to the new era of tank fire protection! Discover FoamFatale's breakthrough automatic, AFFF Self-Expanding Foam System (SEFS) for cone roof, internal floating roof and open-top floating roof tanks. No need for proportioner, aspirating device, foam chamber, pourer, just pure fire suppression even for the full surface of a large scale open-top floating roof tank.

    By FoamFatale Greece Ltd. based in Thessaloniki, GREECE.

  • Flaring Solutions for the Upstream Oil & Gas Industry - Tank Batteries/Storage Tanks

    The EPA mandates that all upstream oil and gas operators install factory-certified combustors that meet new Quad O compliance standards, or perform field testing on the flare system post-installation. ABUTEC offers the only compliance-ready combustors available to the market, making expensive testing no longer necessary for our customers. The use of enclosed combustors is an integral piece of the extraction process and affords companies the opportunity to operate in extreme conditions while still maintaining low emissions and following Quad O regulations.

    By ABUTEC LLC based in Kennesaw, GEORGIA (US) (USA).

  • Nitrogen Generation for Gas Blanketing

    When you need gas blanketing or tank padding for your storage tanks and containers, our team at Gas Control Systems can help. Our gas blanketing nitrogen generator offering can meet all of your needs. When it comes to gas blanketing, nitrogen is usually the best option. It can be used in a variety of situations including in tanks that are storing chemicals or hydrocarbons. The nitrogen will help reduce your oxygen content in your storage tanks or containers to a safe level.

    By Gas Control Systems, Inc (GCS) based in Sparta, MICHIGAN (USA).

  • Premium

    Gas analysis & monitoring system for semiconductor

    The Cleanroom is a combined laboratory chemical, mechanical and / or electronic whose main characteristic is the presence of very pure air, that is a very low content of fine dust in suspension. In the process of semiconductor production, the airborne particles (micro-powder) go to irreparably damage the micro-photoetched that form the chip, creating an electronic circuit defective, and then discarded. This process has forced the improvement of industrial production environments, removing particles from the air, for two purposes: to increase the efficiency of production, increasing the yield of quality, and requirement of the manufacturer (of course based on the demand of the market) in shrink increasing the area of etching of semiconductors (just think of the USB storage media in a few years, went from 16 MB to 16 GB without changing the external dimensions).

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit into your power plant’s specific needs. Vac-Con Truck mounted Industrial vacuum systems are equipped with large storage debris tanks with self-cleaning intake filter systems. The Industrial Trucks vacuum the waste products through existing manifold piping or with hoses attached directly to the debris tank. When fully loaded, the truck can then drive directly to the disposal site and discharge the waste products. The Industrial Truck offers a great amount of flexibility of operation and can be utilized anywhere in your facility for many different types of normal and emergency maintenance operations. The Vac-Con Industrial Vacuum Truck can be utilized on both wet and dry materials. The same Vac-Con truck can be used for removing Fly Ash from your plant, coal from broken intake belt conveyors, or used to suck wet muddy material from storage lagoons. The Vector Trailer mounted Vacuum Systems are designed to be used in several locations around power plants. The Trailer mounted Vacuum Systems connect to Manifold piping located in key areas within your power plant. The Vacuum systems move the waste products from the plant and deposit these products into moveable storage containers. The loaded storage containers when full can then be moved to the disposal sites for discharge. Vector Static Mounted Vacuum systems are designed to vacuum and remove Fly Ash and other bulk waste products through manifold piping from operational areas of the plant and deposit these waste products into collection storage silos for later transport to disposal sites. The fixed vacuum systems are electric motor driven and are normally installed as a permanent addition to in-plant existing conveying systems. Please contact us with any requirements you may have. We will evaluate your request and respond with solutions specific to solve your problems and fit your needs.

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Pulsair`s industrial mixers for oil & lubiricants industry

    Pulsair Systems can custom design a system that mixes and blends tanks of virtually any tank size or configuration. No application is too large or too small. Our fast, efficient and economical Pulsair mixers can give you substantial savings on both electricity and compressed air. Our control systems can operate either single or multiple tanks. Whether it`s blending lubricants, mixing base stock and additives, thinning heavy emulsions or keeping storage tanks at a constant temperature, Pulsair Systems` technology has proven to be dramatically better. Our systems blends lubricants to specification usually within 30 minutes of adding all the ingredients used in your recipe. The result is a greater profit margin for you, the operator.

    By Pulsair Systems, Inc based in Bellevue, WASHINGTON (USA).

  • Nitrogen Generator Specialty Beverage Systems

    The importance of the right nitrogen generation system for beverage storage, CO2 mixing, transporting, and dispensing to your end users can’t be overstated. That’s why it is critical to work with the right company to supply you with the best nitrogen generation beverage system in the industry, and that’s Gas Control Systems.

    By Gas Control Systems, Inc (GCS) based in Sparta, MICHIGAN (USA).

  • Premium

    Applications and Air Pollutants Removed in the Petroleum/Petrochemical Industry

    Scrubbing of Hydrogen sulfide, mercaptans and other organosulfur compounds from sour gas and other sources. Proprietary regenerative scrubbing chemistries for hydrogen sulfide removal with sulfur production. By-product production systems for producing sodium hydrosulfide (Nash) from hydrogen sulfide. Sulfur dioxide scrubbing. Recover catalyst dust from FCC units. HCL storage tank vent scrubbing. Removal of HCL and particulate from thermal oxidizers burning chlorinated plastics. Marine drilling platforms sulfur dioxide thermal oxidizer emissions.  Asphalt plant scrubbers and hydrogen sulfide emissions from holding tanks. Pilot plant scrubber systems for hydrogen sulfide. Removal of halogenated and sulfur bearing gaseous compounds from high temperature thermal oxidizers and drilling platforms waste. Well drilling hydrochloric acid storage tanks.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Applications and Air Pollutants Removed in the Chemical, Pharmaceutical and Plastics Industries

    Supplying for over 35 years reliable air pollution control equipment and systems for removal of all gaseous compounds, particulate and odors from chemical process operations, reactors, dryers, calciners, membrane cells, pharmaceutical reactors and tablet dryers, crystallizers, vessel filling and storage vent emissions, emergency scrubbing of high concentration gas releases from cylinders, vacuum pump emissions, Quench /scrubber systems for acid gases and particulate from high temperature thermal oxidizers.  Gaseous emissions from piloting operations and research lab hoods. Specialty NOx abatement for explosives manufacturing and other process operations. Recovery and re-concentration of acids and other gaseous contaminants including by-product production.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Premium

    Measurement of ethylene oxide for monitoring workplace exposure limits

    The Series 8900 Ethylene Oxide Analyzer combines the selectivity of gas chromatography with the sensitivity of a Photoionization Detector (PID) providing interference free response to Ethylene Oxide (EtO) at levels below 0.05 ppm. This analytical method is referenced in OSHA`s `Occupational Exposure to Ethylene Oxide: Final Standard` 29 CFR Part 1910. The system documents exposure levels including: time-weighted averages (TWA), short-term exposure limits (STEL) and instantaneous alarms. Areas that are typically monitored include; EtO Sources - gas storage areas, sterilizer doors, aeration doors, and the General Work Area - decontamination, packaging and preparation and sterile product storage areas.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Biogas to Elecricity

    The range of supply of biogas to electricity solutions is from 10 kW to 1 MW. All the components of the solution are provided with matching capacities. It comprises the biogas digester system of the desired capacity, gas storage, biogas cleaning system to get rid of H2S from the gas, and the biogas genset. In the digester system, one may have a pre-digester or a feed mixing chamber or both. On the post-digester side, liquid from the slurry is separated and is recycled for feed preparation. It reduces the overall fresh water demand of the scheme. The digester itself may be temperature controlled and the input for the same could be given from heat recovery of the genset or from a solar heating system or from any other heat source as the case may be.

    By Kirloskar Integrated Technologies Limited based in Kothrud, INDIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you