Only show results in Virginia? Ok

gas treatment technology Applications

  • Environmental technology for water treatment industry

    In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification.  Further applications are: Diluting and conveying acids and lye during the process of regenerating ion exchangers.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Gas detection analyzers for wastewater treatment industry

    Regulations prohibit facilities from discharging flammable or explosive wastes from their processes into the wastewater collection system. These wastes are not only a fire and explosion hazard but they can also effect the efficient and effective operation of the treatment facility. PrevEx Flammability analyzers are used to continuously monitor the waste stream for flammable gases and vapors. Their unique design and operating technology make them the ideal analyzers for the harsh conditions found in the sewer environment.

    By Control Instruments Corporation based in Fairfield, NEW JERSEY (USA).

  • Effluent wastewater treatment for refineries

    Aquatech has experience working with refinery effluent pollutants in the refinery market and offers the advanced petroleum wastewater treatment and recovery technology necessary for the refinery’s needs.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Water Disinfection for Oil and Gas Water Treatment

    Economic, environmental and operational demands challenge drilling operators to produce results in a highly regulated and competitive environment. MIOX chemical generators offers an efficient, effective, low cost solution for treating high volumes of water and achieve a superior bacterial kill. And because MIOX technology operates with salt, water and electricity, there are virtually no health, safety or environmental concerns at the drill site or down-hole.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Enhanced oil recovery treatment for oil and gas industry

    Enhanced Oil Recovery (EOR) is a broad O&G Industry term, but almost always involves some kind of water treatment processes. Whether you are trying to increase injectivity, kill bacteria, break emulsions or destroy polymers, MIOX has equipment to help. MIOX’s exclusive Mixed Oxidant technology turns your EOR site into an on-demand chemistry factory - eliminating middle men and lowering costs.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Frac water treatment for oil and gas industry

    Economic, environmental and operational demands challenge Hydraulic Fracturing (frac) operators to produce results in a highly regulated and competitive environment. Our mobile MIOX frac water unit offers an efficient, effective, low cost solution for treating high volumes and high rates with superior bacterial kill. And because MIOX technology operates with salt, water and electricity, there are virtually no health, safety or environmental concerns at the drill site or down-hole.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Disposal wells treatment for oil and gas industry

    Treating the water being injected for disposal is not always considered by operators. This is likely costing you money in the long run. Removing iron, heavy metals, and treating out ammonia is a benefit to treating with MIOX’s mixed oxidant solution. While these are benefits of the technology, the most important is the elimination of bacteria which can cause Hydrogen Sulfide (H2S), corrosion pitting, poor injectivity and other problems, resulting in great well workover frequency. Treating injection wells does not need to be expensive, and can be treated as you inject.

    By MIOX Corporation based in Albuquerque, NEW MEXICO (USA).

  • Waste gas treatment for the LED industry

    Market analysts predict sustained growth in demand in the LED industry. After LED backlighting for the small LC displays of mobile phones and the LC displays of larger screens in the television market, the next potential growth market is the lighting industry: Sales of LEDs in this market in 2012 are almost USD 3.5 billion – thus nearly doubling since 2010. Analysts are expecting a growth of more than USD 7 billion in 2014 and believe that the total market for LEDs should peak at USD 17.7 billion.* A mass market of this scale for LEDs also means increasing emissions that need to be abated by specific waste gas treatment systems at the point of use. In the manufacture of products based on innovative light emitting diode (LED) technology, ammonia and hydrogen are used in large quantities as process gases. The environmental engineers at DAS have recognised this market trend and developed new solutions such as LARCH for waste gas treatment in MOCVD processes.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Evaporators technology for oil & gas industry

    The oil & gas industry faces water and wastewater treatment specific challenges. EVALED evaporators represent an effective solution for both downstream (onshore and offshore) and upstream plants, allowing ZLD (Zero Liquid Discharge).

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Premium

    Chemical water treatment for refinery

    Deposits and corrosion as well as undesired emulsion, foam and toxic gases impact the operation and the occupational safety in refineries. Kurita provides tailored treatment concepts to increase the operational and the occupational safety. Our product lines and technologies are based on decades of experience in process treatment and they contribute to reduce your total operating costs.

    By Kurita based in Ludwigshafen, GERMANY.

  • Oil Water Separation / Water Treatment - Chemical Reduction

    Adding Wilsa ElectroWaveTM technology to existing separation or water treatment can help reduce or eliminate chemical use. The Wilsa Effect can often take the place of surfactants, demulsifiers, sacle inhibitors and biocides to enhance separation and clarification.

    By Hudson Industries based in Vienna, OHIO (USA).

  • Waste gas & wastewater treatment for the solar industry

    Generating solar energy is considered `green technology`, even though the production of solar cells based on silicon predominantly uses process stages that have been common practice in the semiconductor industry for many years. As in the semiconductor industry the production of solar cells employs dangerous and environmentally harmful substances, which require abatement according to legal provisions. The production of photovoltaic cells therefore is subject to strict requirements for treatment of waste gases and wastewater. Solutions need to be easy and cost-effective. The contaminated wastewaters and waste gases should, under no circumstances, lower performance, endanger the health and safety of humans, or otherwise negatively affect the availability of production facilities. The safety of the production line must be guaranteed at every step and in every operating situation.

    By DAS Environmental Expert GmbH based in Dresden, GERMANY.

  • Premium

    Oily Waste

    Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry® technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment. Find more information and the benefits of VacuDry® oily waste plants on

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Drill Cuttings

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the drill cuttings. Our VacuDry® technology is designed to safely separate oil, water and mercury from the solids (including NORM), allowing reuse of the oil and safe disposal of the water, mercury, solids and NORM. Find more information and the benefits of VacuDry® drill cuttings plants on

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium


    MEGTEC TurboSonic provides custom-designed atomizing technologies and air pollution control solutions for the non-ferrous metallurgical industry including Aluminum, Copper, Nickel, Zinc and precious metals producers. SoniCool™ Evaporative Gas Cooling & Conditioning controls high-temperature furnace and converter off-gases, lowering them to temperatures below other spray technologies—without wetting problems. By lowering the temperature and conditioning the gas stream, SoniCool™ protects downstream equipment from damage and improves the efficiency of downstream APC equipment, such as baghouses and electrostatic precipitators.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium


    Durable regenerative thermal oxidizer (RTO) technology is at the core of our systems. MEGTEC designs and engineers system solutions to meet your special requirements, ranging from energy-efficient treatment of dilute volatile organic compound (VOC) flows, such as tank ventilation, to demanding applications utilizing VOC energy for secondary heat recovery; for example, in the form of process streams. This can include pre- and tail gas treatment systems, and could handle hazardous components such as sulphurous or chlorinated hydrocarbons. For special requirements, we can offer FTO (flameless thermal oxidation) and we can design systems operating safely on oxygen contents below 5%.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Water treatment for power plants

    The process of electricity generation from fossil fuels such as coal, oil and natural gas is water-intensive. Between 40-50% of all water abstracted and used in developed countries is used in the generation of electricity. Thus, a reliable, abundant and predictable source of raw water supply to a power plant is a critical factor in site selection. Water supplies are required to provide various process waters for the following essential main purposes such as make-up water, cooling water for steam turbine condensers, and auxiliary plant cooling water.

    The primary application of modern water treatment technology is to maintain the integrity and performance of the power plant. Critical plant applications have water purity or conditioning requirements that must be adhered to for safe, reliable and efficient power generation.

    Experience has shown that integration of water technology treatments with power plant design can be very important in reducing operational problems and component failures 

    At power plant worldwide there are increasing limitations on water availability and environmental restrictions on discharges. This is expected to promote measures for water conservation and to have an increasing influence on water treatment decisions. At power plant, the recycling of internal wastewater streams can extend from the recovery of individual high-quality waste streams, which can be reused either directly or after only limited treatment, through to the development of fully integrated water/wastewater treatment systems for zero liquid discharge. However, the application of reuse schemes requires site-specific assessment, as not all waters may be viable options for recovery.

    By De Nora Water Technologies based in Colmar, PENNSYLVANIA (USA).

  • Evaporators technology for power industry

    EVALED evaporators treat or minimize wastewater from the Power Generation Industry. Flue gas desulfurization effluents require different kinds of treatments depending on the type of fuel, water sources, and environmental regulations.

    By EVALED - Veolia Water Technologies based in Zoppola (PN), ITALY.

  • Aquatech Enhanced Oil Recovery (EOR)

    In a Steamflood Enhanced Oil Recovery (EOR) process, steam is injected in the well, lowering the viscosity of heavy oil suitable for extraction through the production wells. The fluid from the wells is a mixture of oil, water and gas and goes through a separation system to separate the three. The separated produced water is heavily contaminated with dissolved solids and hydrocarbons. Aquatech’s Steamflood Enhanced Oil Recovery (EOR) Technology offers the integrated solutions for the treatment EOR produced water for boilers, generating a purified product that can be reused for the production and injection of steam. Our turnkey approach to treatment includes coordinating the logistics of wastewater removal off-site and any sludge disposal.

    By Aquatech International Corporation based in Canonsburg, PENNSYLVANIA (USA).

  • Soil and Groundwater treatment solutions for bioremediation industry

    Today bioremediation is successfully used as soil– and groundwater remediation technology. Many bioremediation systems, both in-situ as ex-situ techniques, usually result in considerable cost savings. Since the beginning of the 1980’s both in-situ and ex-situ bioremediation projects have been successfully completed worldwide through the use of preselected and adapted bacteria. QM Environmental Services supplies a range of microbial, bioactivator and nutrient products and gas delivery systems for the use in both aerobic and anaerobic bioremediation programs. Most common contaminants ranging from aliphatic hydrocarbons such as petroleum, lubrication oils, aromatic compounds like benzene and toluene to chlorinated solvents can be treated with these products.

    By QM Environmental Services Ltd. based in The Hague, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you